Bluescape BS500HT Hot Tub and Pool Bluetooth Floating Speaker User Guide
- September 16, 2024
- Bluescape
Table of Contents
BS500HT Hot Tub and Pool Bluetooth Floating Speaker
“`html
Product Specifications
-
Model: BS500HT_EN_08132024
-
Waterproof Rating: IPX7 (Immersible in up to 3 feet of water
for 30 minutes) -
Speaker Features: Volume control, light modes, hands-free
calling -
Charging: USB Charging
Product Usage Instructions
Charging Your Device
1. Make sure your device is fully charged.
2. Use the included charging cable to connect your device to
power.
3. A sound prompt will play when the speaker’s battery is
low.
Powering On
1. Press and hold the power button for 3 seconds to turn your
speaker on.
2. The speaker will automatically enter Pairing Mode.
Note: The speaker will automatically turn off if no device is
connected after 10 minutes.
Pairing to a Mobile Device
Note: The speaker will automatically connect to the last
connected device if available. If not, the speaker will enter
Pairing Mode.
FM Radio
1. Press and hold the light button for 3 seconds to switch to FM
mode.
2. The device will automatically scan and save radio stations
with good reception each time you switch to FM mode.
Indicator Light
- Flashing Blue Light: Connecting
- Steady Blue Light: Connected to a device
- Steady Red Light: Charging
- Light Off: Device is fully charged
Light Modes
Press the light button to cycle through the different light
modes.
Frequently Asked Questions (FAQ)
Q: Can the speaker be submerged under water for long
periods?
A: No, the speaker is recommended for poolside use and can
withstand some interactions with water but should not be submerged
for long periods.
Q: How many FM channels can the speaker typically yield?
A: The speaker typically yields 2-3 clear FM channels, but in
some cases, there may be up to 6 clear FM channels.
“`
QUICK START GUIDE
Hot Tub & Pool Bluetooth® Floating Speaker
BS500HT_EN_08132024
Read Before Use
Close the waterproof rubber cover completely before putting the speaker into
the water.
To preserve battery lifespan, fully charge it at least once every month even
when not in use.
Avoid extreme temperatures (such as high heat, fire, and direct sunlight).
Excessive heat or extreme cold temperatures may damage the battery.
Do not charge near the water source or in the rain to avoid electric shock.
Keep the speaker away from heat sources (including all equipment that
generates heat) such as stoves and engines.
Do not use any corrosive cleaner/oil to clean. Disconnect your speaker from
the charger when fully charged. Do not charge your speaker for extended
periods. Avoiding dropping the device. Do not disassemble.
NOTE: This speaker is recommended for poolside use and is not meant to be
submerged under water for long periods of time. It can withstand some
interactions with water.
IPX7 = Immersible in up to 3 feet of water for 30 minutes.
Overview
A E
B
C
D
A
Volume+ / Next Track
B
Volume- / Previous Track
C Light
D Power E USB Charging
Press once to increase volume. Press and hold to play next track.
Press once to decrease volume. Press and hold to play previous track.
Press to cycle between the 8 light modes. Press and hold for 3 seconds to turn
FM Mode on/off.
Press once to play/pause the music. Press and hold to power on/off. Press
twice to enter TWS Mode
Hands-Free Calling Press once to answer/end a call. Press and hold to reject a
call.
Use the included charging cable to charge your device.
Getting Started
CHARGING YOUR DEVICE
Make sure your device is fully charged. Use the included charging cable to
connect your device to power. A sound prompt will play when the speaker’s
battery is low.
POWERING ON
Press and hold the power button for 3 seconds to turn your speaker on. The
speaker will automatically enter Pairing Mode.
Note: The speaker will automatically turn off if no device is connected after
10 minutes.
PAIRING TO A MOBILE DEVICE
On your smartphone or tablet, search for the Bluetooth® device named “Hot Tub
Speaker” and tap to connect.
Note: The speaker will automatically connect to the last connected device if
available. If not, the speaker will enter Pairing Mode.
FM RADIO
Press & hold the light button for 3 seconds to switch to FM mode.
The device will automatically scan and save radio stations (87.5108) with good
reception each time you switch to FM mode. While scanning, the indicator light
will flash rapidly; when done
Getting Started
scanning, the light will flash slowly. Press the power button to stop
scanning.
Press & hold the previous/next buttons / to access saved radio stations.
Press & hold the light button for 3 seconds to exist FM mode and switch to
Bluetooth® mode.
NOTE: While in FM mode, insert the included charging cable into the speaker’s
charging port to use it as an external antenna and improve signal.
NOTE: This speaker typically yields 2-3 clear FM channels. In some cases,
there may be up to 6 clear FM channels.
