Alles Gute 4 X 5W LED Ceiling Light User Manual

Alles Gute 4 X 5W LED Ceiling Light User Manual

Package Included

(For one set )

|

Basic product information

---|---
**** Ultra flat LED recessed spotlight

+ Terminal wiring

+ User Manual
| Voltage| AC 220-240 V
Material| Metal
Finish Types| Brushed
Light Direction| Adjustable
IP Rated| IP23 indoor
Color Temperature| 3000 K/4500 K/6000 K
Color Rendering Index| >80Ra
Dimmable| Not Dimmable
Guarantee| 2 Years
Cut-out size| 73-80mm(2-7/8″~3-1/8″)
** Product size| Outer Diameter: 84mm(3-1/4″) Height:** 27mm(1-1/8″)

The Name and Content of Hazardous Substances

This form is in accordance with BSEN60598-2-2:
〇： Indicates that the content of hazardous substances in related part is not detected.
X : Indicates that the content of hazardous substances in related part is below the limit of requirement specified.

Common Trouble Shooting

1. “L” wire and “N” wire are connected reversely;
2. The wire falls/off/ loosens/breaks.
3. The product itself has faults;

|

1. Check that the wires of the same color are connected.
2. Check if the wire is damaged or it is tightly connected.
3. Replace another spotlight to test.4)  If the problem still occurs, please contact us. [email protected] , we reply you in one day time

**** Reason of flicker|

1. Use a dimmer switch;
2. The wire falls off/ loosens/breaks.

|

1. Use a normal light switch because the lamp is not dimmable;
2. Check if the wire is damaged or it is tightly connected.

Short- Circuited| Instant high voltage leads to burn out.| Turn off the power immediately and check if there is a short cut in the light. Check the main power is normal, then replace the new light.
Contact Us **[[email protected]](mailto:[email protected])
Contact us on Amazon directly| ** Scan the QR Via Phone Camera

Installation Steps

Preparation works:

1. Installation shall be done by qualified technician only.
2. Ensure power is off before all operation.

Hole cutting : Use a hole saw or dry saw to cut holes from 73 to 80 mm
**∅73mm–80mm

Connect the cable: **Connect the wires using the terminals to ensure a secure connection

Install the light: Aach the LED light to the ceiling by clamping the spring clip.

Power on : Turn on the power to make sure it is working properly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>