VALEMO MD10,MD30 Zone Valve Motor Instructions

: September 17, 2024
: VALEMO

Table of Contents

MD10,MD30 Zone Valve Motor
Specifications:
Product Information:
Notes and Warnings:
Contact Information:
Product Usage Instructions:
Installation:
Operation:
Maintenance:
- Frequently Asked Questions (FAQ):
Q: Can the Valemo Zone Valve Motor be used with other valve
Q: What should I do if the motor stops working?

MD10,MD30 Zone Valve Motor

“`html

Specifications:

Model Number	Voltage	Power Consumption	Output	Speed
MD10	24VAC	6.5W	7VA	5 RPM @ 50Hz
MD30	230VAC	6.5W	7VA	4 RPM @ 50Hz

Product Information:

The Valemo Zone Valve Motor is a synchronous motor designed to
replace the counterpart in spring-return zone valves of popular
brands like Honeywell, Belimo, Erie, ESBE, Orkli, and Caleffi. It
comes in two models, MD10 and MD30, each with specific voltage
requirements and output speeds.

Notes and Warnings:

Please refer to the user manual for detailed installation and
usage instructions. Follow all safety guidelines to prevent any
accidents or damages.

Contact Information:

Email: david.ou@valemocontrols.com

Purchase Valemo products at: www.valemo-eu.com (For European
customers)

Valemo Controls Limited | Hong Kong

Product Usage Instructions:

Installation:

Ensure the power source matches the voltage requirement of the
specific model (24VAC for MD10, 230VAC for MD30).
Follow the wiring diagram provided in the user manual to
connect the motor correctly.
Secure the motor in place according to the valve manufacturer’s
guidelines.

Operation:

To operate the Valemo Zone Valve Motor:

Apply power to the motor as per the voltage
specifications.
The motor will start turning at the designated speed (5 RPM for
MD10, 4 RPM for MD30) when powered on.
Monitor the motor’s performance to ensure proper functioning of
the valve system.

Maintenance:

Regularly inspect the motor for any signs of wear or damage.
Clean the motor as needed to maintain optimal performance. Refer to
the user manual for detailed maintenance instructions.

Frequently Asked Questions (FAQ):

Q: Can the Valemo Zone Valve Motor be used with other valve

brands?

A: The motor is specifically designed to replace the counterpart
in spring-return zone valves of popular brands like Honeywell,
Belimo, Erie, ESBE, Orkli, and Caleffi. It is recommended to use it
with compatible valves for best results.

Q: What should I do if the motor stops working?

A: Check the power supply, wiring connections, and motor
condition. If issues persist, contact Valemo customer support for
assistance.

“`

VALEMO ZONE VALVE MOTOR

V1.0

Introduction

This Valemo synchronous motor is designed to replace the counterpart in spring-return zone valves of most of the popular brands, such as Honeywell, Belimo, Erie, ESBE, Orkli, Caleffi, etc.

Specifications

Model Number Voltage Power Consumption Output Speed

MD10 24VAC 6.5W 7VA 5 RPM @ 50Hz

MD30 230VAC 6.5W 7VA 4 RPM @ 50Hz

Dimensionsmm)

Notes and warnings

Please ensure the original motor has the same outline before installation. This motor cannot be used to replace motors in damper actuators, which controls air flow and have different RPM and dimensions. There may be slight size differences among the original motors produced by various manufacturers. Please manually make adjustment during installation if necessary. Make sure installed motor pinion mate well with final gear, with proper grease. The motor works in 230VAC. Please make sure the power is off before installation.
Contact us
Email: david.ou@valemocontrols.com
Purchase Valemo products
Web: www.valemo-eu.com (For European customers)
Valemo Controls Limited | Hong Kong