Mimaki CFX Series Announces Production Flatbed Cutters User Guide

: September 17, 2024
: Mimaki

Table of Contents

CFX Series Announces Production Flatbed Cutters
Specifications
Product Usage Instructions
Safety Precautions
Symbols
Warning Labels
- Product FAQ
Q: What should I do if any accessories are missing or
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

CFX Series Announces Production Flatbed Cutters

“`html

Specifications

Manufacturer: MIMAKI ENGINEERING CO., LTD.
Model: CFX Series flatbed cutting plotter
Information Technology Equipment Class: VCCI Class A

Product Usage Instructions

Safety Precautions

Before using the CFX Series flatbed cutting plotter, it is
crucial to understand and follow the safety precautions provided in
the manual. These precautions are in place to ensure the safe
operation of the machine and to prevent any accidents or
injuries.

Symbols

The manual includes various symbols that indicate different
precautions. Familiarize yourself with these symbols to ensure safe
and correct usage of the machine.

Warning Labels

Pay close attention to warning labels on the machine. These
labels highlight specific areas of caution and must be adhered to
at all times during operation.

Product FAQ

Q: What should I do if any accessories are missing or

damaged?

A: In case of missing or damaged accessories, please contact
your dealer or the sales office of the manufacturer for
assistance.

“`

Safety Precautions
CAUTION……………………………………………………………….. 2
DISCLAIMERS …………………………………………………………… 2 TV and Radio Interference …………………………………………. 2 Usage Restrictions ……………………………………………………. 2
Introduction …………………………………………………………… 5
About This Operation Manual ……………………………………. 5 Accessories ……………………………………………………………… 5
Safety Precautions…………………………………………………. 6
Symbols …………………………………………………………………… 6
Warning Labels ……………………………………………………… 9
MIMAKI ENGINEERING CO., LTD.
D203689-11

CAU T I ON
DISCLAIMERS
· MIMAKI ENGINEERING REJECTS ALL LIABILITY FOR DAMAGE ARISING DIRECTLY OR INDIRECTLY FROM THE USE OF THE CFX (“THIS MACHINE” HEREINAFTER), WHETHER OR NOT THE PRODUCT IS FAULTY.
· MIMAKI ENGINEERING REJECTS ALL LIABILITY FOR DAMAGE, DIRECT OR INDIRECT, TO MATERIALS CREATED WHILE USING THIS MACHINE.
· USING THIS MACHINE IN CONJUNCTION WITH DEVICES OTHER THAN THOSE RECOMMENDED BY MIMAKI ENGINEERING MAY RESULT IN FIRE OR ACCIDENTS. SUCH INCIDENTS ARE NOT COVERED BY THE PRODUCT WARRANTY. MIMAKI ENGINEERING REJECTS ALL LIABILITY FOR DAMAGE, DIRECT OR INDIRECT, ARISING FROM SUCH INCIDENTS.
· USE ONLY GENUINE MIMAKI ENGINEERING TOOLS AND PARTS. USE OF OTHER PRODUCTS MAY RESULT IN FAILURES OR REDUCE CUT QUALITY. SUCH INCIDENTS ARE NOT COVERED BY THE PRODUCT WARRANTY. MIMAKI ENGINEERING REJECTS ALL LIABILITY FOR DAMAGE, DIRECT OR INDIRECT, ARISING FROM SUCH INCIDENTS.
TV and Radio Interference
In use, the machine emits high-frequency electromagnetic radiation. If installed or used incorrectly, this may result in TV or radio interference. Accordingly, there is no assurance that the machine will not affect special radio or TV equipment. If you believe the machine is interfering with radio/TV reception, turn it off to investigate. If the interference disappears when the power is turned off, the machine is likely to be the cause of the interference. Try any of the following solutions or combinations of these solutions:
· Change the orientation of the TV or radio antenna to find a position where interference does not occur. · Place TVs or radios away from the product. · Plug TVs or radios into outlets on a different power supply path than the product.
Usage Restrictions
Usage Restrictions
The machine can be dangerous due to parts that move at high speeds and parts with high temperature. This machine is to be used only by those having complete understanding of dangers associated with these parts.
User Restrictions
Users of the machine must be properly trained. Restrict the operation of the machine to properly trained users.
Area Restrictions
· Only adequately trained and versed individuals are allowed to come closer to the equipment. Set area restrictions within the range shown in the following figure. As for the method of area restriction, the machine should be installed in a dedicated room or enclosed for everyone to understand that it is a hazardous area.
· Follow EN ISO13857 standards when securing the area with safety fence. · When installing the setup in a dedicated room, install locks and interlocks on the door of the room, and lastly
conduct risk assessment at the installation site before use.
Voluntary restraint of electromagnetic interference
Only adequately trained and versed individuals are allowed to come closer to the equipment. Set area restrictions within the range shown in the following figure. This product is VCCI Class A information technology equipment. Use of the machine in a residential environment may cause interference. Such incidents may require the user to take appropriate measures.VCCI-A
2

