KORG PC-400 Piano Bench Owner’s Manual

: September 19, 2024
: KORG

Table of Contents

Precautions
Included Parts
Assembly Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KORG PC-400 Piano Bench Owner’s Manual

Precautions

Location

Do not use on an instable floor. If the floor is instable, you may fall or the bench may be broken.

Handling

When you play piano, sit in the centre of the seat.
Do not adjust the height while sitting on this bench. The adjusting part of the bench will otherwise be stressed, and you may get hurt.
Do not use this bench as a step stool or a toy. This bench has a high weight centre and is not suitable for standing on.
Do not use with more than one person. If two or more people sit on this bench, it will become less stable and less safe.
Do not touch the adjusting part of this bench. To avoid injury, hold the bench as shown in the image below.

Care

Check the bench from time to time to ensure the legs are firmly and safely in place. If any bolt has loosened, tighten it again.
If the bench seems unstable and cannot be adjusted satisfactorily, please stop using it and ask the retailer where you purchased to fix the problem.

Keep this manual

After reading this manual, please keep it for later reference.

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside.

WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer’s or distributor’s warranty.

Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer’s or distributor’s warranty.

All product names and company names are the trademarks or registered trademarks of their respective owners.

Included Parts

Verify that all the indicated parts are present.

Assembly Instructions

With the sitting surface oriented downward, place the main bench unit on a stable surface and insert the bolt from a leg through the bolt hole in a corner bracket.
install a washer and then a nut on the bolt and tighten the nut using the wrench provided.
Make sure the nut is securely tightened, so that there is no gap next to the washer.
Repeat that process to install all the legs. Then turn the bench over, so that it is standing upright.
After assembling the bench, occasionally check the bench for any looseness or wobbling. Securely retighten any loose nuts.
For any other irregularities, stop using the bench and request repairs at the store where it was purchased.

KORG INC. 4015-2 Yanokuchi, Inagi-City, Tokyo 206-0812 JAPAN
© KORG INC. 01/2024 Printed in China