THIRDREALITY 20240812 Gen3 Smart Switch Instruction Manual
- September 17, 2024
- THIRDREALITY
Table of Contents
20240812 Gen3 Smart Switch
“`html
Product Information
This smart switch is designed to work with various smart home
systems including Third Reality, Amazon Echo, SmartThings, Hubitat,
and Home Assistant ZHA.
Specifications:
-
Compatibility: Third Reality, Amazon Echo, SmartThings,
Hubitat, Home Assistant ZHA -
Wireless Protocol: Zigbee
-
Control: Via respective apps or voice assistants
-
Power Source: Battery operated
-
Color: White
Product Usage Instructions
Pairing with Third Reality
-
Register and sign in to your THIRDREALITY account and add the
THIRDREALITY hub. -
Long press the button of the switch for 30 seconds until the
LED blinks rapidly to enter pairing mode. -
In the Third Reality App, tap the “+” icon to add the
device. -
Create routines to control other connected devices.
Pairing with Amazon Echo
-
Ask Alexa to check for updates before pairing.
-
Long press the button of the switch for 30 seconds until the
LED blinks rapidly to enter pairing mode. -
In the Alexa App, tap the “+” icon, choose Zigbee, and add the
device. -
Create routines with the device using Alexa routines
feature.
Frequently Asked Questions (FAQ)
Q: Can this switch work with multiple smart home systems
simultaneously?
A: No, this switch can only be paired and controlled by one
smart home system at a time. You need to unpair it from one system
before connecting it to another.
Q: What is the range of this smart switch?
A: The range of the smart switch depends on the Zigbee signal
strength in your home environment. Generally, it can work within a
range of up to 100 feet indoors.
“`
20240812
Pairing with Third Reality
App: Third Reality App Hub: Third Reality Smart Hub/Smart Hub Gen2 Plus
Pairing steps:
- Register and sign in your THIRDREALITY account, and add the THIRDREALITY
hub. 2 Long press the button of the switch for 30 seconds until the LED turns
fast blinking,
make sure it is in pairing mode. 3 Tab “+” in the right of Smart Hub to add device. 4) Create routines to control other connected devices.
Pairing with Amazon Echo
Hub: Echo speakers with built-in Zigbee hub, Echo 4th Gen, Echo Plus 1st & 2nd Gen, Echo Studio App: Amazon Alexa
Pairing steps: - Ask Alexa to check for updates before pairing. 2 Long press the button of
the switch for 30 seconds until the LED turns fast blinking,
make sure it is in pairing mode. 3 Tab “+” in the Alexa App, choose “Zigbee” and “others” to add device. 4) You can create routines with the device.
Pairing with SmartThings
App: SmartThings App Devices: SmartThings Hub 2nd Gen(2015) and 3rd Gen.(2018), Aeotec Smart Home Hub.
Pairing steps: - Check for updates to make sure the SmartThings Hub firmware is up to date
before pairing.
2 Add SmartThings drivers for Smart Switch Gen3 Open this link in your PC browser. Log in your SmartThings Account. https://bestow- regional.api.smartthings.com/invite/adMKr50EXzj9 Click “Enroll” –“Available Drivers” — “Install” to install the Zigbee Contact driver.
3 Long press the button of the switch for 30 seconds until the LED turns fast blinking, make sure it is in pairing mode. - Open the SmartThings App, tap”+”on the upper right corner to “Add device”and then tap”Scan”to”Scan for nearby devices”.
- The device will be paired with the SmartThings hub in a few seconds. 6
Create routines to control connected devices.
Pairing with Hubitat
App: Third Reality App Hub: Third Reality Smart Hub
Pairing steps: - Tab “Add Device” in Hubitat Devices page. 2 Long press the button of the
switch for 30 seconds until the LED turns fast blinking
make sure it is in pairing mode. 4) Choose “Zigbee”, then “Start Zigbee Pairing”. 5) Create a device name and room name, click “Next” to complete pairing.
Pairing with Home Assistant ZHA
Pairing steps: - Long press the button of the switch for 30 seconds until the LED turns fast
blinking make sure it is in pairing mode.
2 Make sure Home Assistant Integrations Zigbee Home Automation Setup is ready, then go to”Configuration”page, click”integration”.
3 Click”Devices”on the Zigbee item, the click”Add Devices”. 4 After the pairing is completed, it will show up in the page. 5 Back to”Devices”page, then you can find the device dded. 6 Click to enter in the control interface to set the device. 7 Click”+”belongs to Automation and then you can add different actions.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help important announcement. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.