IVES 48088816 Concealed 83 Continuous Hinge Instructions
- September 16, 2024
- IVES
Table of Contents
IVES 48088816 Concealed 83 Continuous Hinge
Product Information
Specifications
- Material: Steel
- Finish: Zinc-plated
- Thickness: 0.050 GA. (1.3 mm)
- Length: 83.118″ (2111.2 mm)
- Template Number: 48088816(A)
Product Usage Instructions
Installation
- Ensure the door and frame are properly aligned for hinge installation.
- Use appropriate tools to secure the hinge in place.
- Check for smooth operation of the hinge before finalizing the installation.
Maintenance
Regularly lubricate the hinge mechanism to ensure smooth functioning and
prevent rusting.
Adjustment
If the door alignment is off, adjust the hinge screws slightly until the door
sits flush with the frame.
Cleaning
Use a mild detergent and a soft cloth to clean the hinge surface. Avoid harsh
chemicals that may damage the finish.
DIMENSION
INSTRUCTION
Note: Total Door Undersizing
- Single Square Edge Door – 13/32″
- Single Bevel Edge Door – 7/16″
- Pair of Doors, each leaf, Square Edge Door – 3/8″
- Pair of Doors, each leaf, Bevel Edge Door – 13/32″
If purchased before 11/1/24, refer to template 829657
83” 700 CONCEALED
CONTINUOUS HINGE TEMPLATE
© 2024 Allegion
48088816
Rev. 08/24-a
NOTE: DIMENSIONS IN ( ) ARE IN MILLIMETERS
TEMPLATE
NUMBER: 48088816(A)
FAQ
Q: What is the recommended clearance for the hinge installation?
A: For square edge doors, a minimum clearance of .250″ (6.4 mm) is
required, while for beveled edge doors, a minimum clearance of .281″ (7.1 mm)
is recommended.
Q: Can this hinge be used on exterior doors?
A: This hinge is designed for interior use. For exterior doors, consider
a weather-resistant hinge.
Q: How do I determine the correct size hinge for my door?
A: Measure the thickness and height of your door to select a hinge that
matches these dimensions. Consult the template provided for further guidance.