Restore solutions Air Movers With Carpet Clamp User Guide

Restore solutions Air Movers With Carpet Clamp

Specifications

• Product Name: Air Mover

• Function: High Pressure Fan

• Compatible with: Dramatic Boost Bar, Drymatic Mats

• Classes:

  • Class 1: Least amount of water, absorption, and
    evaporation

  • Class 2: A large amount of water, absorption, and
    evaporation

  • Class 3: The greatest amount of water, absorption, and
    evaporation

  • Class 4: Specialty drying situations

• Outcome: Removal of excess moisture from the air, creating a more comfortable and safer environment. Elimination of damp, mold, mildew, and odors.

Product Usage Instructions

• Injection Drying with Dramatic Boost Bar
• Air Movers are great for injection drying with the Dramatic Boost Bar. Ensure proper connection and setup according to the manufacturer’s guidelines.
• Usage with Dramatic Mats
• Air Movers are suitable for inflating lots of Drymatic Mats. Place the mats in the desired location and turn on the Air Mover to facilitate drying.
• Water Damage Classes
• Understand the different water damage classes (Class 1, Class 2, Class 3, Class 4) to determine the appropriate use of the Air Mover for effective drying.

Maintenance

• Regularly clean and maintain the Air Mover according to the user manual to ensure optimal performance and longevity.

FAQ

• Q : Can the Air Mover be used for continuous operation?
• A: Yes, the Air Mover can be used continuously for extended periods to facilitate drying processes.
• Q: How should I store the Air Mover when not in use?
• A : Store the Air Mover in a clean, dry place away from direct sunlight and moisture to prevent damage.

Why Air Movers?

Air Movers are a fantastic tool for drying out large or hard-to-reach areas. Air movers are effective as they increase airflow, meaning moisture gets removed, speeding up the drying process. Moisture saturation – air can only hold a certain amount of moisture, still air around a wet surface quickly becomes saturated, slowing the drying process. An air mover constantly replaces this saturated air with fresh, drier air, allowing for continuous moisture removal.

Air Movers

Types of Air Movers and Coverage:

• 1 x Axial Fan per 6 to 8 lineal meters for *class 2 and 3
• 1 x Axial Fan per 12 to 16 lineal meters for *class 1 and 4
• 1 x Centre Axial Fan (Axial Fan with Fan Stand facing down) 10 to 20 square meters.
• 1 x Radial Fan per 3 to 4 lineal meters for *class 2 and 3
• 1 x Radial Fan per 6 to 8 lineal meters for *class 1 and 4
• 1 x Radial Fan per 10 square meters
• 1 x Air Mover per 3 to 4 lineal meters for *class 2 and 3
• 1 x Air Mover per 6 to 8 lineal meters for *class 1 and 4
• 1 x Air Mover per 10 square meters

High-pressure fans are great for injection drying with the Drymatic Boost Bar Use with the Drymatic 22 Port, 12 Port, 5 Port, 4 Port, 3 Port (never block off the injection ports) Great for inflating lots of Drymatic Mats.

Class 1 (least amount of water, absorption, and evaporation): Water losses that affect only part of a room or area, or larger areas containing materials that have absorbed minimal moisture. Little or no wet carpet and/or cushion is present.
Class 2 (large amount of water, absorption, and evaporation): Water losses that affect at least an entire room of carpet and cushion (pad). Water has wicked-up walls of less than 60cm. There is moisture remaining in structural materials, e.g., plywood, particle board, structural wood, VCT, concrete, and substructure soil.

Class 3 (greatest amount of water, absorption, and evaporation): Water may have come from overhead. Ceilings, walls, insulation, carpet, cushion, and subfloor in virtually the entire area are saturated.
Class 4 (specialty drying situations): These consist of wet materials with very low permeance/porosity (e.g., hardwood, plaster, brick, concrete, lightweight concrete, and stone). Typically, there are deep pockets of saturation, which require very low specific humidity. These types of losses may require longer drying times and special methods.

Outcome

Removal of excess moisture from the air, creating a more comfortable and safer environment. Elimination of damp, mold, mildew, and odors.

restoresolutions.com.au

CREATING HEALTHY INDOOR ENVIRONMENTS ” On The Job” Industry Experience Since 1995

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>