IDO LVI-5650225 Basic WC Seat with Concealed S Lock and 2 Flush Seat Cover Instruction Manual
- June 1, 2024
- iDO
Table of Contents
IDO LVI-5650225 Basic WC Seat with Concealed S Lock and 2 Flush Seat
Covers
Product Information
Specifications
- Model: 970.197.00.0(03)
- Language: English (EN)
- Surface: High-grade
Product Usage Instructions
General Care Instructions
- Empty and dry the cistern.
- For Spira WCs, pour 0.2 liters of antifreeze agent into the trap below the exposed cistern.
- Add standard cooking oil or cling film to prevent evaporation of water.
Care Instructions for Actuators
Follow the manufacturer’s guidelines for maintaining actuators.
Care Instructions for Sanitary Ceramic Appliances
- Daily Cleaning: Use mild liquid cleaning agents and water. Dry with a lint-free cloth.
- Stubborn Stains: Use suitable cleaning agents or mild scouring liquid. Remove limescale deposits with vinegar-based cleaner.
- Heavy Deposits: Address organic deposits with appropriate cleaning methods.
FAQ
- Q: How often should I clean the ceramic appliances?
- A: Daily cleaning is recommended for maintaining hygiene. Deep cleaning for stubborn stains can be done as needed.
- Q: Can I use harsh chemicals on the high-grade surface?
- A: Avoid harsh chemicals and stick to mild cleaning agents to prevent damage to the surface.
Care instructions
You have selected a product with a high-grade surface. Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises as a result of incorrect care and handling.
General care instructions
- Use mild liquid cleaning agents and water.
- Never use sharp or pointed objects when cleaning.
- Remove any substances containing solvents immediately.
Observe the following about empty, unheated houses in winter:
- Empty and dry the cistern.
- Pour 0.3–0.4 litres of antifreeze agent into the WC pan. In the case of Spira WCs, pour an additional 0.2 liters of antifreeze agent into the trap below the exposed cistern.
- To avoid evaporation, add standard cooking oil until the surface of the water is covered with a film of oil. Cling film can also be used as an alternative to cover the surface of the water.
Care instructions for actuators
- Use hot water and soap.
- Use a soft, damp cloth.
- Never use cleaning agents that are abrasive or may scratch the surface.
- Never use cleaning agents that contain chlorine or acid or that are corrosive.
Care instructions for sanitary ceramic appliances
- Use standard cleaning agents only in compliance with the respective manufacturer’s information.
- Ensure that the seat of the ceramic appliance or the urinal lid is opened or dismounted during the application time of cleaning agents.
- Only use cleaning agents containing chlorine or ones that are abrasive or scouring in the case of heavy deposits.
| Dirt | Care measures |
|---|---|
| For daily cleaning | ▶ Use mild liquid cleaning agents and water. |
▶ If the water is extremely hard, use an acidic cleaning agent (pH value 2–3).
▶ Dry the surface with a soft, lint-free cloth.
Stubborn stains
| ▶ Generally speaking, use cleaning agents suitable for ceramic appliances or a mild scouring liquid.
▶ Remove existing limescale deposits using a mild cleaner containing vinegar.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth.
| Dirt | Care measures |
|---|---|
| With heavy deposits | Organic deposits (brown to black): |
▶ Clean the affected areas with a standard chlorine cleaner. Note the information provided by the cleaning agent manufacturer. The application time of the chlorine cleaner may not exceed 2 h.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth.
Silicate deposits (grey):
▶ Moisten a microfiber cloth with standard ceramic glass cleaner.
▶ Clean the affected areas in a circular motion. Silicate deposits are very resistant, which means that several cleaning cycles may be required.
▶ Clean the surface with water.
▶ Dry the surface with a soft, lint-free cloth.
Cleaning surfaces
- Clean the surfaces. Please follow the corresponding care instructions.
- Dry the surfaces with a soft, lint-free cloth.
CONTACTS
- Geberit International AG Schachenstrasse 77, CH-8645 Jona
- documentation@geberit.com
- www.geberit.com