CFX-2513

1000 mm or more

CFX-2531

1000 mm or more

1000 mm or more 6050 mm or more

1000 mm or more

1000 mm or more 6050 mm or more

1000 mm or more

6050 mm or more

4150 mm or more

1 2 3 4 5 6
3

7950 mm or more

CFX-2550

1000 mm or more

1000 mm or more 6050 mm or more

1000 mm or more

4

Introduction

Thank you for purchasing a CFX Series flatbed cutting plotter.
This manual describes the CFX Series.
Read this manual carefully and make sure you understand it before use. Keep the manual in a convenient place for reference as needed.

About This Operation Manual

· This manual describes the operation, maintenance, and other handling of CFX Series flatbed cutting

plotters (“the machine”).

· Read this manual carefully and make sure you understand it before use. Keep the manual in a convenient

place for reference as needed.

· Ensure that the manual reaches the person using the machine. · Although every effort has been made to ensure the accuracy of the information in this manual, if you find

1

any issues, contact our service office.

· This manual is subject to change without notice for improvement.

· You can also download the latest manual from our website.

· The machine uses sharp blades. It can be very hazardous during operation. Never put your hands or head near the machine head. There is a risk of injury.

2

Unit abbreviations

The following abbreviations may appear in titles and elsewhere in the manual.

No.

Abbreviation

Name

3

(1) TUT-15

Tangential unit

(2) TUT-30

High-pressure tangential unit

(3) R10

Router unit

Accessories

4

Confirm that all accessories have been included. ( P.8-3)

If any accessories are missing or damaged, contact a dealer or our sales office.

5

6
5

Safety Precautions

Symbols
In this manual, symbols indicate and explain precautions. The indicated symbol varies depending on the nature of the precaution. Make sure you understand the meaning of each symbol and use the machine safely and correctly.
Examples of symbols
Explanation
Failure to observe the instructions given with the [Warning] symbol may result in death or serious injuries to personnel. Be sure to read the precaution carefully and use the machine correctly.
Failure to observe the instructions given with the [Caution] symbol may result in injury to personnel or damage to property.
Important notes regarding use of the machine are given with the [Important] symbol. Use as reference information.
Useful information is given with the [Tip] symbol. Use as reference information.

Indicates the corresponding page for related information.

The

symbol indicates precautions (including danger and warning items) that must be

followed. Specific precautions are shown in the figure, as in the warning of electric shock shown

at left.

The symbol indicates prohibited actions. Specifically prohibited actions are shown in or near the figure, as in the prohibition of disassembly shown at left.

The symbol indicates actions that must be taken or instructions that must be followed. Specific instruction are shown in the figure, as in holding cords by the plug when unplugging them, shown at left.

6

Warning

Do not disassemble or modify
· Never disassemble or modify plotter main unit or vacuum unit. Disassembling or modifying will result either in electric shock or malfunction of this machine.

Handling of cables
· Do not attempt to modify power or communication cables, and avoid damaging or breaking them. Placing heavy objects on, heating, or pulling the cable may damage it, which may result in fire or electric shock.

Do not use in humid environments

Handling of tools

· Do not use in humid environments, and do not

· Store cutter holders and blades out of the

splash water on the equipment.

reach of children. Do not place cutter holders

Failure to observe these instructions may result

or blades on the tray by the operating panel.

in fire, electric shock, or failure. When a problem occurs

Power supply and voltage

1

· Use of the machine under an abnormal condition, as when it is emitting smoke or fumes, may result in fire or electric shock. Turn off the power switch immediately, and then be sure to unplug the machine from the outlet. Once you have confirmed that smoke is no longer being emitted, request repair from your dealer or service office. Never attempt to repair the machine yourself, which is hazardous.
Entrust maintenance to service engineers
· In the event of failure, entrust maintenance work to service engineers. Never perform maintenance work by yourself, which poses risks including electric shock.
Handling of the power cable
· Use the power cable provided. · Do not attempt to modify the cable, and avoid
damaging or breaking it. Placing heavy objects on, heating, or pulling the cable may damage it, which may result in fire or electric shock.

