ALS BWE-26WW LED Spotlight Installation Guide
- July 23, 2024
- ALS
Table of Contents
ALS BWE-26WW LED Spotlight
Specifications
- Article Numbers : BWE-26WW, BWE-26NW, BWE-26SW, BWE-26NWX1F, BWE-26WW1, BWE-26NW1, BWE-26SW1
- CE Marking : Yes
- Class : Class II (special insulation)
- Power : LED 26W 700mA
Product Information
LED products have specific characteristics such as lifespan and color deviation. Special terms have been formulated for planning and installing these LED products. Avoid looking directly into the LED to prevent eye damage. The spotlight should only be used in dry rooms. Note that printing errors may occur, and drawings and pictures are for reference only.
Installation Instructions
- Do not cover luminaires with heat-insulating cover sheets or similar materials.
- Ensure the spotlight is operated in dry rooms.
- Avoid looking directly into the LED light to prevent eye damage.
Technical Information
For technical support or further information, contact A.L.S. GmbH at the provided contact details.
- article-no : BWE-26WW1, BWE-26NW1, BWE-26SW1
- lamps: LED | 26 W
- powers: 700mA
Packaging Contents
- 1 x BWE LED
- 1 x BWE LED Manual
General instruction notices
- Don’t install under power.
- Follow the instruction manual for installation.
- Installation only by qualified and authorized persons.
- A damaged or defective product must be changed or repaired by the manufacturer, a service person, or a comparable qualified person.
- Installation only under observance of the valid guidelines specific to application and country among others VDE 0.100.
Because of the specific characteristics of LEDs (life, deviation in color, etc.), we formulated special terms for planing and installing our LED products.
- They are part of this installation manual!
- Should they not be available, request them please!
- Don’t look directly into the LED!
- The LED could damage your eyes!
- Spotlights must only be operated in dry rooms!
We are not responsible for printing errors and mistakes. Drawings and pictures are just sketches. Subjects to change without notice.
It is not allowed to cover luminaires with heat-insulating cover sheets or similar materials!
FAQ
Q: Can I use a heat-insulating cover sheet on the luminaires?
A: It is not allowed to cover luminaires with heat-insulating cover
sheets or similar materials to prevent overheating.
Q: What should I do if I encounter printing errors in the manual?
A: In case of any printing errors or missing information, please
contact the manufacturer for assistance.
Q: Is it safe to look directly into the LED light?
A: No, avoid looking directly into the LED light to prevent potential
eye damage.