8BitDo NGC-01 Retro Receiver for NGC Instruction Manual
- September 18, 2024
- 8Bitdo
Table of Contents
NGC-01 Retro Receiver for NGC
“`html
Product Information
Specifications:
- Product Name: Retro Receiver for NGC
- Compatible with: NGC Console
- Controller Compatibility: Original NGC Controller, Ultimate
Bluetooth Controller, Ultimate 2.4G Controller, Ultimate 2C
Wireless Controller, Ultimate C Bluetooth Controller, Ultimate 2C
Bluetooth Controller
Product Usage Instructions
8BitDo Mod Kit for Original NGC Controller
-
With the controller off, press and hold B+START buttons for 3
seconds to enter its pairing mode, the Status LED blinks rapidly.
(This is required for the very first time only) -
Connect the NGC receiver to the controller port of NGC
console. -
Press the Pair button of the receiver, the Status LED starts to
blink rapidly. -
The Status LED of the controller and the receiver will remain
solid to indicate a successful connection.
Ultimate Bluetooth Controller
-
Turn the Mode switch to BT position.
-
Press the Home button to turn on the controller.
-
Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly. (This is required for
the very first time only) -
Connect the NGC receiver to the controller port of NGC
console. -
Press the Pair button of the receiver, the Status LED starts to
blink rapidly. -
The Status LED of the controller and the receiver will remain
solid to indicate a successful connection.
Ultimate 2.4G Controller
-
Turn the Mode switch to D position.
-
Press the Home button to turn on the controller.
-
Hold the Profile button for 5 seconds to switch to Bluetooth
connection. (The controller will vibrate once) -
Hold the Star button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly. (This is required for
the very first time only) -
Connect the NGC receiver to the controller port of NGC
console. -
Press the Pair button of the receiver, the Status LED starts to
blink rapidly. -
The Status LED of the controller and the receiver will remain
solid to indicate a successful connection.
Ultimate 2C Wireless Controller
-
Turn the Mode switch to BT position.
-
Press the Home button to turn on the controller.
-
Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly. (This is required for
the very first time only) -
Connect the NGC receiver to the controller port of NGC
console. -
Press the Pair button of the receiver, the Status LED starts to
blink rapidly. -
The Status LED of the controller and the receiver will remain
solid to indicate a successful connection.
Ultimate C Bluetooth Controller
-
Press the Home button to turn on the controller.
-
Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly. (This is required for
the very first time only) -
Connect the NGC receiver to the controller port of NGC
console. -
Press the Pair button of the receiver, the Status LED starts to
blink rapidly. -
The Status LED of the controller and the receiver will remain
solid to indicate a successful connection.
Ultimate 2C Bluetooth Controller
- Press the Home button to turn on the controller.
- Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly.
Frequently Asked Questions (FAQ)
Q: How do I know if my controller is successfully paired with
the Retro Receiver?
A: When both the Status LED of the controller and Retro Receiver
remain solid, it indicates a successful connection between
them.
Q: Do I need to repeat the pairing process every time I use a
different controller?
A: Yes, if you switch between different compatible controllers,
you need to repeat the pairing process each time you connect a new
controller to ensure a stable connection.
“`
Retro Receiver for NGC – Instruction Manual
X YA
B
NGC
01
Windows
02
NGC Console
Pair button
Status LED
· Please update the firmware of the controller and the receiver to the latest version.
8BitDo Mod Kit for Original NGC Controller
1. With the controller off, press and hold B+START buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the controller port of NGC console. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
L
START/PAUSE
R
Z Y X LS A B
Ultimate Bluetooth Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly. (This is required for
the very first time only) 4. Connect the NGC receiver to the controller port
of NGC console. 5. Press the Pair button of the receiver, the Status LED
starts to blink rapidly. 6. The Status LED of the controller and the receiver
will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Ultimate 2.4G Controller
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Profile button for 5 seconds to switch to
Bluetooth connection. (The controller will vibrate once) 4. Hold the Star
button for 3 seconds to enter its pairing mode, the Status LED will start to
blink rapidly.
(This is required for the very first time only) 5. Connect the NGC receiver to
the controller port of NGC console. 6. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 7. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Ultimate 2C Wireless Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Ultimate C Bluetooth Controller
1. Press the Home button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Ultimate 2C Bluetooth Controller
1. Press the Home button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Ultimate 3-mode Controller for Xbox
1. Turn the Mode switch to BT position. 2. Press the Xbox button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
START/PAUSE
L
R
Z
X
LS
A
B
Y
D-pad
RS
Pro 2 Bluetooth Gamepad
1. Turn the Mode switch to D position. 2. Press the Start button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B
Y
D-pad
RS
SN30 Pro+ Bluetooth Gamepad
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B Y
LS
RS
SN30 Pro for Android
1. Press the Xbox button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B Y
LS
RS
Lite SE
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE Z
R X A B Y
LS
RS
M30 Bluetooth Controller
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L
START/PAUSE Y
R
X
D-pad
Z
A
B
NEOGEO Wireless Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
D-pad
Z X A B Y
START/PAUSE
8BitDo Mod Kit for Original N64 Controller
1.Turn the Mode switch to D position. 2.Press the Start button to turn on the
controller. 3.Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly.
