THIRDREALITY UM_20221219 Temperature and Humidity Sensor User Manual
- September 3, 2024
- THIRDREALITY
Table of Contents
UM_20221219 Temperature and Humidity Sensor
“`html
Specifications:
- Name: Temperature and Humidity Sensor
- Model: 3RTHS24BZ
- LCD Screen: Yes
- Dimensions: Not specified
- Net Weight: Not specified
- Operating Voltage: 3V
- Battery Type: Not specified
- Wireless Connectivity: Not specified
- Working Condition: Not specified
- Temperature Range: Not specified
- Humidity Range: Not specified
- Temperature Accuracy: Not specified
- Humidity Accuracy: Not specified
Product Overview:
The Temperature and Humidity Sensor is designed to monitor and
display temperature and humidity levels. It features a side button
for easy operation and comes with a protective film to ensure
durability.
Installation:
To install the sensor, follow these steps:
-
Press and hold the side button for 5 seconds to put the sensor
into pairing mode. -
Remove the protective film on the ventilation holes, carefully
remove the kickstand, open the battery cover, remove the plastic
insulation sheet to power on the sensor.
Setup:
Follow these steps to set up the sensor:
-
If successfully paired, a solid cloud icon on the LCD screen
will indicate completion of the pairing process. -
If not paired within 3 minutes, press and hold the side button
for 5 seconds to put it back into pairing mode.
Pairing with Third Reality:
To pair the sensor with Third Reality:
-
Register and sign in to your THIRDREALITY account and add the
THIRDREALITY hub. -
Remove the kickstand, open the battery cover, or press and hold
the side button for 5 seconds to enter pairing mode. -
In the THIRDREALITY App, choose the Temperature and Humidity
Sensor Icon and follow on-screen instructions for pairing. -
The sensor will be discovered as Temperature and Humidity
Sensor 1 within one minute, displaying data in the device
list. -
You can view details like MAC address, battery level, software
version, history records, rename the sensor, and check for updates
in the device page. -
Note that when enabling skills in Alexa app, you can read
temperature readings but cannot create routines with the
sensor.
FAQ:
Q: How do I switch between Celsius and Fahrenheit on the
sensor?
A: Press the side button to toggle between Celsius
and Fahrenheit temperature display.
Q: What should I do if the sensor does not pair
successfully?
A: If not paired within 3 minutes, press and hold
the side button for 5 seconds to put it back into pairing mode.
Q: Can I create routines with the temperature sensor in
Alexa app?
A: No, you can only read temperature readings but
not create routines with the sensor in Alexa app.
“`
Temperature and Humidity Sensor
User Manual
Index
Product Overview
1
Installation
2
Side Button
3
Setup
3
Specifications
4
Pairing with THIRDREALITY
5
Pairing with Amazon Echo
8
Pairing with SmartThings
10
Pairing with Hubitat
14
Pairing with Home Assistant
16
FAQ
18
FCC regulatory conformance
19
RF Exposure
20
Limited Warranty
20
Product Overview
Front View
Protective Film
Rear View
Temperature and Humidity Sensor
Model No.: 3RTHS24BZ FCC ID: 2AOCT-3RTHS24BZ ID: 28296-3RTHS24BZ Input: 3V
Made In China Third Reality, Inc.
REMOVE
Ventilation Holes and Protective Film Side Button
Plastic Insulation Sheet AAA Battery × 2 included)
1
Installation
Kickstand
Side Button
- Press and hold the side button for 5 seconds and release to put the sensor
into pairing mode.
2 Press the side button to switch the temperature display between Celsius and Fahrenheit.
2
Setup
- Remove the protective film on the ventilation holes, remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on, the blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode.
Temperature and Humidity Sensor
Model No.: 3RTHS24BZ FCC ID: 2AOCT-3RTHS24BZ ID: 28296-3RTHS24BZ Input: 3V
Made In China Third Reality, Inc.
REMOVE BEFORE USE
REMOVE
- A solid cloud icon on the LCD screen indicates the pairing process is
successfully completed.
3 Please note that if not successfully paired within 3 minutes, the sensor will quit pairing mode. Press and hold the side button for 5 seconds and release the hold to put it into paring mode again.
3
Specifications
Name Model LCD Screen Dimensions Net Weight Operating Voltage Battery Type Wireless Connectivity Working condition Temperature Range Humidity Range Temperature Accuracy Humidity Accuracy
Temperature and Humidity Sensor 3RTHS24BZ 41.5mm × 38.0mm 61.5mm × 61.5mm × 18mm 64g DC 3V AAA battery × 2 (included) ZigBee 3.0 Indoor Use Only -10~5014~122 0-95% ±1 ±2%
4
Pairing with Third Reality
App: Third Reality App Hub: Third Reality Smart Hub
Pair the Temperature and Humidity sensor with Third Reality Smart Hub.
Pairing steps:
-
Register and sign in your THIRDREALITY account, and add the THIRDREALITY hub.
2 Remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or press and hold the side button on the left side of the sensor for 5 seconds and release the hold; The blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode.
