SAUTER EGQ220F032 Room Transmitter Installation Guide
- September 14, 2024
- SAUTER
Table of Contents
SAUTER EGQ220F032 Room Transmitter
Product Information
Specifications
- Model Numbers: EGQ220F032, EGQ222F032, EGQ120F032, EGH120F042, EGH130F032, EGT130F032, EGT330F053, EGT330F103, EGT332F103, EGT335F103, EGT430F013, EGT430F103
- Operating Conditions: 10-85%RH
- IP Rating: IP20
- Compliance: EN60529, EN60730
- Software Version: A
Product Usage Instructions
Installation
- Ensure the electrical cables are not damaged during installation.
- Secure the room transmitter in a suitable location with proper ventilation.
- Connect the appropriate wires according to the provided diagram.
Operation
- Power on the room transmitter using the specified power source.
- Monitor the readings displayed on the device for temperature, humidity, CO2 levels, and VOC levels.
- Refer to the user manual for interpreting the readings and adjusting settings if necessary.
Maintenance
- Regularly clean the room transmitter using a soft, dry cloth to remove any dust or debris.
- Check for any loose connections or signs of wear on the device components.
- Perform calibration as recommended by the manufacturer to ensure accurate readings.
FAQs
Q: What should I do if the room transmitter displays an error code?
A: Refer to the user manual for a list of error codes and troubleshooting steps. If the issue persists, contact customer support for assistance.
Q: Can I use the room transmitter in outdoor environments?
A: No, the room transmitter is designed for indoor use only. Exposure to outdoor elements may damage the device.
Q: How often should I replace the batteries in the room transmitter?
A: The room transmitter is typically powered by a direct power source and does not require battery replacement. Check the user manual for power requirements.
Models
- EGQ220F032
- EGQ222F032
- EGQ120F032
- EGH120F042
- EGH130F032
- EGT130F032
- EGT330F053
- EGT330F103
- EGT332F103
- EGT335F103
- EGT430F013
- EGT430F103
Features
Dimension
Caution
Installation
EGT332F103/EGT335F103
WARNING
Do not damage the electrical cables when closing the cover!
Contact Information
- © Fr. Sauter AG Im Surinam 55 CH-4058 Basel
- Tel. +41 61 – 695 55 55
- Fax +41 61 – 695 55 10
- www.sauter-controls.com
- info@sauter-controls.com.
UK Importer:
Sauter (GB) Inova House RG24 8GG.