THIRDREALITY 20240812 Door Sensor Instruction Manual

THIRDREALITY 20240812 Door Sensor

Mounting Kit

• Screw x 4

• Battery x 2

• Double-sided Tape

Setting up your Door Sensor

1. Follow the instructions and set up your compatible Zigbee hub.

2. The sensor comes with two parts, A and B (Fig. 1). Press to open part A (Fig. 2), install the batteries and close the back cover, the LED indicator flashes rapidly in blue, the sensor is now ready for setup. Long press the reset button (Fig. 3) for 3 seconds to factory reset the sensor and put it into pairing mode again when needed.

3. Follow the instructions and pair the sensor with your Zigbee hub.

Pairing with Different Hubs

Pairing with Amazon Echo

Compatible Device : Echo V4, Echo Plus V1 & V2, Echo Studio, Echo Show 10 Gen2 & Gen3
App: Amazon Alexa App

Pairing Steps:

1. Make sure the app and the firmware of your Echo devices has been updated to the latest version.
2. Start adding devices by saying “Alexa, discover my devices”, or open Alexa App, go to device page, tap “+” on top right, choose “Add Device”, then click “other” by sliding down, tap “DISCOVER DEVICES”, the sensor will be paired to Alexa within seconds.

Pairing with Eero

Compatible Devices : Eero 6 & Eero 6 Pro
App: Eero App Alexa App

Pairing Steps:

1. Make sure that the Eero App account is logged in and the gateway is properly connected.
2. Open Alexa App and register your account, then enable Eero Skill to Alexa App.
3. Make sure the firmware of your Echo devices have been updated to the latest version, start adding devices by saying “Alexa, discover my devices”, or open Alexa App, go to device page, tap “+” on top right, choose “Add Device”, then click “other” by sliding down, tap “DISCOVER DEVICES”, the sensor will be added within seconds.

Pairing with SmartThings

Compatible Devices: SmartThings Hub 2015 & 2018, Aeotec
App: SmartThings App

Pairing Steps

1. Make sure the app and the firmware of the SmartThings hub has been updated to the latest version before pairing.

2. Add SmartThings drivers for Door Sensor

   • Open this link in your PC browser. Log in your SmartThings Account.
     https://bestow-regional.api.smartthings.com/invite/adMKr50EXzj9

   • Click “Enroll” –“Available Drivers” — “Install” to install the Zigbee Contact driver.

   • Open SmartThings App, tap “+” on top right.
     Then click “Add Devices”, Choose “Scan nearby”, the sensor will be added within seconds.

Pairing with Home Assistant

ZigBee Home Automation(ZHA)

“Settings”-“Devices & Services”-“Zigbee Home Automation”, then click “+ Add Device”, the sensor will be added within seconds.

ZigBee2MQTT(Z2M)

Start ZigBee2MQTT addon, then click “Permit join” to start adding devices, the sensor will be added within seconds.

Pairing with Third Reality

Hub: Third Reality Smart Hub
App: Third Reality App

Pairing Steps:

1. Make sure the app and the firmware of the hub has been updated to the latest version.
2. Open Third Reality App, go to device page, tap “+” in the up right and follow on-screen instructions to add device.

Pairing with Hubitat

Website: http://find.hubitat.com/

Pairing Steps:

1. Log in the website, click “Connect to Hub”.
2. Click “Devices”, “Add”, “Add Devices Manually”, “ZigBee”, then “Start ZigBee Pairing”.

Mounting your Door Sensor

1. Make sure the installation surfaces are clean and dry before installation.
2. Attach Part A and B with double-sided tape separately, make sure the marks on two parts should be aligned and facing each other, the space in between should be less than 5/8 inches(16mm) when closed.

Troubleshooting

Why can’t my Echo discover the door sensor? It has a ZigBee hub built-in.

• Reboot your Echo by unplugging/plugging it back in.
• Set the door sensor into pairing mode by long press the reset button inside the device, the blue LED flashes rapidly.
• Keep the door sensor near the Echo with ZigBee hub build-in, then ask Alexa to “discover devices”.
• If it is still not working, please factory reset your Echo, re-add echo then re-discover device again, then pair it with your Echo device again.

I have a SmartThings hub, do I need a special hub for the door sensor?

• Enable the SmartThings Skill in your Alexa app and sign in to link your accounts on both platforms.
• Go to Devices tabin your Alexa app and add devices to sync your devices under SmartThings to Alexa: “+” icon(on the upper right corner)->Add Device->Other.
• Create a routine for the door sensor and light switches in your Alexa app, you can use door open/close to trigger things like light on/off, or you can set an Alexa “custom message” when the door sensor detects a door is opened.

Why nothing shows up for devices or group on the Third Reality app? I am using a SmartThings hub.

Because you are using Echo (Alexa APP) and SmartThings (SmartThings APP), it will bypass Third Reality app. Only when you are using Third Reality Hub (which is equivalent to SmartThings Hub), then the Third Reality app is required and will show the device in the app.

FCC Regulatory Conformance

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty, please visit www.3reality.com/devicesupport
For customer support, please contact us at
info@3reality.com or visit www.3reality.com
For help and troubleshooting related to Amazon Alexa, visit the Alexa app.

References

• Quick Start Guide
• ings.com/invite/adMKr50EXzj9
• ThirdReality
• DeviceSupport – ThirdReality

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>