Huepar ‎GF360G 360° Self-leveling Cross Line Laser Level User Manual

September 19, 2024
Huepar

Huepar ‎GF360G 360° Self-leveling Cross Line Laser Level

Product Overview

  1. Vertical / Horizontal Laser Window
  2. Pendulum / Transit Lock
  3. USB Charging Port
  4. Operation Button
  5. Pulse Mode Button
  6. Power Indicator
  7. 1/4″-20 threaded mount
  8. 5/8″-11 threaded mount
  9. Battery Compartment Cover
  10. Lithium Battery

Safety Instructions

Please read thoroughly and comply with the Safety Instructions and User Manual before using this product. Failure to read and follow may void the warranty.

WARNING!
CLASS I LASER PRODUCT COMPLIES WITH CFR 1040.10 AND 1040.11

  • Max. Power Output: <1mW
  • Wavelength: 505m-660nm

LASER RADIATION:

  • DO NOT STARE INTO BEAM.
  • DO NOT DIRECT EYE EXPOSURE.
  • ACOID VIEW WITH OPTICAL INSTRUMENTS.

ATTENTION:

  • Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
  • While the product is in operation, be careful not to expose your eyes to the emitting laser beam (Green/Red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
  • Do not attempt to view the laser beam through optical tools such as telescopes as serious eye injury may result.
  • Do not disassemble or modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
  • Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.
  • An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2 seconds. Eyelid reflexes will normally provide adequate protection.
  • The following label/print samples are placed on the product to inform of the laser class for your convenience and safety.

User Guide, Maintenance, and Care

  • When not in use please power OFF the tool and place the pendulum lock in its locked position.
  • The laser tool is sealed and calibrated at the plant to the accuracy specified.
  • It’s recommended to carry out an accuracy check before its first use and periodic checks during future use, especially for precise layouts.
  • Do not touch the glass window in case of leaving any fingerprint on the\ window, which may affect the working performance of the laser.
  • Do not store the laser tool in direct sunlight or expose it to high temperatures.
  • Exterior plastic parts may be cleaned with a damp cloth, NEVER use solvents. Use a soft, dry cloth to remove moisture from the tool before storage.
  • Store the tool in its case when not in use. If storing for an extended time, remove batteries before storage to prevent possible damage.
  • Do not dispose of this product with household waste.
  • Always dispose of batteries per local code.
  • Please recycle in line with local provisions for the collection and disposal of electrical and electronic waste under the WEEE Directive.

Lithium Battery Safety

Please read thoroughly and comply with the lithium battery safety instructions and precautions before charging. Failure to read and follow may result in personal injury, fire, and property damages if the battery is charged and/or used improperly.

Charging Precautions:

  • Please use the charger or adapter provided by the manufacturer.
  • The first charging time is recommended to be more than 8 hours. Each charge time is not less than 6 hours, but not more than 24 hours.
  • Please charge in 24 hours when the low battery indicator flashes or the laser tool turns off due to low power.
  • The best charging temperature: 0°C to 20°C (32F -68°F)
  • If the device is not used for a long period of time, please fully charge and remove the battery. Please store the battery in a dry and room-temperature environment.
  • If the lithium battery is not used for extended time, please charge the lithium battery once every 6 months, each charging time is not less than 6 hours.

Power Indicator(6):

  • After Power ON, the power indicator will light up in red.
  • When the power indicator flashes in red, the battery is low and the battery needs to be charged.
  • The power indicator will flash in green while being charged.
  • When charging is complete, the power indicator will light up in green continuously.

Battery Safety:

  • DO NOT SHORT CIRCUIT. Short circuits may cause fire, and injury!
  • Do not charge unattended.
  • Do not disassemble, or modify the battery.
  • Keep the battery away from children, and pets.
  • Immediately discontinue use of the battery if the battery becomes abnormal/ deformed (emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way). Please contact the manufacturer to replace it.
  • Never charge or store the batteries inside your car. Extreme temperatures (low or high) might ignite the battery, and cause a fire.
  • Do not place the battery in high-pressure containers, microwave ovens, or on induction cookware.
  • Do not carry, or store the batteries together with hairpins, necklaces, or other metal objects.
  • On (battery electrolytes) exposure to skin, flush with water immediately.
    If eye exposure occurs, flush with water for 15 minutes, and seek emergency care immediately.

Operation

Turn ON the laser tool: Method 1 – Turn ON the self-leveling mode:

  • Slide the pendulum to the Unlocked Position to turn ON the laser tool, the self-leveling mode is activated by default.
  • The laser beams) blink fast when the tool is out of self-leveling range (4° $ 1°).

Method 2 – Turn ON the manual / Tilt mode:

  • When the pendulum in Locked Position, press and hold for ≥ 2 seconds to turn ON the laser tool, the manual mode is activated by default.
  • The laser beams) will blink about every 3-5 seconds to notify the user it is not self-leveling now.
  • Under manual mode, users can position the laser tool at various angles.
    Note: Please notice the laser beams) projected in manual mode cannot be used as a horizontal or vertical reference in nature.

