HSNi 9597484 Projection Screen User Guide

HSNi 9597484 Projection Screen

Quick Start Guide

How to install projection screen:

1. Package includes screen, mounting hooks, and adhesive strips.
2. Unfold the screen and locate a desired position on the wal for installation. Mark the position of the grommets on the wal.
3. Remove one side of the adhesive strips and attach them to the mounting hooks.
4. Remove the other side of the adhesive strips and attach the mounting hooks to the positions you marked on the wall in Step 2.
5. Mount the screen on the hooks.

How to connect PJ300 to a video source

Gaming system
HDMI* (best quality)

1.  Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the
   HDMI output on your media player or computer.

2. Set the projector’s Source to the connected HDMI input and use the controls on the
   connected device to select and play media
   Computer/laptop
   HDMI* (best quality)

3. Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the
   HDMI output on your media player or computer.

4.  Set the projector’s Source to the connected HDMI input and use the controls on the
   connected device to select and play media

**VGA Cable***

1. Using a VGA cable, connect the VGA input on the projector to the VGA output on your computer.
2.  Set the projector’s Source to PC and use the controls on the computer to select and play media.

Smart Phones

Casting Device
Most casting devices can connect to this projector via HDMI input and allow streaming content controlled from your smartphone or by screen mirroring. Refer to the casting device user manual for further instructions.

**HDMI to Smartphone adapter***
The process is the same as connecting an HDMI cable from the projector to a computer/laptop or a gaming system.

How to connect the speaker to PJ300:

Wireless connection

1.  Enable Bluetooth on the included speaker (ISB150) or on another Bluetooth enabled speaker
2.  Power on the projector (PJ300B) and make sure the projector’s Bluetooth is ON from the Sound menu in the projector’s settings.
3.  The projector will begin searching for nearby Bluetooth devices to connect to and will automatically initiate pairing. Note: disable Bluetooth on all receivers to which you do not wish to connect.
4.  When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a chime or tone and the projector will display the connected speaker or soundbar name on the top right portion of the Main Menu screen
5.  If either of the devices is reset, repeat the steps above to repair

Note: Bluetooth connectivity is only possible between the projector and external speakers. Smartphones can’t connect to this projector via Bluetooth.

Wired connection
Using male-to-male AUX 3.5 mm cable (not included), connect one end to the projector and the other end to the included speaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>