NEW TRENT NTS30 Wireless Portable Speaker User Manual

NEW TRENT NTS30 Wireless Portable Speaker User Manual

Important Safety Instructions

• Read this user guide carefully before using this speaker
• Keep speaker away from high temperatures. Do not leave it in the sun
  • (Heat degrades battery life span) Keep away from open flames
• Do not expose speaker to liquids or moisture
• Refrain from destroying, modifying,dropping, or throwing speaker
• Always check for power compatibility before charging
• Loud music may impact in hearing loss
• Disassembling the speaker will void warranty of speaker
• At the end of the speaker’s life cycle and warranty period, properly discard speaker according to state law
• Do not store speaker for over a month without usage. We suggest charging the battery from low power to full once a month to preserve battery life

Package Contents

• 1 * NTS30 Portable Speaker
• 1 * USB/ Micro USB Charging Cable
• 1 * AUX Cable
• 1 * User Manual

Product Diagram

1. Power
2. Power Bank On/Off
3. EQ Mode/ Speaker Mode Switch
4. Previous Song
5. Multi-Function/ Play & Pause
6. Next Song
7. Volume Down –
8. Volume Up +
9. NFC
10. AUX Port
11. Reset
12. Micro USB Charge Port
13. USB Port
14. Battery Indicator

Power ON/OFF Operation

Fully charge the speaker before its first use is recommended.

• Hold power button down for 2 seconds to turn on/ off the device.
• There will be a tone when you turn on/ off the speaker.
• The speaker will emit a prompt tone and a blue LED light will flash quickly to indicate that the speaker is in Bluetooth pairing mode.
• The speaker powers off after 10 minutes of inactivity.

Bluetooth Connection Operation

Step 1: Open the Bluetooth menu on your device.
Step 2: Select “NTS30” from the list of available Bluetooth devices. If the system requires a password, please enter 0000.
Step 3: Once paired, the speaker will make a prompt tone and the blue indicator flashes.

Note:

1. When power is on, the speaker automatically attempts to pair with any device that has previously been paired with it.
2. The Bluetooth will automatically disconnect from the device once the speaker powers off.
3. Long press to connect/ disconnect Bluetooth.

NFC Pairing

Activate NFC on you Bluetooth device. Place the device on the NFC logo position of the speaker. The device prompts Bluetooth paring request. Confirm the PAIR, the speaker will make a prompt tone, and the blue indicator light will flash.

Note:
NFC pairing requires a device with both Bluetooth and NFC capacities.

AUX Mode

1. Turn on the speaker.
2. Connect device to the speaker with the AU
3. The speaker is now in the AUX mode.

Note:

1. In AUX mode, you can switch back to Bluetooth mode by short pressing the button or by removing the audio cable from the AUX port.
2. Cannot play AUX mode & USB Drive Mode at the same time.

EQ Switch

There are 3 EQ modes available on this speaker, Long Press button to switch EQ mode one by one.

TWS- True Wireless Stereo

The speaker supports the TWS feature, which allows the pairing oftwo speakers to sync and play audio simultaneously.

Step 1: Speakers must be disconnected from other Bluetooth devices before TWS pairing.
Step 2: Turn on two speakers and keep them within 50cm. After connected, the suggested distance is 10M.
Step 3: Double press button for any of the two speakers, speakers enter into TWS pairing mode. The first speaker you pressed will prompt tone and will be a master one.
Step 4: Connect Bluetooth. * Refer Bluetooth Connection Operation section.

Note:

1. The speakers will connect together automatically each time after you turn them off and on.
2. Double press button for any of the speakers to disconnect the TWS.
3. Long press button for any of the speakers to disconnect the TWS and Bluetooth at the same time for both speakers.
4. To reconnect TWS mode, turn on both speakers. Set them up from above Step 1.

USB Drive Mode

1. Plug USB Drive into USB port.
2. Press  button to start audio playback.

Note:
Cannot play AUX mode & USB Drive Mode at the same time.

Power Bank

1. Turn on the speaker.
2. Long press button to activate for the power bank function.
3. Plug the USB charging cable into the power bank and connect your device. After charging, long press  to turn off the power bank function.

USB Interface

The device can be charged when it is connected with DC-5V/1A charger via Micro USB/ USB cable.

Charging is possible through: Computer, Power Bank, Car Charger, Wall plug.

Reset Switch

Press reset button with a pin to reset the device.

Microphone

• For better sound quality, please keep the device no more than 30cm away from you.
• Calling from the same room may cause interference in sound quality.

Control Buttons

button
Reject incoming call| Long press      button
AUX Mode| Volume+/Volume-| Press    button
Music play/mute| Press    button
Power bank| Power bank on / off| Long press      button

Indicator Indicator Key

Attention:

• Leaving speaker in the sun/ near heat sources will damage speaker’s battery life.
• IPX6 Rating: Can resist light pressure of water. *Cannot be submerged in water.
• Store speaker at 50% charged is recommended. Do not store it at low power. Cycle the battery from low to max once a month for optimal battery life.
• Loud music may impact hearing loss.

At the end of speaker’s life cycle and warranty period, properly discard speaker according to state law.

Specifications

New Trent Inc.
San Jose, CA USA
Contact us:
https://www.newtrent.com/pages/contact-nt
Note: User guide’s content is subject to change without notice due to improvements on product or manual.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>