· The machine contains parts that generate high voltage. Electrical work by individuals other than licensed electricians is prohibited.

· To prevent electric shocks during maintenance,

always turn the main power switch off, and

remove the power plug. Capacitors of some

units may take one minute to discharge. Before maintenance, always wait 3 minutes after turning off the main power supply switch and

2

disconnecting the power inlet.

· Always ground the machine to prevent electric

shock, because there is significant leakage

current.

· Use a power supply that meets the power

supply specifications. Always plug the power

cable into a grounded socket. Failure to

observe these instructions may result in fire or electric shock.

3

· The task of turning on the main power supply switch of the machine should be performed only by personnel who are thoroughly familiarity with using the machine.

Preventive measures against dust

Grounding work

· When handling dust-producing substance that pose health hazards, wear a mask or take other protective measures.

· The machine must be grounded to protect

against electric shock. · Ground in accordance with Class C grounding

4

work, formerly Type 3 grounding work.

Handling of grease

· If grease enters a user’s eyes, wash with clean water for 15 minutes and seek medical attention.

· If grease gets on skin or clothing, wipe it off well and wash thoroughly with water and soap.

· If you feel ill after inhaling a large amount of vapor, go to a place with fresh air, rest under a blanket or the like

to stay warm, and seek medical attention.

· If grease is accidentally ingested, seek medical attention immediately without inducing vomiting. · In case of fire involving grease, initially use extinguishing agents such as powder, carbon dioxide, or dry
sand. For large fires, use foam extinguishers to block out air around the fire. Evacuate people not involved in

5

firefighting to a safe place.

· Do not use water to extinguish grease fires, because this is hazardous and may cause the fire to spread.

· Wear protective equipment when fighting fires. Fight fires from upwind.

Safety measures

Take the following safety measures when working with flammable materials.

· Before working with these materials, make sure that wood chips or other remains are removed.

· Do not leave the machine unattended while it is in use. · Keep a fire extinguisher nearby.

6

· Keep flammable materials away from the machine.

7

Warning
Machine disposal · Request an industrial waste disposal company to dispose of the machine. · Dispose of in accordance with local regulations.
Other usage precautions · Keep children away from this machine.

For safe operation

Caution

Do not place heavy objects on cables
· Do not use force to bend the power or communication cable, and do not place heavy objects on them. Failure to observe these instructions may break the cables, cause electric shock, generate heat, or cause fires.
Do not sit on the main unit
· Do not sit on the main unit. This may lead to failure.
Do not work while wearing baggy clothing or jewelry
· Do not wear baggy clothes or fashion accessories while working. Keep long hair bound.

Wait 30 seconds before restoring power
· Wait 30 seconds before turning the machine on again after it is turned off. Failure to observe these instructions may result in malfunctioning.
Keep your face away from the cutting panel during use
· Keep your face and hands away from the cutting panel during cutting or drawing. Failure to observe this precaution poses a risk of injury from the cutter.
Contact Mimaki before moving the plotter to another location
· Plotters are precision instruments. Contact Mimaki in advance if you will move the plotter to another location.

For safe installation

Caution

Exposed to direct sunlight · Do not install where direct sunlight or the like will cause the cutting panel surface temperature to exceed 60°C. Failure to observe this precaution may result in deformation of the cutting panel or failure.
Exposed to significant changes in temperature or humidity · Use the machine under the following environmental conditions: · Operating environment: 10° to 35°C, 35% to 75% (RH)
Exposed to direct air flow from an air conditioner or similar location
· Cutting quality may be adversely affected.
Places with uneven surfaces · Normal results cannot be obtained unless the plotter is level. Failure to observe these instructions may also result in failure.

Where vibration occurs · Normal results cannot be obtained where vibration occurs.
Dusty, dirty, or smoky environments · Plotters are precision instruments. Do not use in areas filled with dust or dirt.
Near flammable materials
· Do not place flammable materials near the vacuum or in front of the exhaust area, because exhaust air becomes very hot when the vacuum is used.
Places with open flame · Do not place vases, pot plants, cups, cosmetics, containers of chemicals or water, or small metal objects on top of this machine. There is a risk of failure, electric shock, or fire if liquids or items drop inside the machine.

8

Warning Labels

Warning labels have been applied to the machine. Make sure you fully understand the details indicated on the various warning labels. If a warning label is illegible due to stains or has come off, purchase a new one from a dealer or our service office.

1

34$

2

3

“7&35*44&.&/5

4

5

6
9

Optional accessories

Tangential unit (TUT-15)

High-pressure tangential
unit (TUT-30)

Router unitR10