YELLOW JACKET 60650 Torque Wrench Instructions
- September 17, 2024
- YELLOW JACKET
Table of Contents
60650 Torque Wrench
“`html
Product Information
Specifications:
- Product Name: Precision Torque Wrench
- Model: 60650
- Designed for: Ductless mini-split flare nut sizes
- Torque Range: 10-80 N-M or 7.459 ft. lb.
- Head Sizes (6 Heads): 17, 22, 24, 26, 27 & 29 mm
- Head Sizes (8 Heads): 16, 17, 21, 22, 24, 26, 27 & 29
mm
Product Usage Instructions:
1. Torque Wrench Kit Assembly:
1. Select the appropriate head size based on the flare nut to be
tightened.
2. Attach the selected head securely onto the torque wrench.
2. Torque Adjustment:
1. Rotate the adjustment mechanism to set the desired torque
level within the range of 10-80 N-M or 7.459 ft. lb.
3. Tightening Procedure:
1. Place the wrench on the flare nut to be tightened.
2. Apply pressure in a controlled manner until the wrench
signals the desired torque is reached.
4. Maintenance:
1. Keep the wrench clean and store it in a dry place when not in
use.
System Tools – Solenoid Service Magnet
Specifications:
- Opening: 0.75 in (18 mm)
- Diameter: 1.5 in
- Length: 1.6 in
Product Usage Instructions:
1. Testing and Control:
– Use the magnet to test, troubleshoot, or manually activate and
control various solenoid valves.
2. Recovery and Evacuation:
– Hold a solenoid valve open during recovery and evacuation for
system access.
3. Other Uses:
– The magnet can be used for other applications requiring
magnetic control or assistance.
FAQs:
Q: Can the torque wrench be used for applications other than
ductless mini-split flare nuts?
A: The torque wrench is specifically designed for ductless
mini-split flare nut sizes and torque requirements.
“`
EDITION 70 CATALOG
PRECISION TORQUE WRENCH
60650
Designed to accommodate the full range of ductless mini-split flare nut sizes
and torque requirements. Easier-to-use and more adjustable than other flare
nut torque wrenches on the market. Precision torque wrench for exact
tightening to 10-80 N-M or 7.459 ft. lb.
· Adjustable in Newton-meters and foot-pound. · Six interchangeable open end
adapters.
60650 (6 Heads): Sizes: 17, 22, 24, 26, 27 & 29 mm 60652 (8 Heads): Sizes: 16,
17, 21, 22, 24, 26, 27 & 29 mm
· The N-M and foot-pound (FT-LB) scales are marked on the barrel of the wrench
for easy and permanent reference.
· The micrometer-type sleeve is easy to read and allows accurate pre-set
torque values to be set. When the set torque is reached, the wrench produces
an audible click and a slight, safe release of tension to prevent over
tightening.
· This product has been designed to be tough, durable and easy to use. It
comes supplied in a blow-molded storage and carry case.
· Accurate within 4% when measured per BSEN 26789 & ISO 6789 & ASME Bl07.14M &
DIN3122 regardless of the open end adapter head used.
The N-M and foot-pound (FT-LB) scales are marked on the barrel of the wrench
for easy and permanent reference.
UPC# 60650 60652
Description Torque wrench kit – 6 heads Torque wrench kit – 8 heads
SOLENOID VALVE SERVICE MAGNET
The YELLOW JACKET® Solenoid Valve Service Magnet is the quickest and easiest
way to manually operate solenoid valves. It works by magnetically lifting the
stem assembly and plunger to actuate the valve during service.
Test and Control
Use this solenoid service magnet to test, troubleshoot, or manually activate
and control a direct connected or pilot operated 2-way solenoid, 3-way reclaim
or 4-way reversing valve, typically found in a reverse cycle air conditioner
or heat pump.
Recovery and Evacuation
This magnet can also be used to hold a solenoid valve open during recovery and
evacuation so the entire system can be accessed.
To optimize recovery, simply remove the solenoid coil from all normally closed
valves refrigerant control valves, hot gas defrost valves, reversing valves,
etc. Then apply the YELLOW JACKET® solenoid magnet to each valve to speed up
recovery and evacuation.
To help isolate solenoid valve issues, remove the coil from the valve and
apply the YELLOW JACKET® solenoid magnet. If the valve actuates, an electrical
or solenoid coil issue is indicated. If the valve actuates but there is no
flow, this indicates a plugged valve. No actuation indicates the problem is in
the valve body itself.
Solenoid Valve
4-Way Reversing Valve
Other Uses
· Use in place of the power head on a hot water oil shutoff valve to eliminate
the need to wait for the delay on open
· Use it to temporarily replace a faulty coil to open the solenoid valve
· Use it to turn the power on or replace the solenoid if it is bad
Specifications Opening: 0.75 in. (18 mm) fits most common
manufactured valves including reversing valves. Diameter: 1.5 in. Length: 1.6
in.
UPC# Description
61192 Solenoid Service Magnet
10.9
10. SYSTEM TOOLS