heyday BTSP03S Bluetooth Wireless Speaker User Manual

heyday BTSP03S Bluetooth Wireless Speaker

Included

• Bluetooth Speaker
• Micro USB charging cable

Pairing

• Power ON speaker
• Rapid flashing white light
• Use Bluetooth settings on your phone to pair with HEYDAY SPEAKER 03
  o White light turns solid followed by a chime – pairing successful

OVERVIEW

Indicators

• Flashing Red – Low Battery
• Solid Red – Charging
• No Red Light – Fully Charged
  • Rapid Flashing White – Pairing Mode
  • Solid White – Bluetooth Connected
• Ascending Tones – Power on
• Descending Tones – Power off
• Three Rapid Tones – Ready to pair
• Single Chime – Paired
• Two Rapid Dings – Low battery
• Quick Ascending Tone – Max Volume
• Quick Descending Tone – Min. Volume

Charging

• Full charge requires approximately 2.5- 3.5 hours
• Charging is complete when red light turns off
• Plug micro end of charging cable into back of speaker DC 5V
• Plug USB end of the charging cable into a DC 5V USB power supply

TWS (True Wireless Stereo) pairing

You can pair two of these models of speakers together to get true stereo sound.

• Disconnect your phone from your speakers Bluetooth, or hold the play/bluetooth button to enter paring mode
• Place the speakers together and press the mode button to enter TWS poring
• The speakers will automatically pair to one another, you will hear a chime when they pair
• After the speaker’s ore paired, use your device to connect to HEYDAY SPEAKER 03
• The pairing of multiple speakers does not rely on the “Dual Audio” feature of newer phones

Troubleshooting

• If the speaker is not working correctly, turn it on/off to reset
• If the speaker won’t turn on, recharge the battery and try again
• If the speaker won’t charge, make sure the supply works, is 5V>1A, and not damaged
• If the speaker makes no sound or does not show as on the available device, make sure it is not paired, if so unpair the device and repair the desired device

Need some help?

Can’t get it to pair? Have a question or comment?

Call us at : 877-698-4883 or: 877-MyTgtTech
Online at : TargetTechSupport.com

The speaker is splash resistont, do not submerge under woter

• Do not modify or repair this device
• Do not use in high temperatures or extreme weather
• Do not use chemical detergents to clean your device, use a soft dry cloth

FCC

FCC ID : 2AO23-BTSP03S Model: BTSP03S Input: 5V m Max 1A
Made in China
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Target Corp. Mpls. MN, 55403 Phone: 1-612-304-6073

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>