Huepar ‎902CG 360° Cross Line Laser Level User Manual

Huepar ‎902CG 360° Cross Line Laser Level

Safety Instructions

Please read thoroughly and comply with the Safety Instructions and User Manual before using this product. Failure to read and follow may void the warranty.
WARNING!
CLASS I LASER PRODUCT COMPLIES WITH CFR 1040.10 AND 1040.11

• Max. Power Output: <1mW
• Wavelength: 505m-660nm

LASER RADIATION:

• DO NOT STARE INTO BEAM.
• DO NOT DIRECT EYE EXPOSURE.
• AVOID VIEW WITH OPTICAL INSTRUMENTS.

ATTENTION: Read all instructions before operating this laser tool. Do not remove any labels from the tool.

• While the product is in operation, be careful not to expose your eyes to the emitting laser beam (Green/ Red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
• Do not attempt to view the laser beam through optical tools such as telescopes as serious eye injury may result.
• Do not disassemble or modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2 seconds. Eyelid reflexes will normally provide adequate protection.
• The following label/print samples are placed on the product to inform of the laser class for your convenience and safety.

User Guide, Maintenance and Care

• When not in use please power OFF the tool and place the pendulum lock in its locked position.
• The laser tool is sealed and calibrated at the plant to the accuracy specified.
• t’s recommended to carry out an accuracy check before its first use and periodic checks during future use especially for precise layouts.
• Do not store the laser tool in direct sunlight or expose it to high temperatures. The housing and some internal parts are made of plastics and may become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although these parts are solvent resistant, NEVER use solvents. Use a soft, dry cloth to remove moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for extended time, remove batteries before storage\ to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and disposal of electrical and electronic waste under the WEEE Directive.

Battery Safety

• Keep the battery away from children, and pets.
• Please pay attention to the position of the positive and negative pole.
• Please use large-capacity rechargeable batteries or alkaline battery above 1500mAh for each when replace batteries.
• Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.
• When the device will not be used for a long time, please remove the batteries and store them in dry condition.

Product Overview

1. Horizontal Laser Window
2. Vertical Laser Window
3. Pendulum/Transit Lock
4. Keypad
5. Battery compartment cover
6. 1/4″-20 threaded mount
7. LED indicator

Operation Modes

Turn ON the laser tool:

• Method 1: Slide the pendulum/transit switch to the Unlocked Position to turn laser tool ON.
• Method 2: Short press the Keypad to turn laser tool ON.

Turn OFF the laser tool:

• Step 1, Slide the pendulum/transit switch to the Locked Position.
• Step 2, Press the keypad and hold for ≥ 2 seconds to turn the laser tool OFF.
  Note: The laser level can only be turned off when the pendulum/transit in its Locked Position.

Lines switching:
Short press the keypad repeatedly to switch the composition of different laser lines.

Switch to Pulse Mode:

• Step 1, Slide the pendulum/transit switch to the Unlocked Position.
• Step 2, Press the keypad and hold for ≥ 2 seconds to switch to pulse mode.
  Note: Laser level can work with Laser Receiver under pulse mode.

Self-leveling & Manual Mode
Self-leveling Mode:

• is enabled when the pendulum/transit is switched to the unlocked position.
• The laser beams) blink fast when tool is out of self-leveling range (4°$1°).

Note: When using under Self-leveling mode, please place this laser tool on a level surface.

Manual/Tilt Mode:

• is enabled when the pendulum/transit is switched to the locked position.
• The laser beams) will blink about every 3-5 seconds to notify the user it is not self-leveling now.
• In manual mode, users can position the device at various angles.
  Note: The laser beam(s) projected in manual mode cannot be used as a horizontal or vertical reference in nature.

Pulse Mode (Use with Receiver)

• Under pulse mode, the laser tool can work with a laser detector for working in a brighter environment or a larger working distance.
• Switch the Pendulum/transit to the Unlocked Position, press the keypad and hold for ≥ 2 seconds to switch to pulse mode. The laser beam(s) will blink fast to notice, then the LED indicator lights up in blue.
• Press the keypad and hold for ≥ 2 seconds to return back Normal Mode. The laser beam(s) will be recovered, then the LED indicator lights off.
  Note: The laser beam in pulse mode is dimmer than in normal mode.

