AVAYA C170 Integrated 4K UHD Video Conferencing Terminal Installation Guide
- September 13, 2024
- Avaya
Table of Contents
AVAYA C170 Integrated 4K UHD Video Conferencing Terminal
Pack List
-
Video Conferencing Terminal x 1
-
Remote Control x 1
-
Power Adapter + AC Power Cable x 1
-
HDMI Cable x 1
-
Quick Installation Guide x 1
-
Quick Start Guide x 1
Front View
- Camera
- Status Indicator
- Microphone
- IR Window
Back View
- MIC IN Interface
- TF Card Slot
- TOUCH/DMIC Interface
- USB 3.0 Interface
- HDMI IN Interface
- HDMI OUT 1 Interface
- HDMI OUT 2 Interface
- LAN Interface
- LINE IN Interface
- LINE OUT Interface
- DC 12V Interface
- ON/OFF Switch
Dimension
Cabling
Remote Control
Notice
The remote control may be affected by strong light and the normal working
range is about 10 meters.
GUI Menu
- IP Address
- H323 Registration Status
- SIP Registration Status
- System Time
- Meeting Menu
- Dongle Menu
- More Menu
Meeting Setup
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Compliance Statements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
a) The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems;
b) The maximum antenna gain permitted for devices in the band 5725-5825
MHz shall comply with the e.i.r.p. limits specified for point-to-point and non
point-to-point operation as appropriate.
User Manual & Operating Manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>