Turn OFF the laser tool: If the laser tool is in self-leveling mode: Slide the pendulum to the Locked Position to turn OFF the laser tool. If the laser tool is in manual mode:

  • Method 1: Slide the pendulum to the Unlocked Position, and then slide the pendulum again to the Locked Position to turn OFF the laser tool.

  • Method 2: When the pendulum is in the Locked Position, press and hold for ≥ 2 seconds to Turn OFF the laser tool.
    Note: The laser tool can only be turned off when the pendulum/transit in the Locked Position.

  • Lines Switching: Short press laser lines. repeatedly to switch the composition of different laser lines.

  • Pulse Mode (Use with Laser Receiver): Under pulse mode, the laser tool can work with the laser receiver for working in a brighter environment or a larger working distance.

  • Switch to Pulse Mode: Turn on the laser tool, short press to switch to Pulse Mode, the laser beams are dimmer in pulse mode.

  • Return Back to Normal Mode: Press again to return to In normal Mode, the brightness of the laser line will return to normal.
    Note: Keep the pulse mode on when using with receiver for larger working range.

Specifications

360° Self-leveling Cross Line Laser Level

Note:

  • Appearance and specifications may differ due to product improvement.
  • Working distance varies depending on the operating environment.
  • Keep the pulse mode on when using with receiver for larger working range.

Warranty

The laser tool passed rigorous and comprehensive product inspection. With reliable quality and outstanding guarantee, we have full confidence to serve users well.
We offer One Year Limited Warranty from date of purchasing provided that:

  • Proof of purchase
  • Fair wear and tear
  • Have not repaired by unauthorized persons
  • Has not been misused Defective products will be repaired or replaced, free of charge or at our discretion, if sent together with proof of purchase to our authorized  distributor(s)

This Warranty does not cover:

  • Faults caused by accidental damage
  • Failure to use according to manufacturers’ instructions
  • Defects caused by maintenance or renovation without our authorization
  • Calibration and care are not covered by warranty .

Note:

  • To the extent permitted by law, we shall not be liable under this Warranty for indirect or consequential loss resulting from faults in this product.
  • Repair or replacement under this Warranty does not affect the expiry date of the Warranty.
  • This warranty is limited to customers who have purchased this tool and is not permitted to transfer this warranty to other third parties.
  • This Warranty may not be varied without our authorization. Please scan the QR code to register this product and enjoy a 2-year warranty.
    If you encounter any questions or confusion about the product, please feel free to contact us: at support@huepar.com

Changzhou Levelsure Optoelectronics Technology Co., Ltd.
www.huepar.com
E-mail: support@huepar.com
Facebook: @Huepartools
Made in China

FAQs

What is the primary function of the Huepar ‎GF360G?

The Huepar ‎GF360G is designed to provide precise leveling and alignment using three 360° laser lines.

How does the self-leveling feature work in the Huepar ‎GF360G?

The Huepar ‎GF360G automatically levels itself within a ±4° range, indicating when it’s out of level with a flashing beam.

What is the working range of the Huepar ‎GF360G?

The Huepar ‎GF360G has a working range of up to 130 feet, and with a receiver, it can extend up to 200 feet.

What type of battery does the Huepar ‎GF360G use?

The Huepar ‎GF360G is powered by a rechargeable 3.7V / 5200mAh lithium-ion battery.

What is the accuracy of the Huepar ‎GF360G?

The Huepar ‎GF360G has an accuracy of ±1/9 inch at 33 feet, making it highly reliable for various applications.

How does the pulse mode function on the Huepar ‎GF360G?

The pulse mode on the Huepar ‎GF360G allows for extended-range use of up to 200 feet in bright conditions when paired with a compatible receiver.

What are the installation options for the Huepar ‎GF360G?

What is the IP rating of the Huepar ‎GF360G?

The Huepar ‎GF360G has an IP54 rating, meaning it is water and dust-resistant, and suitable for tough working environments.

How long does the battery last on the Huepar ‎GF360G?

The battery in the Huepar ‎GF360G provides up to 6 hours of continuous operation with all laser beams active.

What materials is the Huepar ‎GF360G made from?

The Huepar ‎GF360G is constructed from durable acrylonitrile butadiene styrene (ABS) for enhanced longevity.

What safety features does the Huepar ‎GF360G include?

The Huepar ‎GF360G includes safety features such as a self-leveling indicator and warnings against direct eye exposure to the laser beam.

What is included in the package with the Huepar ‎GF360G?

The package includes the Huepar ‎GF360G laser level, a rechargeable battery, charger, magnetic base, USB power cord, laser target plate, portable bag, and user manual.

Video- Huepar ‎GF360G 360° Self-leveling Cross Line Laser Level

Download this Manual:Huepar ‎GF360G 360° Self-leveling Cross Line Laser Level User Manual

Huepar ‎GF360G 360° Self-leveling Cross Line Laser Level User Manual-Device. report

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals