GOOSKY S2 Helicopter Setup In Spektrum ix12 Radio Instructions

June 12, 2024
GOOSKY

GOOSKY S2 Helicopter Setup In Spektrum ix12 Radio

Product Information

The Goosky S2 Helicopter is a high-quality remote-controlled helicopter designed for experienced users. It is compatible with the Spektrum ix12 radio, providing precise control and advanced features for an immersive flying experience.

Product Usage Instructions

  1. Create a new model on the Spektrum ix12 radio, ensuring that the initialization settings are kept.
  2. Set the category to “Helicopter” to optimize the radio’s settings for helicopter control.
  3. Set the throttle hold (HOLD) function to enable safe handling and prevent accidental throttle activation.
  4. Configure the flight 3D switch to control advanced flight modes and maneuvers.
  5. Set a switch on the radio to control the switching between attitude mode and 3D manual mode.
  6. Adjust the throttle curve to “NORMAL” for standard flight mode, and “IDLE 1” and “IDLE 2” for different throttle responses during advanced maneuvers.
  7. Set the pitch curve to “NORMAL” for standard flight mode, and “IDLE 1” and “IDLE 2” for different pitch responses during advanced maneuvers.
  8. Enter the forward and reverse interface of the servo settings to fine-tune the control of each channel according to the helicopter’s specific requirements.

Note: It is important to remember that each channel’s settings should be adjusted based on the actual control requirements of your Goosky S2 Helicopter.

INSTALLATION INSTRUCTION

  1. Create a new model (keep initialization)GOOSKY-S2-Helicopter-Setup-In-Spektrum-ix12-FIG-1
  2. Set the category to Helicopter. GOOSKY-S2-Helicopter-Setup-In-Spektrum-ix12-FIG-4
  3. Set the throttle hold (HOLD)GOOSKY-S2-Helicopter-Setup-In-Spektrum-ix12-FIG-5
  4. Set the flight 3D switch
  5. Set the switch to control the switching of attitude mode/3D manual modeGOOSKY-S2-Helicopter-Setup-In-Spektrum-ix12-FIG-7
  6. Set throttle curve NORMAl, IDLE 1\IDLE 2
  7. Set the pitch curve NORMAl, IDLE 1\IDLE 2
  8. Enter the forward and reverse interface of the servo settings

Note: Each channel is subject to the actual control of the helicopter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals