SAUTER EY6RT30 BACnet Testing Laboratories Instructions

SAUTER EY6RT30 BACnet Testing Laboratories

Product Specifications

• Vendor: Fr. Sauter AG

• Location: Im Surinam 55, 4058 Basel,
  Switzerland

• BACnet Protocol Revision: Revision 24

• Firmware Version: V1.0.1b3871

• Device Profiles:

  • BACnet Router (B-RTR)
  • BACnet Broadcast Management Device (B-BBMD)
  • BACnet Secure Connect Hub (B-SCHUB)

• BIBBs Supported:

  • Data Sharing:

  • ReadProperty-B, ReadPropertyMultiple-B

  • Write Property-B, WritePropertyMultiple-B, Change Of Value
    Unsubscribed-B

  • DS-RP-B, DS-RPM-B, DS-WP-B, DS-WPM-B, DS-COVU-B

  • Device Management:

  • Dynamic Device Binding-A, Dynamic Device Binding-B, Dynamic Object Binding-B, DeviceCommunicationControl-B

  • time synchronization-B, UTCTime Synchronization-B

  • ReinitializeDevice-B, Backup, and Restore-B

  • Restart-B, List Manipulation-B, Router Configuration-B, BBMD Configuration-B, Foreign Device Registration-A, Secure Connect Hub-B

  • Object Type Support: Device, File, Network Port

  • Data Link Layer Options: Media – BACnet/IP (Annex J), BACnet/SC

  • Character Set Support: ISO 10646 (UTF-8)

Product Usage Instructions

1. Ensure the device is properly connected to the network using the specified media (BACnet/IP or BACnet/SC).
2. Access the device configuration settings using the provided model numbers and firmware version.
3. Configure the device profiles based on your requirements (BACnet Router, Broadcast Management Device, Secure Connect Hub).
4. Utilize the supported BIBBs for data sharing and device management as needed.
5. For advanced configurations, refer to the object type support and data link layer options.

Frequently Asked Questions (FAQ)

Q: How do I update the firmware of the Modulo 6 BACnet Router and SC-Hub?

A: To update the firmware, please follow these steps:

1. Download the latest firmware version from the vendor’s official website.
2. Access the device’s configuration interface and navigate to the firmware update section.
3. Select the downloaded firmware file and initiate the update process.
4. Wait for the update to complete and ensure the device restarts successfully.

Q: What should I do if I encounter connectivity issues with the device?

A: If you face connectivity issues, please try the following troubleshooting steps:

1. Check the network connection and ensure all cables are securely plugged in.
2. Verify that the device settings match your network configuration.
3. Restart the device and check if the issue persists.
4. Contact customer support for further assistance if the problem continues.

• BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse, approve, or test products for compliance with ASHRAE standards.
• Compliance of listed products to the requirements of ASHRAE Standard 135 is the responsibility of BACnet International.
• BTL is a registered trademark of BACnet International.

BACnet Testing Laboratories Product Listing

• BACnet functionality in each Listed product has been successfully tested at a Recognized BACnet Testing Organization utilizing the industry standard BTL test suite and test policies that were current at the time it was tested.
• For Listings with multiple products, some products may have less functionality than the Listing document indicates. The PICS document provides information on the specific functionality of each product.
• Note that the manufacturer provides PICS documents on the BTL Listings site and are not independently verified by BTL.

Listing Information (BTL-31125)

Device Profiles

BACnet Router (B-RTR) BACnet Broadcast Management Device (B-BBMD) BACnet Secure Connect Hub (B-SCHUB)| **** All models

BIBBs Supported

Object Type Support

Data Link Layer Options

Ethernet
BACnet/SC| Hub

Character Set Support

ISO 10646 (UTF-8)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>