ALS MIN-17NW LED Track Spotlight Instruction Manual
- September 6, 2024
- ALS
Table of Contents
ALS MIN-17NW LED Track Spotlight
Specifications
- Product: LED Track Spotlight with Adapter
- Luminaire Housing: Aluminum die-cast
- Colors Available: White or Black
- Connected Load: 220-250V, 50 Hz
- Light Source: Bridgelux COB
- Protection Class: II
- Energy Efficiency Class: E
- Not Dimmable
Product Usage Instructions
Safety Instructions
- This product is for indoor use only.
- Do not dispose of the product in household garbage; use local recycling facilities.
- Avoid looking directly into the LED light to prevent eye damage.
Cleaning Instructions
- The LED luminaire gets warm during operation, so handle with care.
- Do not attempt to dim the light.
Maintenance
- The light source and LED driver should only be replaced by a professional.
Disposal
- Dispose of packaging in local recycling containers.
- When the product reaches the end of its lifecycle, take it to a disposal center; do not put it in household garbage.
Intended Usage
This product is designed for illumination purposes only.
FAQ
-
Can I replace the light source myself?
No, the light source should only be replaced by a professional. -
What should I do with the product at the end of its lifecycle?
Take it to a disposal center and do not dispose of it in household garbage. -
Is the LED dimmable?
No, the LED light is not dimmable.
DESCRIPTION OF PARTS
LED track spotlight with adapter Luminaire housing: Aluminum die-cast, colour: White or black
TECHNICAL DATA
Indoors, operation only in power-track-systems (Global, Eutrac, Erco, Nokia) Protection class: II | Protection class: IP20 | Available beam angle: 15°/40°/60°CRI>90 | Not dimmable
Art.-No.| Connected load
220-250V, 50 Hz
| CCT| Light source:
Bridgelux COB
| Eprel- No.
---|---|---|---|---
MIN-17NW| 17W| 4000K| BXRE-40G20F0-C-83| 1115635
MIN-17WNW| 17W| 3500K| BXRE-35G20F0-C-83| 1115634
MIN-17WW| 17W| 3000K| BXRE-30G20F0-C-83| 1024000
MIN-17SW| 17W| 2700K| BXRE-27G20F0-C-83| 1115627
MIN-25NW| 25W| 4000K| BXRE-40G20F0-C-83| 1115635
---|---|---|---|---
MIN-25WNW| 25W| 3500K| BXRE-35G20F0-C-83| 1115634
MIN-25WW| 25W| 3000K| BXRE-30G20F0-C-83| 1024000
MIN-25SW| 25W| 2700K| BXRE-27G20F0-C-83| 1115627
MIN-32NW| 32W| 4000K| BXRE-40G20F0-C-83| 1115635
---|---|---|---|---
MIN-32WNW| 32W| 3500K| BXRE-35G20F0-C-83| 1115634
MIN-32WW| 32W| 3000K| BXRE-30G20F0-C-83| 1024000
MIN-32SW| 32W| 2700K| BXRE-27G20F0-C-83| 1115627
This luminaires contains one light source of energy efficiency class E
Dimensions
- Height incl. power track: 113 mm
- Luminaire height: 90 mm
- Luminaire head : Ø90 x H90 mm
The product consists of two components. Luminaire with light source and internal power supply.
- The light source is only exchange-able by a professional.
- The LED driver is only exchangeable by a professional.
Protection class II
CE label
The product is only for use in interiors.
The product may not be disposed of in the household garbage
Don’t look directly into the LED! The LED is that bright that it might damage
your eyes!
Notification of Risks
Safety Instructions
Cleaning Instructions
LED luminaire gets very warm during operation. Be careful when touching the
body.
Not dimmable
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT.
KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE USE.
The warranty claim and guarantee is rendered invalid in the event of damage to
the product, which is caused by not following the operating instructions. We
are not liable for the consequent damage. Because of specific characteristics
of LED‘s (life, deviation in color etc.) we formulated special terms for
planning and installing our LED products. They are part of these installation
manuals! Should they not be available, request them please!
