WILLIAMS HH-R – 600 Series Horizontal Fan Coils Instruction Manual
- September 16, 2024
- williams
Table of Contents
WILLIAMS HH-R – 600 Series Horizontal Fan Coils
Product Specifications
- Model: HH Series
- Type: High-Performance Horizontal Fan Coil with Rear Return Air Plenum
- Cooling Capacity: 600 – 2,200 CFM
Product Usage Instructions
Installation
- Ensure the unit is placed horizontally with the rear return air plenum properly positioned.
- Connect the unit to the appropriate power source as per electrical requirements.
- Install the specified filter size according to the model selected.
Operation
- Turn on the unit using the designated power switch.
- Set the desired cooling capacity based on your requirements.
- Monitor the unit for any unusual noises or performance issues.
Maintenance
- Regularly clean or replace the air filter as recommended by the manufacturer.
- Schedule professional maintenance checks at least once a year to ensure optimal performance.
DIMENSION
HORIZONTAL WITH REAR RETURN AIR PLENUM
HH-R / 600 – 1,200 CFM
- All sizes shown in inches.
- Right hand unit shown, left hand unit opposite.
- Coil connections determined by facing the supply air opening.
- Electrical junction box is located on the same side as the coil connections.
- Unit must be installed level and condensate drain lines should be trapped.
- Drain pan is powder coated epoxy with a 1/8″ thick closed cell insulation and has 3/4″ NPT primary and secondary drain connections.
- Entire cabinet, scroll and blower wheel are heavy gauge, galvanized steel.
- Coil connections: 1/2″ CW on HH006, 3/4″ on HH008-012 and 1/2″ HW on HH006-012
HORIZONTAL WITH REAR RETURN AIR PLENUM
HH-R / 1,500 – 2,200 CFM
- All sizes shown in inches.
- Right hand unit shown, left hand unit opposite.
- Coil connections determined by facing the supply air opening.
- Electrical junction box is located on the same side as the coil connections.
- Unit must be installed level and condensate drain lines should be trapped.
- Drain pan is powder coated epoxy with a 1/8″ thick closed cell insulation and has 3/4″ NPT primary and secondary drain connections.
- Entire cabinet, scroll and blower wheel are heavy-gauge, galvanized steel.
- Coil connections: 3/4″ CW on HH015-022 and 1/2″ HW on HH015-022
WILLIAMS HORIZONTAL FAN COILS 41
Frequently Asked Questions
- Q: What should I do if the unit is making unusual noises?
- A: Check if the unit is properly installed and if any components are loose. If the issue persists, contact customer support for assistance.
- Q: How often should I replace the air filter?
- A: It is recommended to replace the air filter every 1-3 months depending on usage and environmental conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>