GOOSKY S2 Helicopter Controller User Guide

52
Quick Start Guide

Disclaimer statement

• This praduct i not a toy and is not intended for use: by persons under the age of 14. Do not let children touch the 52, and be very careful when operating ina scene where children are present,

• This productis a competitive helicopter, which will provide 3 relaxed and comfortable fing experience when the power supply is working properly and the ‘components are not damaged.

• Please be sure to read ths document, product manua, and transmitter manual carefully before using the product to understand your legal rights, responsibilities and safety instructions. Otherwise, it may cause property damage, safety accidents and personal safety hazards. Once you use this product, you are deemed to have understood, recognized and accepted all the terms and content of this document.
  The user undertakes to be responsible for his own actions and all consequences arising therefrom.

• GOOSKY shall not be lable for all lsses caused by the user’ falure to use the product i accordance with this quideline, product manual, and remote contral manual.
  In compliance vith laws and regulations, GOOSKY.
  has the finalright o interpret this document.

Precautions

• 52 aerbatic helicopter has certain dangers. Before ‘operation, be sure to read the quide or instruction o ensure the safety of use, 50 as ot to accdentally njure yourself or others.
• Please fly in an open outdoor environment and away from crowd:
• Please keep away from high-tension towers or high-voltage cables to avoid electromagnetic interference.
• Before flying, check the amount of the power of the remote control and the helicopter to ensure that the. equipmentis powered,
• Be sure to fully charge the battery before using it then flying

Introduction to the functions of the remote control

Note: The picture shows the MODE-2 (left-hand throttle) remote control

Introduction to indicator light of flight control

Introduction to LED indicator light of flight control

Blue light flashes slowly| No binding
Blue light stays on| Binding success
Red light stays on| Pose mode
Red light flashing| Manual mode
Green light stays on| Turn off pose mode
Link status indicator between APP and flight control
Blue light flashes quickly| Android APP connectedsuccessfully
Blue light stays on| IOS APP connected successfully

Introduction to flight control bind

“Turn on the GOOSKY T8 transmiter, press the BIND button for 3 times afer the helcopter i powred on. The blue ight flashes quicly. Keep the ransmite less than one meter away from the fig: control The fight control passes self- detection when the blue ight & s0ld on.Then the binding is done. “Turn on the Futaba transmitte,acjust the commurication protocol o (5-11155) Press and hold the BIND button when the  helcoprer is powered on, the bl lght fashes quicky then Keep the transmittr e than one meter away rom  he flght control. The fight contro passes self-cetection when the blue lights50ld on. Then the binding is done.
Note: The main biades must be disassembled before the helicopter is powered on.

Introduction of flight control interface

1. CHI-CH2-CH3-CH4: Servo interface.
2. DSMX: Suppot pprm, dsm, dsm; the interface uses HX1.5mr pitch 3P plug
3. 5-BUS: Suppo’t S-BUS, the interface uses J5 T1.25mm pitch 37 plug.
4. UART: Bluetooth interface.
   Note:For the detalled function nraduction ofthe t control, please go to the offica Senice and Support,and downioad the okt control Setting manual to view the detailed introduction.

Other brand remote control and 52 connection, setting process
Note: For safety, it is recommended to disassemble the main blades and tail blades of the helicopter

1. The receiver is inserted into the fight control  receiverinterface, and binding with the remote control
2. Create a new model in the remote control
3. Choose Helicopter
4. Select the type of swashplate (H-1)
5. Set throtte lock.
6. 5t 5 channels, manual, pose mode switch
7. Set throttle curve
8. 5et pitch cuve
9. Check Channel Reverse (Thvortic)
   Note: For the remote control parameter setting tutorial, please o to the official website > Service and Support, download the relevant manual, and View the detailed introduction.

Information about the official website

1. Website: ww.GOO-SKY.com.
2. 0ffical website > service and support, there are. product manuals and various remote control setting instructions, APP usage guidelines, fight control usage guidelines, etc

http://goo- sky.com/Content/2117191.html?SiteType=1&noLoadDesignFrame=1&SiteType=1&view=1

APP Download

1. The APP can be downloaded by searching GOOSKY in the App Stare or Google Play,or by scanning the QR code provided by GOOSKY.
2. To download and use the GOOSKY APP on mobile phones, users need to authorize relevant permissions to avoid affecting the use.

https://www.pgyer.com/fhqb

APP Instructions for Use

1. When iPhone is connected to the helicopter, the connected Bluetooth name is: GOOSKY-10S 000, and the last five digits are digital codes. The code of each Bluetooth module s unique. Be careful not to connect incorrectly.
2. When Android phone is connected to the helicopter, the connected Bluetooth name i GOOSKY-Android-oooex,and the last five digits are digital codes. The code of each Bluetaoth module is unique. Be careful not to connect incorrectly.
3. For the GOOSKY APP instruction and parameter adjustment, please go to the offcal website > Service and Support, download the APP instruction, and view the detailed introduction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>