SAFETY INFORMATION
The luminaire is suitable for indoor use only, in dry and closed rooms.
- Don’t install under power.
- Follow the instruction manual for installation.
- Installation only by qualified and authorised persons.
- Do not use the product when it has been damaged (defective covers) or there are operational faults such as flickering, smoking, steaming, crackling noises or the smell of smoke.
- A damaged or defective product must be changed or repaired by the manufacturer, a service person or a comparable qualified person.
- Installation only under observance of the valid guidelines specific to application and country among others VDE 0.100.
- Never open one of the electrical operating agents or plug any objects into them. Such procedures signify a danger to life through electrical shock.
- Absolutely avoid contact between the product and water or other liquids. For reasons of electrical safety, the light may not be placed in contact with water or other liquids or submerged in water.
- The product may not be changed or modified.
- In operation or after extended periods of operation, avoid touching the external surface of the LED luminaire, there is a danger of high temperatures that can cause burns.
- Don’t look directly into the LED! The LED is that bright that it might damage your eyes!
- The luminaire must not be exposed to high levels of dust.
MAINTENANCE AND CLEANING
The light source is only exchangeable by a professional.
- Do not use solvents, such as benzene and similar agents. The light would be damaged thereby.
- Only use a dry, lint-free cloth for cleaning the product.
DISPOSAL
- The packaging consists of environmentally friendly materials.
- Dispose of them in the local recycling containers.
Do not dispose of this product in the household garbage when it has reached the end of its lifecycle, but rather take it to a disposal center. Your local officials will provide you with information about collection offices and their business hours.
MIN
LED track spot light
- MIN-18NWxxxx MIN-18WNWxxxx MIN-18WWxxxx
- MIN-18SWxxxx MIN-25NWxxxx MIN-25WNWxxxx
- MIN-25WWxxxx MIN-25SWxxxx MIN-32NWxxxx
- MIN-32WNWxxxx MIN-32WWxxxx MIN-32SWxxxx
INTENDED USAGE
This product will only serve the purpose of illumination.
SCOPE OF DELIVERY
- LED track spotlight with adapter
- Set of instructions for assembly, operation and safety
TECHNICAL CHANGES
Changes in the sense of technical progress can be made without prior notice.
- address | contact
- A.L.S. GmbH
- Mastorter Str. 31 | 88069 Tettnang (Germany)
- Tel.: +49 (0) 75 42 93 44-0 | Fax.: +49 (0) 75 42 93 44-30 E
- Mail: info@als.de | Web: www.als.de
-
Switch off before installation. Switch on only after complete installation and examination of the circuit. Professional electrician for installation and main-tenance only. Turn Off power supply before starting any installation. Read instructions & check you have all the tools and accessories to complete the installation correctly.
-
Check the adapter before inserting it, if all plastic locks and contacts are flush in the adapter! All interlocks and switching positions must be in zero position!Failure to do so will destroy the adapter and must not be used any more!Fixing materials:
The warranty is void if the buyer or a third party repairs or modifies the lumi-naire.
-
Attention! Adapter can only be installed in 3phase track in one direction. Locking mechanism must be placed on track side like marked with A.
03a Place the luminaire in the correct position with the track adapter.
03b Lock the retaining latch 1. -
Set phase with side phase selection dial (2) for commissioning the luminaire with the contact selection switch 1/2/3.
Another installation/assembly/materials / types than provided in the manual sheets, release us from any electrotechnical and electrostatic re- sponsibility. -
06a After installation and connection, switch on the mains voltage all-pole. Switch on the associated circuit breaker or turn the fuse on.
Avoid looking too long in the light exit near the light, they could damage your eyes. -
Remove the spotlight
Disconnect the mains voltage from all poles before disassembly.
06a When removing, first set the phase wheel to zero
06b Release the lock and hold the spotlight with one hand!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>