Occhio Sento Head Double Sided User Manual
- September 13, 2024
- Occhio
Table of Contents
Occhio Sento Head Double Sided
Safety precautions
- Read through the mounting/ use instructions carefully before installing the luminaire. Follow the safety precautions in these instructions closely and keep the instructions in a safe place.
- This symbol warns you of a dangerous situation which could lead to serious injury or even death if the instructions are not observed. It also draws your attention to possible material damage and provides other important information in connection with this product.
- The assembly and installation of electrical components must be carried out only by qualified personnel. Repairs must be carried out only by authorised, qualified personnel or the manufacturer. Before performing any work on the luminaire (installation, cleaning, etc.), it must be disconnected from the mains supply.
- This symbol draws your attention to situations in which you could look directly into the light of the LED. This may cause an after-image effect and may result in damage to the eyes if you look at the light directly for prolonged periods.
- Maintain the minimum safety distance from flammable materials: 20 cm.
- This symbol warns you of hot surfaces, which could cause burns if touched.
- Caution: When used for prolonged periods, the surface of the luminaire can become hot. Before performing any work on the luminaire (fitting the luminaire etc.), always switch the luminaire off and let it cool for at least 30 minutes.
Product description
- Light output, power of light source 18 W or 26 W (adjustable).
- Lighting effect changeable by using optional inserts, dichroic color filters can be added. Adjustment via heat-decoupled carbon pin (fixation of head against rotation optional).
- Controllable via trailing-edge phasecut dimmer (depending on the power supply unit) or via » touchless control « with gestures at the head.
- Optionally available with Occhio air, additional control via Occhio air app or Occhio air controller. For luminaires with multiple heads, only one » air « head is necessary.
trailing-edge phasecut dimmer and Occhio air not combinable
head without air
Functions / control options
OFF
switch and dim externally (sensor off)
- switch / dimmer *
- switching and dimming external (no » touchless control «)
***** not possible with Sento tavolo, Sento terra, Sento lettura; dimming only with Occhio converter (for a list of compatible dimmers, see www.occhio.com/dim_en, trailing-edge phasecut dimmer)
DIM
touchless control
STEP
up- / down preset (sensor off)
***** dimming only with Occhio converter (for a list of compatible dimmers, see www.occhio.com/dim_en, trailing-edge phasecut dimmer)
head with air
Functions / control options
OFF + » air «
» air « (sensor off)
trailing-edge phasecut dimmer and Occhio air not combinable
Occhio air see seperate manual.
- dimming only with Occhio converter (for a list of compatible dimmers, see www.occhio.com/dim_en, trailing-edge phasecut dimmer)
DIM + » air «
» touchless control « + » air «
STEP without air
up- / down preset (sensor off)
Control via Occhio air controller
Control via Occhio air controller (optional)
Occhio air controller
- Intuitive remote control with four programmable buttons (setup via Occhio air app). Individual luminaires, groups and scenes can be controlled regardless of the app.
- Available with optional wall mount.
- Maximum ease of use and total control via Bluetooth 4.0 (Bluetooth low energy). Switching, dimming, fading, color tune, electric height adjustment of individual luminaires, groups and scenes.
To set up the Occhio air controller, the Occhio air app is required. A video quick start guide can be called up at www.occhio.com/air- tutorials.
controller
Only for luminaires with double-sided light output , color tune or magic move
Mounting
Mounting inserts
Only with setting 18 W
INFO
Mounting inserts
Caution
- Allow the luminaire to cool down for at least 30 min. before all work.
Use several inserts together and pay attention to notes
Mounting inserts
Mounting inserts
- The inserts are completely mounted.
Mounting head + body
- Hold the carbon rod, turn the head until it releases.
heads must be of the same type!
Mounting remove head
remove head
Changing carbon rod /fi xing ring
Fixing ring (optional)
- Orientation as illustrated. Before mounting, undo the grub screw.
- Fit the fixing ring and, if necessary, secure it against turning using a hexagon key.
Appendix
Care instructions
- Always allow the luminaire to cool down before cleaning!
- To clean the luminaire, use a dry microfibre cloth.
- Detailed care instructions are available at www.occhio.com/en/company/faq.
Information & contact
- Your Occhio specialist retailer will gladly answer any other questions
Technical data
Subject to errors and technical change.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>