INDICATOR LIGHT
Flashing Blue Light Steady Blue Light Steady Red Light Light Off
Connecting Connected to a device Charging Device is fully charged
Getting Started
LIGHT MODES
Press the light button modes below:
to cycle through the different light
1
Blue, green, red – flash slowly
2
Steady blue
3
Steady green
4
Steady red
5
(Sound-Reactive) Blue, green, red, gradient – flash quickly
6
(Sound-Reactive) Blue, green, gradient, red – flash quickly
7
(Sound-Reactive) Gradient
8
X
Lights off
RESETTING YOUR DEVICE
To reset your device, press and hold the light button for 8 seconds.
Product Features
Bluetooth® 5.4 Wireless Connectivity up to 33 Feet Built-In Rechargeable
Battery Up to 6 Hours of Playtime (Battery life is measured as number
of hours of playtime with the volume set at 50% and lights off) FM Radio
Multicolor Sound Reactive LED Lights True Wireless Stereo Pair Two Speakers
for a Stereo Surround
Sound Experience Battery Capacity: 1200 mAh 3.7V Audio Output: 3W Input: 5V/1A
Waterproof Rating: IPX7 Speaker Size: 5 x 5 x 3.34 inches (12.7 cm x 12.7 cm x
8.4 cm)
Warranty Information
LIMITED WARRANTY
DP AV (the “Company”) warrants this new product purchased and contained in
this package (the “Product”) against defects in material or workmanship for 90
Days (Parts & Labor) and 1 Year (Limited) from the date of delivery. In order
for the Company to honor this limited warranty, you must present a valid proof
of purchase or delivery, as applicable (e.g. a receipt or delivery notice that
also shows purchase) of this Product. IMPORTANT NOTE: The customer is
encouraged to carefully inspect the Product upon receipt after purchase
especially prior to any assembly, disassembly, mounting, installation or
utilizing a thirdparty product of any kind, such as a decorative or protective
cover or case.
This warranty is void if the Company deems, in its discretion, that the
Product may have been damaged when the packaging was opened, through
modification, improper transport, improper storage, improper use, improper
assembly or disassembly, exposure to adverse elements, mounting or other
installation, end user negligence, water damage or tampering of the barcode of
the Product. This warranty does not apply: (a) to cosmetic damage, including
but not limited to screen damage, a cracked display, scratches, dents and
broken ports; (b) to damage caused by accident, abuse, misuse, fire, water
vapor exposure, excessive exposure to humidity, water or other liquid contact,
earthquake or other external cause; (c) to defects caused by normal wear and
tear or otherwise due to the normal aging of the product;
Warranty Information
(d) if any serial number has been removed or defaced from the product; or (e)
to damage caused by installation or mounting, assembly or disassembly, use
with a third party device, cable, protective or decorative cover/case,
component or product that does not meet the Company’s product specifications.
This warranty is a limited warranty for repair of the Product or replacement
of the Product with a new or refurbished product, subject to the conditions
set forth herein.
The Company is not liable for consequential, indirect, incidental, special or
punitive damages and the Company’s total liability hereunder shall not exceed
an amount greater than the retail purchase price of the product.
90 DAYS PARTS & LABOR
The Company warrants to you as the original retail purchaser of the Product,
that should the Product have any warranted defect out of the packaging, under
normal conditions, such defect(s) will be repaired or replaced with a new or
refurbished part (at the Company’s sole discretion) without charge, if the
Product is submitted to the Company within a period of ninety (90) calendar
days from the date of delivery of the Product. The customer is responsible for
transportation cost and insurance charges (if applicable) to the Company and
must be able to document a clear proof of delivery to the Company as well as
proof of registered receipt by the Company. It is the customer’s
responsibility to retain original packaging or
Warranty Information
provide like packaging in order to facilitate the warranty repair or
replacement process. The Company will incur no liability whatsoever to provide
packaging for warranty items. Should the product be damaged en route to the
Company due to insufficient or improper packaging or improper transport, the
warranty may be voided. You must receive a return authorization number (RMA#)
before sending the unit in for service. This warranty only applies to
manufacturer defects, and the Product must be returned to the Company in its
original condition.
1 YEAR LIMITED PARTS
If determined to be covered under warranty, the one (1) year (from delivery)
limited parts warranty gives the customer the option to return the Product to
the Company for repair or replacement. The customer will be responsible for
labor charges. This warranty does not cover any incidental or indirect costs
incurred as a result of a defect in the Product, including any consequential,
incidental or indirect damages.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that
to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MODEL: BS500HT FCC ID: 2AVRVBS500HT
For product assistance & missing or replacement parts: WE CAN HELP
1-833-909-2673
MONDAYS-FRIDAYS 7:00am – 5:00pm PST
Find more at Walmart.com