OAKCASTLE PS200 Party Speaker User Manual

OAKCASTLE PS200 Party Speaker

Specifications

• Model: Oakcastle PS200
• Playback Time: Up to 5 hours
• Microphone: Wired
• TF Card Capacity: Up to 32GB
• Supported Audio Formats: MP3, WAV

Product Usage Instructions

1. Getting Started
   Remove the packaging and prepare your Oakcastle PS200 party speaker for use.

2. Powering On/Off:
   Slide the ‘Switch’ button located at the back of the speaker to the left or right to power on or off your party speaker.

3. Using the Microphone:
   Insert the included wired microphone into the ‘MIC’ port at the back of the unit. The microphone can be used in all modes: Bluetooth, TF Card, USB, or FM Radio.

4. Party LED Lighting:
   To change the lighting modes, press and hold the ‘Mode/Lighting’ button for 2-3 seconds. There are four lighting modes available which can be used in all modes.

FAQ
Q: What should I do if there is no power or function?
A: Check the switch button on the back of the speaker and ensure it is set to ‘ON’. Also, make sure the speaker battery is fully charged.

What’s in the Box?

• A. The Oakcastle PS200 Party Speaker
• B. Wired Microphone
• C. USB Type-C Charging Cable
• D. User Manual

Front & Top View

1. Mode/Lighting

2. Previous

3. Play/Pause/TWS

4. Next

5. EQ

6. Volume +/-
   Back View

7. Charging LED light

8. Microphone Port

9. Switch ON/OFF

10. TF Card Playback Port

11. USB Type-C Charging Port (DC5V)

12. USB Playback Port

Basic Information

Please note that the instructions within this user manual will refer to the button  number on the speaker (Ref ‘number’), in accordance with the diagrams from pages

Basic Information​
Remove the packaging and prepare your Oakcastle PS200 party speaker for use.

• Charging Time
  Insert the USB Type-C cable at the back of the unit (Ref.11), and then connect with a plug (DC5V) to the mains for charging. The charging LED display with light up red to indicate charging (Ref.7). It takes up to 8 hours to process a full charge course of the speaker. Once fully charged the red LED light will switch off. Disconnect the party speaker from mains and take advantage of its portability.​

• Please Note: It would be recommended to process a full charge course when not in  use for longer battery life.​

• Playtime
  The Oakcastle PS200 has an internal rechargeable battery. Once fully charged, the speaker can be used on battery power for up to 5 hours.
  Please Note: The playtime may vary based on the volume level and lighting modes usage while playing on battery power.

• Microphone
  Insert the wired microphone included in the box into ‘MIC’ port (Ref.8) at the back of the unit. The microphone can be used in all modes: Bluetooth, TF Crad, USB or FM Radio.

• Power ON/OFF
  Slide the ‘Switch’ button (Ref.9) to left or to the right to power on/off your party speaker.

• Party LED lightening:
  Press and hold the ‘Mode/Lightning’ button (Ref.1) for 2-3 seconds to change the lights mode. There are four lighting modes available to choose from which can be used in all modes: BT, FM Radio, USB or SD.

• Control Buttons Functionality

• ‘Mode/Lighting’ Button (Ref.1)
  Press this button repeatedly to change the Party Speaker modes: Bluetooth, TF Card,

• USB or FM Radio.
  Press and hold this button for 2-3 seconds to change the party speaker lighting modes.

• ‘Previous’ button (Ref.2)
  Press to skip and play the previous audio track in Bluetooth, TF Card or USB Playback Mode.
  Press this button in ‘FM Radio’ Mode to play the previous FM radio station listened to.

Play/Pause/TWS button (Ref.3)

• Press to play or pause music .
• Press and hold for 2-3 seconds to process an automatic radio stations scan while in FM Mode.
• The ‘TWS’ function can only be used when using two Oakcastle PS200 Party Speakers which you can connect and use as two Bluetooth Party Speakers.
• Please Note: Each package only contains one Oakcastle PS200.
• To connect two Oakcastle PS200’s, ensure that both speakers are powered on and not paired individually with other devices via Bluetooth. Press the ‘TWS’ button (Ref.3) twice on one of these speakers and both will connect wirelessly with each other. A voice prompted message will then be heard. Once both Oakcastle PS200
• Party Speakers are connected, switch on Bluetooth on your phone then search for
• ‘Oakcastle PS200’. Select and pair with the speakers. You can now play audio on both party speakers. To disconnect press the ‘TWS’ button (Ref.3) again on one of the speakers.

Next button (Ref.4)
Press to skip and play the next audio track while in Bluetooth, TF card or USB

• Playback Mode.
  Press to play the next radio station while in FM Radio Mode.