(This is required for the very first time only) 4.Connect the NGC receiver to
the controller port of NGC console. 5.Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6.The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
B Z
RS D-pad START/PAUSE
A LS
LS
RS
SN30 Pro Bluetooth Gamepad
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side.
(This is required for the very first time only) 3. Connect the NGC receiver to
the controller port of NGC console. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B Y
LS
RS
Lite 2
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B Y
LS
RS
Lite
1. Turn the Mode switch to X position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the controller port of NGC console. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B Y
LS
RS
Micro Bluetooth Gamepad
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for a second to enter its pairing
mode, the Status LED will start to roll side to side. (This is
required for the very first time only) 4. Connect the NGC receiver to the
controller port of NGC console. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
L
START/PAUSE
R
Z
X
D-pad
A
B Y
Arcade Stick V3
1. Turn the Mode switch to X position. 2. Turn the Connection switch to BT
position. 3. Hold the Pair button for 3 seconds to enter its pairing mode, The
four LEDs will start to blink clockwise. (This is
required for the very first time only) 4. Connect the NGC receiver to the
controller port of NGC console. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
YX
START/PAUSE Z
D-pad L R A
B
DualSense / DualSense Edge
1. With the controller off, press and hold Create+PS buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the controller port of NGC console. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B
Y
LS
RS
DualShock 4
1. With the controller off, press and hold Share+PS buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the controller port of NGC console. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B
Y
LS
RS
Switch Pro
1. With the controller off, press and hold the Pair button for 3 seconds to
enter its pairing mode, the Status LED will start to roll side to side. (This
is required for the very first time only)
2. Connect the NGC receiver to the controller port of NGC console. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B
Y
LS
RS
Xbox One / Xbox Series / Xbox Elite Series 2 / Xbox Elite Series 2-Core / Xbox Adaptive Controller
1. Press the Xbox button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly. (This is
required for the very first time only) 3. Connect the NGC receiver to the
controller port of NGC console. 4. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 5. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
L D-pad
START/PAUSE
R
Z
X A B
Y
LS
RS
Wii U Pro
1. With the controller off, press and hold the Pair button for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the controller port of NGC console. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
L
START/PAUSE
R
Z
LS
RS
X A B
Y
D-pad
01
Windows
· Windows 10 (1903) or above is required.
Pair button
Status LED
8BitDo Mod Kit for Original NGC Controller
1. With the controller off, press and hold B+START buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the USB port of your Windows device. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
LB+LT LS
Menu
RB+RT
View Y X A B
D-pad
RS
Ultimate 2.4G Controller
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Profile button for 5 seconds to switch to
Bluetooth connection. (The controller will vibrate once) 4. Hold the Star
button for 3 seconds to enter its pairing mode, the Status LED will start to
blink rapidly. (This
is required for the very first time only) 5. Connect the NGC receiver to the
USB port of your Windows device. 6. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 7. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Ultimate 2C Wireless Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly.
(This is required for the very first time only) 4. Connect the NGC receiver to
the USB port of your Windows device. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Ultimate 3-mode Controller for Xbox
1. Turn the Mode switch to BT position. 2. Press the Xbox button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly.
(This is required for the very first time only) 4. Connect the NGC receiver to
the USB port of your Windows device. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
SN30 Pro+ Bluetooth Gamepad
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side.
(This is required for the very first time only) 3. Connect the NGC receiver to
the USB port of your Windows device. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
LT LB
D-pad
View
Menu
RT
RB Y B A X Xbox
LS
RS
SN30 Pro for Android
1. Press the Xbox button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly.
(This is required for the very first time only) 3. Connect the NGC receiver to
the USB port of your Windows device. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
D-pad
B
A
X
LS
RS
Lite SE
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the USB port of your Windows device. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
View
Menu
LT D-pad
LB
LS
RS
RT Y B A X
Xbox
RB
M30 Bluetooth Controller
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side.
(This is required for the very first time only) 3. Connect the NGC receiver to
the USB port of your Windows device. 4. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 5. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
LB
Menu X Y
LT
LS View
RB RT B A Xbox
NEOGEO Wireless Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side.
(This is required for the very first time only) 4. Connect the NGC receiver to
the USB port of your Windows device. 5. Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6. The Status LED of the controller
and the receiver will remain solid to indicate a successful connection.
LB D-pad
View Menu
RB
Y
B A X Xbox
8BitDo Mod Kit for Original N64 Controller
1.Turn the Mode switch to D position. 2.Press the Start button to turn on the
controller. 3.Hold the Pair button for 3 seconds to enter its pairing mode,
the Status LED will start to blink rapidly.
