ALS TFP-80xW1xS LED Flat Panel Instruction Manual
- June 1, 2024
- ALS
Table of Contents
ALS TFP-80xW1xS LED Flat Panel
Black x = 2
White x = 1
TECHNICAL NOTE
Luminaires which are divided on 3 phases and operated in higher number have an accordingly high inrush current! To protect switching actuators KNX etc., we recommend using current limiters or auxiliary relays on site. See technical data.
INTENDED USAGE
This product will only serve the purpose of illumination.
SCOPE OF DELIVERY
LED Flat Panel with 3-phase adapter Set of instructions for assembly, operation and safety
TECHNICAL CHANGES
Changes in the sense of technical progress can be made without prior notice.
DESCRIPTION OF PARTS
LED Flat Panel for with 3-phase adapter and integrated, LED power supply, ratable, Housing: Die-cast aluminum, colour: Black or white
TECHNICAL DATA
Connected load (220-240V, 50-60 Hz)
62W| 78W
CCT 4000K| CCT 3000K| CCT 4000K| CCT 3000K
TFP-60NW1xS (30°) TFP-60NW1x (60°) TFP-60NW1xF (90°) TFP-60NW1xDA (20° double
asymmetrical)| TFP-60WW1xS (30°) TFP-60WW1x (60°) TFP-60WW1xF (90°)
TFP-60WW1xDA (20° double asymmetrical)| TFP-80NW1xS (30°) TFP-80NW1x (60°)
TFP-80NW1xF (90°) TFP-80NW1xDA (20° double asymmetrical)| TFP-80WW1xS (30°)
TFP-80WW1x (60°) TFP-80WW1xF (90°) TFP-80WW1xDA (20° double asymmetrical)
Light source:
A.L.S. GmbH – EP830790-2-60NW1| A.L.S. GmbH – EP830790-2-60WW1| A.L.S. GmbH –
EP830790-2-60NW1| A.L.S. GmbH – EP830790-2-60WW1
This luminaires contains one light source of energy efficiency class D
Inrush current:
At 62W = 13,6A bei 220μs| At 78W = 19,8A bei 220μs
Circuit breaker 16 A
Type B at 62W| Type C at 62W| Type B at 78W| Type C at 78W
23 Stack| 36 Stack| 19 Stack| 29 Stack
Dimensions (LxWxH): 582x190x116 mm Installation: indoors| Protection class: I
Protection type: IP20| Not dimmable CRI >90
---|---|---
The product consists of two components. Luminaire with light source and external LED Driver.
-
The light source is only exchangeable by a professional.
-
The LED driver is only exchangeable by a professional.
| Protection class I| 
| Notification of Risks| | Not dimmable
---|---|---|---|---|---
| CE label| 
| Safety Instructions| | The
product is only for use in interiors.
| Cleaning Instructions| 
| The product may not be disposed of in the household garbage| |
It is not allowed to cover luminaires with heat insulating cover sheet or
similar materials!
| Don’t look directly into the LED! The LED is that bright that it might
damage your eyes!| | Installation only by qualified and authorised persons.
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS
PRODUCT. KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE USE.
The warranty claim and guarantee is
rendered invalid in the event of damage to the product, which is caused by not
following the operating instructions. We are not liable for the consequent
damage. Because of specific characteristics of LED‘s (life, deviation in
colour etc.) we formulated special terms for planing and installing our LED
products. They are part of these installation manual! Should they not be
available, request them please!
SAFETY INFORMATION
The light is suitable for lighting purpose indoors.- The LED light is provided for load-bearing and suspended ceiling with ceiling cut-out according to data sheet. Sizes see technical data.
Do not attach any additional loads such as decorations and / or signs to the luminaire!- Don’t install under power.
- Follow the instruction manual for installation.
- Installation only by qualified and authorised persons.
- Do not use the product when it has been damaged (defective covers) or there are operational faults such as flickering, smoking, steaming, crackling noises or the smell of smoke.
A damaged or defective product must be changed or repaired by the manufacturer, a service person or a comparable qualified person.- Installation only under observance of the valid guidelines specific to application and country among others VDE 0.100.
- Never open one of the electrical operating agents or plug any objects into them. Such procedures signify a danger to life through electrical shock.
- Absolutely avoid contact between the product and water or other liquids. For reasons of electrical safety, the light may not be placed in contact with water or other liquids or submerged in water.
- The product may not be changed or modified.
- Don’t look directly into the LED! The LED is that bright that it might damage your eyes!
- Surface radiates heat!
MAINTENANCE AND CLEANING
The light source is only exchangeable by a professional.
Do not use solvents, such as benzene and similar agents. The light would be damaged thereby.- Only use a dry, lint-free cloth for cleaning the product
DISPOSAL
The packaging consists of environmentally friendly materials. Dispose of them in the local recycling containers.
Do not dispose of this product in the
household garbage when it has reached the end of its lifecycle, but rather
take it to a disposal center. Your local officials will provide you with
information about collection offices and their business hours.
Installation Instruction
-
Switch off before installation. Switch on only after complete installation and examination of the circuit. Professional electrician for installation and maintenance only. Turn Off power supply before starting any installation. Read instructions & check you have all the tools and accessories to complete the installation correctly
-
Check the adapter before inserting it, if all plastic locks and contacts are flush in the adapter! All interlocks and switching positions must be in zero position! Failure to do so will destroy the adapter and must not be used any more!
Fixing materials:
The warranty is void if the buyer or a third party repairs or modifies the luminaire.
-
Attention! Adapter can only be installed in 3phase track in one direction.
Locking mechanism must be placed on track side like marked with A.
03a Place the luminaire in the correct position with the track adapter.
03b Lock the retaining latches 1.
-
Lock the retaining latches 2 and check for tight fit of the light in the track.
-
Use the contact selector switch 1/2/3 to put the luminaire into operation.
Avoid looking too long in the light exit near the light, they
could damage your eyes.
-
Do not attach any additional loads such as decorations and / or signs to the luminaire!
Turn on the power
Another installation / assembly / materials / types than provided in the manual sheets, release us from any electrotechnical and electrostatic responsibility.
Customer Support
address | contact
A.L.S. GmbH
Mastorter Str. 31 | 88069 Tettnang (Germany)
Tel.: +49 (0) 75 42 93 44-0 | Fax.: +49 (0) 75 42 93 44-30
E-Mail: info@als.de | Web:
www.als.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>