ALS SLML-16SW LED Track Spotlight Installation Guide

ALS SLML-16SW LED Track Spotlight

FAQs

• Q: Can I replace the light source myself?
  • A: No, the light source should only be replaced by a professional to ensure the safety and proper functioning of the product.
• Q: What should I do with the product at the end of its lifecycle?
  • A: Do not dispose of the product in household garbage. Take it to a disposal center for proper handling.
• Q: Is the product dimmable?
  • A: No, the product is not dimmable.

DESCRIPTION OF PARTS

• LED track spotlight with adapter
• Luminaire housing: Aluminum die-cast, color: White or black

TECHNICAL DATA

• Indoors, the operation only in power track systems  (Global, Eutrac, Erco, Nokia)
• Protection class: II
• Protection class: IP20 | CRI>90 | Not dimmable
• Beam angle: SLML-12 = 20°, SLML-16 = 40°
• Connected load 12W, 220-250V, 50 Hz

Connected load 16W, 220-250V, 50 Hz

Diese Leuchten enthalten eine Lichtquelle der Energieeffizienzklasse F

Dimensions

• Luminaire height: 164 mm
• Luminaire head: Ø64 x H130 mm

The product consists of two components. Luminaire with a light source and internal power supply.

• The light source is only exchangeable by a professional.
• The LED driver is only exchangeable by a professional.
  • Protection class II
  • CE label
  • The product is only for use in interiors.
  • The product may not be disposed of in the household garbage.
  • Don’t look directly into the LED! The LED is that bright that it might damage your eyes!
  • Notification of Risks
  • Safety Instructions
  • Cleaning Instructions
  • LED luminaire gets very warm during operation. Be careful when touching the body.
  • Not dimmable

SAFETY

• READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT. KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE USE.
• The warranty claim and guarantee is rendered invalid in the event of damage to the product, which is caused by not following the operating instructions. We are not liable for the consequent damage.
• Because of specific characteristics of LED‘s (life, deviation in colour etc.) we formulated special terms for planing and installing our LED products.
• They are part of these installation manual! Should they not be available, request them please!

SAFETY INFORMATION

• The luminaire is suitable for indoor use only, in dry and closed rooms.
• Don’t install under power.
• Follow the instruction manual for installation.
• Installation only by qualified and authorised persons.
• Do not use the product when it has been damaged (defective covers) or there are operational faults such as flickering, smoking, steaming, crackling noises or the smell of smoke.
• A damaged or defective product must be changed or repaired by the manufacturer, a service person or a comparable qualified person.
• Installation only under observance of the valid guidelines specific to application and country among others VDE 0.100.
• Never open one of the electrical operating agents or plug any objects into them. Such procedures signify a danger to life through electrical shock.
• Absolutely avoid contact between the product and water or other liquids. For reasons of electrical safety, the light may not be placed in contact with water or other liquids or submerged in water.
• The product may not be changed or modified.
• In operation or after extended periods of operation, avoid touching the external surface of the LED luminaire, there is a danger of high temperatures that can cause burns.
• Don’t look directly into the LED! The LED is that bright that it might damage your eyes!
• The luminaire must not be exposed to high levels of dust.

MAINTENANCE AND CLEANING

• The light source is only exchangeable by a professional.
• Do not use solvents, such as benzene and similar agents. The light would be damaged thereby.
• Only use a dry, lint-free cloth for cleaning the product.

DISPOSAL

• The packaging consists of environmentally friendly materials.
• Dispose of them in the local recycling containers.
• Do not dispose of this product in the household garbage when it has reached the end of its lifecycle, but rather take it to a disposal center. Your local officials will provide you with information about collection offices and their business hours.

MORE INFO

LED track spot light

• SLML-12NWxx
• SLML-12WNWxx
• SLML-12WWxx
• SLML-12SWxx
• SLML-16NWxx
• SLML-16WNWxx
• SLML-16WWxx
• SLML-16SWxx

INTENDED USAGE

• This product will only serve the purpose of illumination.

SCOPE OF DELIVERY

• LED track spotlight with adapter Set of instructions for assembly, operation and safety

TECHNICAL CHANGES

• Changes in the sense of technical progress can be made without prior notice.

MOUNTING INSTRUCTION

1. Switch off before installation. Switch on only after complete installation and examination of the circuit. Professional electrician for installation and maintenance only. Turn Off power supply before starting any installation. Read instructions & check you have all the tools and accessories to complete the installation correctly.
2. Check the adapter before inserting it, if all plastic locks and contacts are flush in the adapter! All interlocks and switching positions must be in zero position! Failure to do so will destroy the adapter and must not be used any more!
   • Fixing materials: The warranty is void if the buyer or a third party repairs or modifies the luminaire.
   • Attention! Adapter can only be installed in 3phase track in one direction. Locking mechanism must be placed on track side like marked with A.
3. 03a Place the luminaire in the correct position with the track adapter.
   • 03b Lock the retaining latch 1.
4. Set phase with side phase selection dial (2) for commissioning the luminaire with the contact selection switch 1/2/3. Another installation / assembly / materials / types than provided in the manual sheets, release us from any electrotechnical and electrostatic responsibility.
5. 06a After installation and connection, switch on the mains voltage all-pole. Switch on the associated circuit breaker or turn the fuse on.
   • Avoid looking too long in the light exit near the light, they could damage your eyes.
   • Remove the spotlight
   • Disconnect the mains voltage from all poles before disassembly.
6. 06a When removing, first set the phase wheel to zero
   • 06b Release the lock and hold the spotlight with one hand!

CONTACT INFORMATION

• A.L.S. GmbH
• Mastorter Str. 31 | 88069 Tettnang (Germany)
• Tel.: +49 (0) 75 42 93 44-0
• Fax.: +49 (0) 75 42 93 44-30
• E-Mail: info@als.de
• Web: www.als.de

References

• A.L.S. Architektonische Lichtsysteme

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>