Specifications

1 x 360° Cross Line Laser Level

2 x 360º Cross Line Laser Level

Note:

• Appearance and specifications may differ due to product improvement.
• Working distance varies depending on the operating environment.
• When use with receiver for a larger working range, it’s necessary to turn on the pulse mode.
• Battery life depends on battery capacity and quality, it is recommended to use large-capacity rechargeable batteries.

Warranty

• The laser tool passed rigorous and comprehensive product inspection. We are confident of the quality of our products and offer outstanding guarantee for professional users of the products.\ We offer One Year Limited Warranty from date of purchasing provided that:
• Proof of purchase
• Fair wear and tear
• Have not repaired by unauthorized persons
• Has not been misused
  Defective products will be repaired or replaced, free of charge or at our discretion, if sent together with proof of purchase to our authorized distributor(s)

This Warranty does not cover:

• Faults caused by accidental damage
• Failure to use according to manufacturers’ instructions
• Defects caused by maintenance or renovation without our authorization
• Calibration and care are not covered by warranty

Note:

• To the extent permitted by law, we shall not be liable under this Warranty for indirect or consequential loss resulting from faults in this product.
• Repair or replacement under this Warranty does not affect the expiry date of the Warranty.
• This warranty is limited to purchased customers and is not permitted to transfer this warranty to other\ third parties.
• This Warranty may not be varied without our authorization.
  Please scan the QR code to register this product and enjoy a 2-year warranty. If you encounter any questions or confusion about the product, please feel free to contact us: at support@huepar.com

Changzhou Levelsure Optoelectronics Technology Co., Ltd.
www.huepar.com
E-mail :support@huepar.com
Facebook:@Huepartools
Made in China

FAQs

What is the primary feature of the Huepar ‎902CG?

The primary feature of the Huepar ‎902CG is its ability to project ultra- bright 360-degree vertical and horizontal green laser lines for comprehensive leveling coverage.

How accurate is the Huepar ‎902CG?

The Huepar ‎902CG has an accuracy of ±1/9 inch at 33 feet, making it highly reliable for precise measurements.

What is the maximum working range of the Huepar ‎902CG?

The maximum working range of the Huepar ‎902CG is up to 130 feet with standard visibility and can reach 165 feet when used with a laser receiver.

What kind of batteries does the Huepar ‎902CG use?

The Huepar ‎902CG uses four AA (LR6) batteries, and it is recommended to use large capacity rechargeable batteries for longer operation.

What is the IP rating of the Huepar ‎902CG?

The Huepar ‎902CG has an IP54 rating, meaning it is dustproof, waterproof, and shockproof, suitable for tough job site conditions.

How does the self-leveling function work in the Huepar ‎902CG?

The self-leveling function of the Huepar ‎902CG activates when it is placed on a level surface; it will blink to indicate if it is beyond its leveling range of ±4 degrees.

What is the operating time of the Huepar ‎902CG on a full charge?

The Huepar ‎902CG can operate for approximately 4 hours with all laser beams on.

What is the operating time of the Huepar ‎902CG on a full charge?

The package includes the Huepar ‎902CG laser level, a magnetic pivoting base, a laser target, four AA batteries, a cloth case, and an English user manual.

How does the Huepar ‎902CG compare to red laser levels?

The Huepar ‎902CG uses a green laser, which is at least twice as bright as red lasers using the same power source, making it more visible in various lighting conditions.

How can I clean the Huepar ‎902CG?

To clean the Huepar ‎902CG, use a soft, dry cloth to wipe the laser lens and the exterior of the device to maintain its functionality.

What types of projects is the Huepar ‎902CG ideal for?

The Huepar ‎902CG is ideal for home decoration projects, such as hanging pictures and mirrors, as well as construction tasks like wall alignment and flooring.

What is the warranty period for the Huepar ‎902CG?

The Huepar ‎902CG comes with a 12-month limited warranty, which can be extended to 24 months with product registration.

Video-Huepar ‎902CG 360° Cross Line Laser Level

Download this Manual:Huepar ‎902CG 360° Cross Line Laser Level User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>