infobit 8K104 48Gbps 1×4 Splitter iSwitch User Manual
- September 17, 2024
- infobit
Table of Contents
infobit 8K104 48Gbps 1×4 Splitter iSwitch
Product Information
Specifications
- Technical HDMI Compliance: HDMI 2.1
- HDCP Compliance: HDCP 2.3, HDCP 1.4
- Video Bandwidth: 48Gbps FRL and 18Gbps TMDS
- Video Resolution: Up to 8K@60Hz 4:2:0 12bit, 4K@120Hz 4:4:4 12bit, 8K@30Hz 4:4:4 12bit
- Color Depth: 8/10/12-bit
- Color Space: RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0
- HDR Support: HDR, HDR10, HDR10+, Dolby Vision, HLG
- Audio Formats: Various HDMI audio formats supported
- ESD Protection: Input and Output
- Power Supply: Input – AC 100-240V 50/60Hz, Output – DC 5V/2A
- Power Consumption: 6W (Max)
- Operation Temperature: Range specified
- Recommended HDMI Cable Lengths:
- 3m/10ft for HDMI IN / OUT (Ultra HDMI 2.1)
- 8m/26ft
- 12m/39ft
- 15m/49ft for 1080P
Product Usage Instructions
Setup and Connections
- Ensure the device is powered off before making any connections.
- Connect the HDMI input port to the video source device using a high-speed HDMI cable.
- Connect the HDMI output ports to the display devices using appropriate HDMI cables.
- Connect the power supply to the power port of the device.
Powering On and Usage
- Power on the device using the power button.
- Use the front panel controls to select the desired output port.
- Adjust any EDID settings as required using the DIP switch on the rear panel.
Maintenance and Care
- Avoid exposing the device to extreme temperatures or moisture.
- Clean the device with a soft, dry cloth. Do not use liquid or chemical cleaners.
FAQ
Q: What is the recommended HDMI cable length for optimal performance?
A: For best results, use a Premium High-Speed HDMI cable with lengths specified in the user manual.
Q: How do I know if the device is powered on?
A: The red POWER LED on the front panel indicates that the device is powered on.
Q: How can I update the firmware of the device?
A: Connect a USB drive with the firmware update file to the SERVICE port on the rear panel as instructed in the manual.
Thank you for purchasing this product
- For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
- This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shocks, lightning strikes, etc.
- Use of surge protection systems is highly recommended to protect and extend the life of your equipment.
Introduction
- This 1×4 splitter can distribute one HDMI source signal to any four display devices. Video resolution is up to 8K@60Hz 4:2:0 12bit. It supports data rates up to 48Gbps to comply with HDMI 2.1 and HDCP 2.3 requirements.
- It includes several features for ease of integration, such as EDID management and cable equalization. Resolution downscaling is also supported.
- It is an easy-to-use solution for HDMI installation, and can transmit the audio signal to any sound system with 5.1/2.0CH.
- This multi-functional product can be widely applied in scenarios of demonstration, video conference, multimedia teaching and other occassions.
Features
- HDCP 2.3 compliant
- Supports 48Gbps FRL and 18Gbps TMDS video bandwidth
- Supports resolution up to 8K@60Hz 4:2:0 12bit, 4K@120Hz 4:4:4 12bit 8K@30Hz 4:4:4 12bit, as specified in HDMI 2.1
- VRR, ALLM, QMS, QFT, SBTM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass-through
- Support HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, Atmos, DTS-HD Master Audio
- Supports resolution auto downscaling and converting on each output port
- Advanced EDID management
Package Contents
- 1 × 48Gbps 1×4 Splitter
- 1 × 5V/2A Multinational Power Supply
- 1 × User Manual
Specifications
Technical
HDMI Compliance| HDMI 2.1
HDCP Compliance| HDCP 2.3, HDCP 1.4
Video Bandwidth| 48Gbps FRL and 18Gbps TMDS
Video Resolution| Up to 8K@60Hz 4:2:0 12bit, 4K@120Hz 4:4:4 12bit, 8K@30Hz
4:4:4 12bit
Color Depth| 8/10/12-bit
Color Space| RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
** Audio Formats| HDMI input/output: LPCM, Dolby Digital/Plus/EX,
Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD
Master Audio, DSD Audio de-embedding output:** Optical: LPCM/ Dolby/ DTS
5.1CH Analog: LPCM 2CH
ESD Protection| IEC 61000-4-2:
±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Input| 1 × HDMI IN [Type A, 19-pin female]
**** Output| 4 × HDMI OUT [Type A, 19-pin female] 1 × OPTICAL [S/PDIF]
1 × L/R [3.5mm Stereo Mini-jack]
Control| 1 × SERVICE [USB Type C, Update port]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 176mm (W) × 68mm (D) × 18mm (H)
Weight| 295g
Power Supply| Input: AC 100-240V 50/60Hz, Output: DC 5V/2A (US/EU standards,
CE/FCC/UL certified)
Power Consumption| 6W (Max)
---|---
Operation Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Recommended HDMI Cable
Video Resolution| 8K| 4K60| 4K24| 1080P
HDMI Cable Length (HDMI IN / OUT)| 3m/10ft (Ultra HDMI 2.1)|
8m/26ft| 12m/39ft| 15m/49ft
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Front Panel
Rear Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | When the device is powered on, the red LED will be on. |
| 2 | IN LED | When the HDMI IN port connects to an active source device, the |
green LED will be on.
3| OUT LED (1~4)| When the HDMI OUT 1/2/3/4 port connects a display device and
outputs a signal, the corresponding green LED will be on.
**** 4
| ****
**** EDID DIP switch
| Use the DIP switch to set EDID. [DIP]=111: Copy OUT port sink EDID (as
factory default) [DIP]=110: 4K60(4:4:4), 2.0CH [DIP]=101: FRL12G_8K_HDR, 2.0CH
[DIP]=100: FRL12G_8K_HDR, 5.1CH [DIP]=011: FRL12G_8K_HDR, 7.1CH [DIP]=010:
FRL10G_8K_HDR, 2.0CH [DIP]=001: FRL10G_8K_HDR, 5.1CH [DIP]=000: FRL10G_8K_HDR,
7.1CH
5| SERVICE| Firmware update port.
6| IN port| HDMI signal input port, connecting to HDMI source device such as
DVD or PS5 with an HDMI cable.
7| OUT port (1~4)| HDMI signal output port, connecting to HDMI display device
such as TV or Monitor with an HDMI cable.
8| OPTICAL| Optical fiber audio output port.
9| L/R| Analog audio output port.
10| Power port| 5V/2A Power input port.
Auto Downscaling & Auto Converting
- This 8K HDMI splitter supports auto downscaling and auto converting on all outputs. It will automatically output the correct HDMI signal according to the EDID of the display device.
- As for this splitter, before downscaling it will compare all the EDIDs of the connected display devices and select the minimum resolution to downscale and output.
For example:
Note: If the source resolution is downscaled and converted to 1080P DVI according to the EDID of display devices, it will be output without sound on the TV.
Downscaling will not work in the following conditions:
- The input source is 8K DSC format.
- The resolution of input source is not supported by the splitter.
Application Example
- The terms HDMI and HDMI High-Definition Multimedia interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- www.infobitav.com
- info@infobitav.com
Documents / Resources
|
infobit 8K104 48Gbps 1x4 Splitter
iSwitch
[pdf] User Manual
8K104, 8K104 48Gbps 1x4 Splitter iSwitch, 48Gbps 1x4 Splitter iSwitch, 1x4
Splitter iSwitch, Splitter iSwitch, iSwitch
---|---