WILLIAMS SONOMA TG66P4368L03 Classic Fraser Fir-6.5-LED Clear Instruction Manual
- October 30, 2023
- WILLIAMS SONOMA
Table of Contents
WILLIAMS SONOMA TG66P4368L03 Classic Fraser Fir-6.5-LED Clear Instruction
Manual
LIGHT ASSEMBLY DIAGRAM
12.6 Watts
Thank you for purchasing your Christmas tree. The instructions below will help you quickly and easily set up your new tree.
- Find a level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.
2. Each tree section is numbered with a tag. Identify all sections before
assembling.
3. Assemble the tree from the bottom to the top. Insert the pole of Section 1
into the assembled stand. Make sure the pole is firmly inserted and secured
into the stand.
Note: Do not step on the tree legs during the setup. This may deform the tree
stand and may result in an unbalanced tree.
4. Follow the direction of the arrow marked on the adapter to insert. Ensure
that all poles are firmly secure. Continue this step until the entire tree is
set up. Be sure that all wires are free of branch hinges.
5. Plug the adapter into the wall outlet (See Fig. B). Your tree should now
be lit. If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose or missing bulbs. Connect the plugs or replace the bad
bulbs promptly in order to maintain the performance and life expectancy of
your pre-lit tree.
6. Begin to shape the branches and tips in the bottom section inserted into
the tree stand. Start with the tips closest to the middle of the tree; pull
the individual tips alternately upward and outward working your way to the tip
of the branches (See Fig. C). Work row by row to the upper part of the tree
section leaving no tip untouched. Continue to shape each branch as described
above as you set up each tree section.
STORAGE INSTRUCTIONS
- Unplug cord from the wall outlet first and then remove all ornaments and decorations.
- Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.
- Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the bottom section is removed from the tree stand.
- Carefully place all tree sections into shipping box and tape it shut.
- When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree.
TROUBLESHOOTING TIPS
For pre-lit trees, if the tree does not illuminate:
- Check to make sure that all plugs and adapter are properly connected as indicated in Fig. B. (If the tree comes with a foot pedal, try stepping on the on/off button).
- Turn the poles gently to make sure pole-to-pole connection is secured.
- Check for loose, broken or missing bulbs, and replace as needed.
Loose Branches
- Extra hinge pins are included for repairing the hinges of the branches. Place the branch into the slot of the bracket.
- Insert a new hinge pin through the hole and secure using the retainer washer. (See Fig. D)
SPARE PARTS
This tree includes spare hinge pins, washers and bulbs.
CAUTION
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a
different adapter will damage the lights and may cause fire, or electrical
shock hazards.
b) Do not install on trees having needles, leaves or branch coverings of metal
or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire
insulation.
Read More About This Manual & Download PDF: