LAVABO Glomp Mini Rimless Wall Hanged Toilet Matte Gray Instruction Manual

LAVABO Glomp Mini Rimless Wall Hanged Toilet Matte Gray

Dimension

NOTE: All measurements for installation must be taken from the finshed wall / floor and toilet. Listed measurements are indicative only.

Wet room protection is carried out based on industry regulations.

PARTS AND TOOLS

Glomp Mini

COLORS

• Chrome
• Matt black
• Solid brass
• Stainless steel

Required purchase, the toilet seat is not included in the delivery.

• 333285: Glossy white
• 333285MH: Matt white
• 333285MG: Matt gray
• 333285MS: Matt black

Necessary tools
Not part of the delivery. The built-in cistern and flush button are purchased separately. A possible option, is the Geberit Duofix Sigma 112 cm built-in cistern.

INSTALLATION INSTRUCTION

IMPORTANT

• It is recommended to set the built-in cistern to 4.5 litres, as a larger water volume and too high a pressure can cause problems with splashing, this can be solved by installing the supplied water pressure reducer (detail A).
• We do not recommend using this toilet with low installation cisterns as they are not able to provide a stable performance.

Installation A

• A Installation dimensions.
• Install the threaded bolts as shown in the picture
• B Install the supplied water pressure reducer (detail A).
• Install the built-in cistern’s flush pipe and drain pipe according to its installation instructions.
• Insert the mounting bushings (detail B) into the toilet’s mounting holes.
• C Place the toilet on the threaded bolts.
• Tighten the screws in the mounting bushings through the toilet seat holes with the Allen key provided.
• Finish with an acid-free sanitary silicone between the toilet and the wall.

Assembly of Soft Close Toilet Seat
NOTE : Some of the drawings may be different from the delivered toilet seat!

• A Install the hinges in the toilet bowl.
• B Loosely tighten the screws.
• C Attach the toilet seat to the hinges.
• D Adjust the toilet seat by sliding it back and forth as well as sideways until the edge of the toilet seat is flush with the toilet bowl.
• E Click the seat o昀昀. NOTE: The clicking function may be different from what is shown in the drawing.
• F Now tighten the screws very firmly.
• G Install the cover caps.
• H Install the toilet seat.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>