ALS BWL-30 LED Recessed Luminaire Instruction Manual
- September 16, 2024
- ALS
Table of Contents
- BWL-30 LED Recessed Luminaire
- Specifications
- Product Usage Instructions
- Safety Instructions:
- Cleaning Instructions:
- LED Light Source Replacement:
- Disposal Instructions:
- Q: Can I dim the LED luminaire?
- Q: What should I do if the LED light source needs
- Q: Where should I dispose of the product at the end of its
BWL-30 LED Recessed Luminaire
“`html
Specifications
- LED recessed luminaire
- Body in die-cast aluminium, powder coated
- Splay springs
- Reflector in aluminium
- Including remote power supply
- Not dimmable
- Protection class: II
- Protection class: IP20
- Installation site: interior
- Available in various color temperatures and wattages
Product Usage Instructions
Safety Instructions:
-
The product is only for use in interiors.
-
Do not dispose of the product in household garbage.
-
Avoid looking directly into the LED light to prevent eye
damage. -
Installation should be done only by qualified and authorized
persons.
Cleaning Instructions:
Do not cover the luminaire with insulating material. Clean the
luminaire with a soft, dry cloth to avoid damage.
LED Light Source Replacement:
The light source is replaceable by a professional. Do not
attempt to replace it yourself.
Disposal Instructions:
Dispose of the packaging in local recycling containers. When the
product reaches the end of its lifecycle, take it to a disposal
center instead of household garbage.
FAQ
Q: Can I dim the LED luminaire?
A: No, the LED luminaire is not dimmable.
Q: What should I do if the LED light source needs
replacement?
A: Contact a professional to replace the light source. Do not
attempt to do it yourself.
Q: Where should I dispose of the product at the end of its
lifecycle?
A: Take the product to a disposal center as it should not be
disposed of in household garbage. Local officials can provide
information on collection offices.
“`
DESCRIPTION OF PARTS
LED recessed luminaire, Body in die-cast aluminium, powder coated, Splay springs, Re ector in aluminium, incl. remote power supply
TECHNICAL DATA
Dimensions
Ø 160, H135 mm | Ceiling cutout: Ø 150 mm Swivelling: 45° | Rotatable 355°
Not dimmable | Protection class: II | Protection class: IP20 | installation site: interior
White
4000K BWL-30NW1 3500K BWL-30WNW1 3000K BWL-30WW1 2700K BWL-30SW1
White/black
Black
27W / 220-240V / AC750mA
BWL-30NW1-2 BWL-30NW2
BWL-30WNW1-2 BWL-30WNW2
BWL-30WW1-2 BWL-30WW2
BWL-30SW1-2
BWL-30SW2
Black/white
BWL-30NW2-1
30°
BWL-30WNW2-1 30°
BWL-30WW2-1 30°
BWL-30SW2-1
30°
4000K BWL-30NW1F
BWL-30NW1-2F
BWL-30NW2F BWL-30NW2-1F
60°
3500K BWL-30WNW1F BWL-30WNW1-2F BWL-30WNW2F BWL-30WNW2-1F 60°
3000K BWL-30WW1F BWL-30WW1-2F BWL-30WW2F BWL-30WW2-1F 60°
2700K BWL-30SW1F BWL-30SW1-2F BWL-30SW2F BWL-30SW2-1F 60°
41W / 220-240V / AC1050mA
4000K BWL-40NW1
BWL-40NW1-2 BWL-40NW2
BWL-40NW2-1
30°
3500K BWL-40WNW1 BWL-40WNW1-2 BWL-40WNW2 BWL-40WNW2-1 30°
3000K BWL-40WW1
BWL-40WW1-2 BWL-40WW2
BWL-40WW2-1
30°
2700K BWL-40SW1
BWL-40SW1-2
BWL-40SW2
BWL-40SW2-1
30°
4000K BWL-40NW1F BWL-40NW1-2F BWL-40NW2F BWL-40NW2-1F 60° 3500K BWL-40WNW1F BWL-40WNW1-2F BWL-40WNW2F BWL-40WNW2-1F 60° 3000K BWL-40WW1F BWL-40WW1-2F BWL- 40WW2F BWL-40WW2-1F 60° 2700K BWL-40SW1F BWL-40SW1-2F BWL-40SW2F BWL-40SW2-1F 60°
CCT
Lichtquelle: Bridgelux COB Eprel-Nr.
Lichtquelle: Bridgelux COB Eprel-No
4000K 27W BXRE-40G20F0-C-83 1115635 41W BXRE-40G65F0-D-83 1181986
3500K 27W BXRE-35G20F0-C-83 1115634 41W BXRE-35G65F0-D-83 1181983
3000K 27W BXRE-30G20F0-C-83 1024000 41W BXRE-30G65F0-D-83 1181978
2700K 27W BXRE-27G20F0-C-83 1115627 41W BXRE-27G65F0-D-83 1181975
This luminaires contains one light source of energy efficiency class E
The product
consists of
two components. Lumi-
LED
LED
naire with
light source
and internal The light source is only exchange-
power supply. able by a professional.