• EQ button (Ref.5)
  Press the EQ button to toggle in between equalisers sound modes for more bass or treble as per your preferences. There are 6 equalisers modes in total.

• Volume Rotary Knob (Ref.6)
  Control the volume level -/+ by rotating the ‘Volume’ knob to the left or right.

Bluetooth, TF (Micro SD) & USB Playback Mode

Bluetooth Mode

• The Oakcastle PS200 can be paired via Bluetooth with a phone or a tablet to play audio from via your party speaker.
• Press the ‘MODE’ button at the top of the speaker (Ref.1) repeatedly to change the speaker mode to Bluetooth. A voice message will sound the speaker mode.
• Once in Bluetooth Mode, the speaker is ready to pair. Activate Bluetooth on your device, and search on your list for ‘Oakcastle PS200’. Select the speaker to pair with your device.
• Once connected, you can start playing audio from your device via your party speaker.
• Please Note: The Oakcastle PS200 cannot be paired with Bluetooth earbuds or earphones.

USB Playback Mode

• Press the ‘Mode’ button (Ref.1) repeatedly to change to USB Mode. A voice message will sound to confirm the mode.
• The USB stick should be of up to 32GB and must be formatted in FAT32 before adding on your stick the audio files in supported formats MP3 or WAV.
• Insert the USB stick into the USB playback port (Ref.12) and the Oakcastle P200 will automatically start playing audio from your USB.
• Please note: The Oakcastle PS200 USB port cannot be used as a connection port with other devices as this is just for playback.

TF Playback Mode

• Press the ‘MODE’ button (Ref.1) at the top of the unit repeatedly to change the speaker mode to TF. A voice message will sound to confirm this mode.
• The TF Card should be of up to 32GB, which must be formatted before adding audio files in supported formats MP3 or WAV.
• Insert the TF card into its port (Ref.10) at the back of the speaker.
• The Oakcastle PS200 will then start playing audio from your TF card.

FM Radio

FM Radio​ Mode

• Press the ‘MODE’ button (Ref.1) at the top of the unit repeatedly to change the speaker mode to FM Radio. A voice message will sound to confirm this mode.
• Press and hold the ‘Play/Pause/TWS’ Button (Ref.3) for 2-3 seconds to start processing an automatic scan for the FM radio stations available at your location.
• Once the search has been completed, the Oakcastle PS200, will automatically save all FM radio stations available at your location. The party speaker will then start playing the first radio station found.
• Press the ‘PREVIOUS’ (Ref.2) or ‘NEXT’ (Ref.4) buttons to play the next/previously stored FM radio station.

Troubleshooting

speaker and make sure is set to ‘ON’.

Ensure the speaker battery is fully charged.

No Sound| Increase the volume using the rotary knob on the speaker. If you are paired via Bluetooth with another device and there is no sound, increase the volume level from your device, then the increase volume on the speaker.
Bluetooth not connecting| Ensure the Oakcastle PS200 is not paired with other devices and is set to Bluetooth Mode.

Ensure your device has Bluetooth activated and search for the ‘Oakcastle PS200’ select and connect. You will now play audio via your party speaker.

Support
If you require assistance with your new Oakcastle PS200, please contact our Tech Support team by completing the form on the Oakcastle website: www.oakcastle.co.uk/support

Specification & Warranty

Specification

Warranty

All products come with a standard 12-month warranty. All items must be registered within 30 days of purchase on www.oakcastle.co.uk for the warranty to be valid. Once on our website, use the menu to find ‘Register Your Product’. You will also be given the chance to extend your warranty for an additional 24 months, free of charge.

Safety Information

1. Read these instructions.
2. Keep these instructions. Instructions are also available for download at www.majority.co.uk.
3. Heed all warnings.
4. Follow all instructions.
5. Do no clean the apparatus near or with water.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use accessories specified by the manufacturer.
11. Unplug this apparatus during light storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel.
    No naked flame sources, such as a lit candle should be placed on the apparatus. Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS

The apparatus shall not be exposed to dripping, splashing or objects filled with water.
The main plug is used to disconnect the device. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat.

RECYCLING ELECTRICAL  PRODUCTS
You should now recycle your waste electrical goods and in doing so help the environment.

This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a  suitable facility for disposal when finished.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.

Risk of electric shock.
Do not open.
Read all instructions carefully before use and keep for future reference.
When servicing, use only identical replacement parts.

IMPORTANT: Please read all instructions carefully before use and keep for future reference

References

• Majority – Home Audio | DAB & Internet Radios | Soundbars
• Oakcastle | Now in over 3 Million Homes
• Support - Oakcastle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>