Ives 11-10810 DBL 299 RS-8 Center Template Instructions
- June 12, 2024
- IVES
Table of Contents
Ives 11-10810 DBL 299 RS-8 Center Template
Product Information
The product is a set of fasteners designed for hollow metal applications. It
includes #8 FHMS (Flat Head Machine Screws) with dimensions 8-32 x 1/2. The
set also includes a double lip strike plate with the model number DBL 299 RS-8
CENTER. The template
number for this product is 11-10810.
Product Usage Instructions
- Ensure that you have the necessary tools for installation, including a screwdriver and a drill (if required).
- Identify the hollow metal application where you want to install the fasteners.
- If necessary, use the provided template number to locate the correct drilling points on the hollow metal surface. The dimensions in the template are given in millimeters.
- Once the drilling points are identified, use a drill to create pilot holes at those points.
- Take the #8 FHMS fasteners and align them with the pilot holes. Insert them into the holes and tighten them using a screwdriver.
- If applicable, position the double lip strike plate (DBL 299 RS-8 CENTER) in the desired location on the hollow metal surface.
- Secure the strike plate by using the provided #8 FHMS fasteners. Insert them through the holes in the strike plate and tighten using a screwdriver.
- Double-check all fasteners to ensure they are securely tightened.
Note: Please refer to the product manual for any additional instructions or safety precautions specific to your application.
DIMENSION
Packed with 8-32 x 1/2″ fasteners for hollow metal applications.
NOTE: DIMENSIONS IN ( ) ARE IN MILLIMETERS
© 2022 Allegion Rev. 07/22-c
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>