LED 230V
The LED driver is only exchangeable by a professional.
Protection class II
Notification of Risks
LED luminaire is not dimmable
CE label
Safety Instructions
The product is only for use in interiors.
The product may not be disposed of in the household garbage.
Don’t look directly into the LED! The LED is that bright that it might damage
your eyes!
Cleaning Instructions
Do not cover the luminaire with insulating material
Installation only by qualified and authorised persons
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT. KEEP THE SAFETY AND OPERATING
INSTRUCTIONS FOR FUTURE USE.
The warranty claim and guarantee is rendered invalid in the event of damage to
the product, which is caused by not following the operating instructions. We
are not liable for the consequent damage. Because of specific characteristics
of LED`s (life, deviation in colour etc.) we formulated special terms for
planing and installing our LED products.They are part of these installation
manual! Should they not be available, request them please!
SAFETY INFORMATION
· The light is suitable for lighting purpose indoors. · The LED light is
provided for load-bearing and suspended ceiling
with ceiling cut-out according to data sheet. Sizes see technical data. · Do
not attach any additional loads such as decorations and / or signs to the
luminaire!
· Don’t install under power. · Follow the instruction manual for installation.
· Installation only by qualified and authorised persons. · Do not use the
product when it has been damaged (defective
covers) or there are operational faults such as ickering, smoking, steaming,
crackling noises or the smell of smoke. · A damaged or defective product must
be changed or repaired by the manufacturer, a service person or a comparable
qualified person. · Installation only under observance of the valid guidelines
specific to application and country among others VDE 0.100. · Never open one
of the electrical operating agents or plug any objects into them. Such
procedures signify a danger to life through electrical shock. · Absolutely
avoid contact between the product and water or other liquids. For reasons of
electrical safety, the light may not be placed in contact with water or other
liquids or submerged in water. · The product may not be changed or modified. ·
Don’t look directly into the LED! The LED is that bright that it might damage
your eyes! · The luminaire must not be exposed to high levels of dust.
MAINTENANCE AND CLEANING
The light source is only exchangeable by a professional.
· Do not use solvents, such as benzene and similar agents.The light would be
damaged thereby.
· Only use a dry, lint-free cloth for cleaning the product.
DISPOSAL
The packaging consists of environmentally friendly materials. Dispose of them
in the local recycling containers.
Do not dispose of this product in the household garbage when it has reached
the end of its lifecycle, but rather take it to a disposal center. Your local
officials will provide you with information about collection offices and their
business hours.
BWL
LED recessed luminaire
BWL-30 BWL-40
Weiß
Weiß/ schwarz
Schwarz
Schwarz/ weiß
INTENDED USAGE
This product will only serve the purpose of illumination.
SCOPE OF DELIVERY
LED recessed luminaire incl. remote power supply Set of instructions for
assembly, operation and safety
TECHNICAL CHANGES
Changes in the sense of technical progress can be made without prior notice.
address | contact
A.L.S. GmbH Mastorter Str. 31 | 88069 Tettnang (Germany) Tel.: +49 (0) 75 42
93 44-0 | Fax.: +49 (0) 75 42 93 44-30 E-Mail: info@als.de | Web: www.als.de
EN Version: 2024-08-05
01
02
03
04
150
/(”5,9
135
355° 45°
Ø 160
150 mm
/(”5,9(5
200 mm
200 mm
O FF
01 Switch off before installation. Switch on only after complete installation
and examination of the circuit. Professional electrician for installation and
maintenance only. Turn Off power supply before starting any installation. Read
instructions & check you have all the tools and accessories to complete the
installation correctly.
Ø 175
Accessories (not included)
Adapter ring for BWL with existing ceiling cutout Ø175 mm
White Art.-Nr. Z-RBWL1
Black Art.-Nr. Z-RBWL2
A
A
Ø 150 Ø 186
Fixing materials: The warranty is void if the buyer or a third party repairs or modifies the luminaire.
03 Installation only under observance of the valid guidelines specific to
application and country among others VDE 0.100.
Please note! The distance between the LED luminaire and the provided LED power
supply, and the distance between the LED luminaire to a wall must be more than
200 mm.
05
06
07
/(”5,9(5
ON
/(”5,9(5 ,1387
/(”5,9(5 ,1387
Technical note: The recessed luminaire should not exceed the ambient
temperature of 40° C! When using an installation box, ensure sufficient
convection.
Another installation / assembly / materials / types than provided in the
manual sheets, release us from any electrotechnical and electrostatic
responsibility.
07 After installation and connection, switch on the mains voltage all-pole.
Switch on the associated circuit breaker or turn the fuse on.
Avoid looking too long in the light exit near the light, they could damage
your eyes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>