3 Tap”+”in the upper right in THIRDREALITY App, scroll down to choose the Temperature and Humidity Sensor Icon and follow the on-screen instructions to start the pairing process. 5 -
The sensor will be discovered within one minute as”Temperature and Humidity Sensor 1″, the temperature and humidity data will be displayed in the device list .
6 -
Tap the Temperature and Humidity Sensor icon to enter the device page, you can see information like the MAC address, battery level, software version and history records etc, you can also rename the Temperature and Humidity Sensor, and check for software updates.
-
When enable skills in you Alexa app after pairing the Temperature and Humidity Sensor to the hub, you can only read the temperature readings, but not able to create routines with the temperature sensor in your Alexa app.
7
Pairing with Amazon Echo
App: Amazon Alexa App
Pairing with Echo devices with built-in ZigBee hubs such As Echo V4, Echo Plus
V1 and V2, Echo Studio, and Eero 6 and 6 pro.
Pairing steps:
-
Ask Alexa to check for updates before pairing. 2 Remove the kickstand on the back of the Temperature and
Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or press and hold the side button on the left side of the sensor for 5 seconds and release the hold; The blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode. 3 Ask Alexa to discover devices, or open Alexa App, go to device page, tap”+”on top right, choose”Add Device”, scroll down to the bottom and tap”other”, tap”DISCOVER DEVICES”, the Temperature and Humidity Sensor will be paired with your Echo device in a few seconds.
8 -
Tap device icon to enter the device page, tap the setting icon to enter the settings page, you can edit the name of the sensor; Or you can create routines with the sensor to control other connected devices.
9
Pairing with SmartThings
App: SmartThings App Devices: SmartThings Hub 2nd Gen(2015) and 3rd
Gen.(2018), Aeotec Smart Home Hub.
Pairing steps:
-
Before pairing, check for updates to make sure the SmartThings Hub firmware is up to date.
2 Remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or press and hold the side button on the left side of the sensor for 5 seconds and release the hold; The blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode. -
Open the SmartThings App, tap”+”on the upper right corner to “Add device”and then tap”Scan”to”Scan for nearby devices”.
10 -
The Smart Button will be paired with the SmartThings hub in a few seconds.
5 Create routines to control connected devices. 6) When enable skills in you Alexa app after pairing the Tem-
perature and Humidity Sensor to the hub, you can only read the temperature readings, but not able to create routines with the temperature sensor in your Alexa app.
11
How to add SmartThings drivers for Third Reality T&H Sensor
1 Open this link in your PC browser. https://bestow-
regional.api.smartthings.com/invite/adMKr50EXzj9
2 Log in your SmartThings Account. 3 Click”Enroll”-“- Available
Drivers”–“Install”to install the
device driver as needed.
12
- Reboot your SmartThings hub by powering it off and power it on again.
5″Scan for Nearby Devices”in SmartThings App to pair the THIRDRELAITY devices with your SmartThings hub. - You can change the driver of the sensor in SmartThings App.
13
Pairing with Hubitat
Website: http://find.hubitat.com/
Pairing steps:
-
Remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on; Or press and hold the side button on the left side of the sensor for 5 seconds and release the hold; The blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode.
2 Visit your Hubitat Elevation hub device page from your web browser, select the Devices menu item from the sidebar, then select Discover Devices in the upper right.
14 -
Click Start ZigBee Pairing button after you select a ZigBee device type, the Start ZigBee Pairing button will put the hub in ZigBee pairing mode for 60 seconds.
-
After pairing process is completed successfully, you can rename it if needed.
5 Now you can see the Temperature and Humidity Sensor on the Devices page.
15
Pairing with Home Assistant
Pairing steps:
-
Remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet and the sensor is powered on, the blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode.
2 Make sure Home Assistant Integrations ZigBee Home Automation Setup is ready, then go to”Configuration”page, click”integration”. -
Then click the”Devices”on the ZigBee item, the click “Add Devices”. 16
-
After the pairing is completed successfully, it will show up in the page.
-
Back to”Devices”page, then you can find the Temperature and Humidity Sensor added.
-
Click to enter in the control interface to set the Temperature and Humidity Sensor.
-
Click”+”belongs to Automation and then you can add different actions.
17
FAQ
- How to factory reset the Temperature and Humidity Sensor? Press and hold the side button on the left side of the sensor for 5 seconds and release the hold, the blinking cloud icon on the the LCD screen indicates the sensor is in pairing mode.
- Why does the temperature fluctuate as I press the side button? The side button is located near the ventilation hole, so the temperature reading rises as your finger press the side button, you need to wait for 20 seconds before the temperature reading returns to normal.
- The LCD screen gets dirty, how to clean it? You can clean the LCD screen with alcohol wipes or damp soft cloth, prevent water from getting into the monitor when cleaning it.
- What is the battery life? 1 year battery life with typical usage.
18
FCC regulatory conformance
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
19
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help important announcement.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Limited Warranty
For limited warranty, please visit www.3reality.com/device-
support
For customer support, please contact us at info@3reality.com
or visit www.3reality.com
For help and troubleshooting related to Amazon Alexa, visit
the Alexa app.
20