heyday KB58 Compact Wireless Keyboard Instruction Manual

heyday KB58 Compact Wireless Keyboard

Product Information

The KQ5+MQZ(2.4G-BT Wireless Keyboard) for Heyday is a compact wireless keyboard that can be connected to a device via wireless USB receiver or Bluetooth. It is powered by 2 AAA batteries and has LED indicators to show the connection channel. The product is FCC compliant and safe for intended operation. It is made in China and has the following dimensions: 8 in x 5.6 in = 203.2 x 142.24mm.

Product Usage Instructions

• Use the arrow keys to switch connection channel between wireless USB receiver and 2 other Bluetooth channels.
• Press the arrow keys once to switch between each channel (the default channel is wireless USB receiver).
• Press and hold “Fn” and short press the arrow keys once to switch between Bluetooth channels. LED indicators will start to flash / light up in green.
• Press and hold “Fn” and “P” long press to switch to Windows.
• Press and hold “Fn” and “I” long press to switch to Mac.

Connect via Wireless USB Receiver

The keyboard is plug and play for USB receiver. Make sure the power is on, plug in the USB receiver into an available USB A port on the device, and set the connection channel on the wireless USB receiver.

Connect / Pair via Bluetooth in Windows

1. Turn on your keyboard and set it on either Bluetooth channel.
2. Click on Start Menu (bottom left corner of your screen).
3. Go to Settings → Device → Bluetooth & other devices.
4. Turn on Bluetooth → Add Bluetooth or other device → Add a device (Bluetooth).
5. Press and hold “Fn” and long press the arrow keys to set the keyboard in pairing mode so that it can be found on your device (its LED will start to flash in green).
6. Click on Heyday compact keyboard to connect / pair (its LED will stop flashing and light up in green and then go off when pairing is completed).

Connect / Pair via Bluetooth in Mac

1. Turn on your keyboard and set it on either Bluetooth channel.
2. Click on Apple menu (top left corner of your screen).
3. Go to System Preferences → Bluetooth → Turn Bluetooth on to set up Bluetooth device.
4. Press and hold “Fn” and long press the arrow keys to set the keyboard in pairing mode so that it can be found on your device (its LED will start to flash in green).
5. Click on Heyday compact keyboard to connect (its LED will stop flashing and light up in green and then go off when pairing is completed).

OVERVIEW

Top

Bottom

Included

• Compact Wireless Keyboard (connect via wireless USB receiver or Bluetooth)
• USB receiver
• 2 x AAA battery

Detailed setup

• This keyboard can be paired with up to 3 different devices
• Use “ ” keys to switch the connection channel between wireless USB receiver and 2 other Bluetooth channels

Press and HOLD “fn” and SHORT

• Press “ ” keys ONCE to switch between each channel (the default channel is “wireless USB receiver”)
• For example, if you are using channel “wireless USB receiver” ( ) and want to switch to channel “Bluetooth Channel 1” (1) to connect with another device, just press and HOLD “fn” and SHORT press “ 1” once to switch it, its LED indicator will start to flash / light up in green, same for switching to “Bluetooth channel 2” (2 ) and “wireless USB receiver” ( )

This keyboard can automatically detect operating systems

• It can automatically detect the operating system (Windows or Mac) on the current device and remap keys to provide functions and shortcuts where you expect them to be
• But if it fails to correctly detect the operating system of a device (incorrect key layout), you can still manually select the operating system by using combination keys below
  • “Fn + P” long press switch to Windows
  • “Fn + I” long press to switch to Mac

Connect via wireless USB receiver

It is plug and play for USB receiver, make sure power is on, plug in USB receiver into available USB A port on device and set connection channel on “wireless USB receiver”

Troubleshooting

• If it is not working, try below steps to re-pair keyboard and USB receiver
• Turn off your keyboard and re-plug in USB receiver, turn on power (make sure channel is set on  )
• Press and HOLD “Fn” and LONG press “
• ” key (keep keyboard close to receiver) If it does not work after 10 seconds, reboot your device and repeat step 1 to 3

Connect/pair via Bluetooth in Windows

• Turn on your keyboard and set it on either Bluetooth channel or Click on Start Menu (bottom left corner of your screen)
• Go to Settings -> Device -> Bluetooth & other devices
• Turn on Bluetooth -> Add Bluetooth or another device -> Add a device (Bluetooth)
• Press and HOLD “Fn” and LONG press key to set the keyboard in pairing mode so that it can be found on your device (its LED will start to flash in green)
• Click on “heyday compact keyboard” to connect/pair (its LED will stop flashing and light up in green and then go off when pairing is completed)

Connect/pair via Bluetooth in Mac

• Turn on your keyboard and set it on either Bluetooth channel
• Click on the Apple menu (top left corner of your screen)
• Go to System Preferences -> Bluetooth -> Turn Bluetooth on to set up the Bluetooth device
• Press and HOLD “Fn” and LONG press key to set the keyboard in pairing mode so that it can be found on your device (its LED will start to flash in green)
• Click on “heyday compact keyboard” to connect (its LED will stop flashing and light up in green and then go off when pairing is completed)

Troubleshooting

• If it is not working, try the below steps to re-setup
• Turn off your keyboard and turn on the power again (make sure the channel is set on )
• Make sure to turn on Bluetooth on your device
• Press and HOLD “Fn” and LONG press key to set the keyboard in pairing mode, make sure it is discoverable on your device and then pair it with your keyboard
• If it does not work after 10 seconds, reboot your device and repeat step 1 to 3

If it is not working on previously paired devices, make sure to turn on Bluetooth on that device and set the keyboard on the correct Bluetooth channel
For example, a tablet has paired with 1, and a laptop has paired with 2
Set the keyboard on if you want to use the keyboard on that tablet

Low battery

If this LED starts to flash, it means you need to change battery

Function keys

Press F1 ~ F12 as standard function keys

Project Name : KS0(2.4G-BT Wireless Keyboard) For Heyday Instructions Manual_Outline_20220422.ai
REV. A
DATE : 2022.04.22

Need some help?

Can’t get it to pair? Just have a question?

call us at: 877-698-4883 online at: TargetTechSupport.com

Safety

• Do not use near any water source
• Do not modify or repair this device
• Do not use in high temperatures or extreme weather
• Do not use chemical detergents to clean your device, use a soft dry cloth

FCC

FCC ID: PRDKB58 Model: KQ5-WG DPCI: 056-00-0064
Input : 3V 50mA Made in CHINA

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and 2) this device must accept interference received, including interference that may cause undesired operation.
   Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
   However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

TargetCorp. Mpls. MN, 55403 Phone: 1-612-304-6073

Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE : Do not mix old and new batteries and do not mix alkaline, standard (zinc-carbon) or rechargeable (nicad, NiMH, etc.) batteries.
Battery life may vary depending on user and computing conditions.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>