(This is required for the very first time only) 4.Connect the NGC receiver to
the USB port of your Windows device. 5.Press the Pair button of the receiver,
the Status LED starts to blink rapidly. 6.The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Menu X
LT
RT
LB
RB
D-pad
B
Y
A
LS
DualShock 4
1. With the controller off, press and hold Share+PS buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the USB port of your Windows device. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
LT LB
D-pad
View
Menu
RT RB Y B A X
LS
RS
Xbox
Switch Pro
1. With the controller off, press and hold the Pair button for 3 seconds to
enter its pairing mode, the Status LED will start to roll side to side. (This
is required for the very first time only)
2. Connect the NGC receiver to the USB port of your Windows device. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Ultimate Bluetooth Controller
1. Turn the Mode switch to BT position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to blink rapidly. (This is
required for the very first time only) 4. Connect the NGC receiver to the USB
port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Ultimate C Bluetooth Controller
1. Press the Home button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly. (This
is required for the very first time only) 3. Connect the NGC receiver to the
USB port of your Windows device. 4. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 5. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Ultimate 2C Bluetooth Controller
1. Press the Home button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly. (This
is required for the very first time only) 3. Connect the NGC receiver to the
USB port of your Windows device. 4. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 5. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
D-pad
RS
Pro 2 Bluetooth Gamepad
1. Turn the Mode switch to D position. 2. Press the Start button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side. (This
is required for the very first time only) 4. Connect the NGC receiver to the
USB port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
LT LB
D-pad
View
Menu
RT
RB Y B A X Xbox
LS
RS
SN30 Pro Bluetooth Gamepad
1. Press the B+Start buttons to turn on the controller. 2. Hold the Pair
button for 3 seconds to enter its pairing mode, the Status LED will start to
roll side to side. (This
is required for the very first time only) 3. Connect the NGC receiver to the
USB port of your Windows device. 4. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 5. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
LT LB
D-pad
View
Menu
RT
RB Y B A X
Xbox
LS
RS
Lite 2
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side. (This
is required for the very first time only) 4. Connect the NGC receiver to the
USB port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
Xbox
D-pad
RS
Lite
1. Turn the Mode switch to X position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for 3 seconds to enter its pairing
mode, the Status LED will start to roll side to side. (This
is required for the very first time only) 4. Connect the NGC receiver to the
USB port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
LT LB
D-pad
View
Menu
RT RB
Y B A X Xbox
LS
RS
Micro Bluetooth Gamepad
1. Turn the Mode switch to D position. 2. Press the Home button to turn on
the controller. 3. Hold the Pair button for a second to enter its pairing
mode, the Status LED will start to roll side to side. (This is
required for the very first time only) 4. Connect the NGC receiver to the USB
port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
View
Menu
LT
RT
LB
RB
Y D-pad
B
A
X
Xbox
Arcade Stick V3
1. Turn the Mode switch to X position. 2. Turn the Connection switch to BT
position. 3. Hold the Pair button for 3 seconds to enter its pairing mode, The
four LEDs will start to blink clockwise. (This is
required for the very first time only) 4. Connect the NGC receiver to the USB
port of your Windows device. 5. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 6. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
XY
View
RB
Menu
LB
LT RT B
A
DualSense / DualSense Edge
1. With the controller off, press and hold Create+PS buttons for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the USB port of your Windows device. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
LT LB
D-pad
View
Menu
RT
RB
Y B A X
LS
RS
Xbox
Xbox One / Xbox Series / Xbox Elite Series 2 / Xbox Elite Series 2-Core / Xbox Adaptive Controller
1. Press the Xbox button to turn on the controller. 2. Hold the Pair button
for 3 seconds to enter its pairing mode, the Status LED will start to blink
rapidly. (This is
required for the very first time only) 3. Connect the NGC receiver to the USB
port of your Windows device. 4. Press the Pair button of the receiver, the
Status LED starts to blink rapidly. 5. The Status LED of the controller and
the receiver will remain solid to indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
Y
LS
B
A
X
LS
D-pad
RS
Wii U Pro
1. With the controller off, press and hold the Pair button for 3 seconds to
enter its pairing mode, the Status LED blinks rapidly. (This is required for
the very first time only)
2. Connect the NGC receiver to the USB port of your Windows device. 3. Press
the Pair button of the receiver, the Status LED starts to blink rapidly. 4.
The Status LED of the controller and the receiver will remain solid to
indicate a successful connection.
Xbox
View
Menu
LT
RT
LB
RB
LS
RS
Y B A X
D-pad
Safety Warnings:
· Please always use batteries, chargers, and accessories provided by the
manufacturer. · The manufacturer is not liable for any safety issues arising
from the use of non-manufacturer-approved accessories. · Do not attempt to
disassemble, modify, or repair the device yourself. Unauthorized actions may
result in serious injury. · Avoid crushing, disassembling, puncturing, or
attempting to modify the device or its battery, as these actions can be
dangerous. · Any unauthorized changes or modifications to the device will void
the manufacturer’s warranty.
Support
· Please visit support.8bitdo.com for further information & additional
support.
02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>