heyday KSR-BW Compact Wireless Keyboard Instruction Manual

KSR
for heyday Instructions Manual
Size: 8 in x 5.6 in = 203.2 x 142.24mm
4in = 101.6mm

KSR-BW Compact Wireless Keyboard

Bluetooth channel 1
Bluetooth channel 2

bottom

included

• Compact Wireless Keyboard (connect via wireless USB receiver or Bluetooth)
• USB receiver
• 2 x AAA batteries

cover

connect / pair via Bluetooth in Mac

1. Turn on your keyboard and set it on either Bluetooth channel or

2. Click on Apple menu (top left corner of your screen)
   Go to System Preferences -> Bluetooth -> Turn Bluetooth on to set up Bluetooth device

3. Press and HOLD “Fn” and LONG press “ or ” key to set keyboard in pairing mode so that it can be found on you device (its LED will start to flash in green for   and in red for )

4. Click on “heyday compact kb” to connect (its LED will stop flashing and light up in green for and in red for and then go to when pairing is completed)

Troubleshooting

If it is not working, try below steps to re setup

1. Turn off your keyboard and turn on power again (make sure channel is set on or )
2. Make sure to turn on Bluetooth on your device
3. Press and HOLD “Fn” and LONG press “ or  ” key to set keyboard in pairing mode, make sure it is discoverable on your device and then pair with your keyboard
4. If it does not work after 10 seconds, reboot your device and repeat step 1 to 3

If it is not working on previous paired devices, make sure to turn on Bluetooth on that device and set keyboard on correct Bluetooth channel
For example, a tablet has paired with , and a laptop has paired with Set keyboard on if you want to use keyboard on that tablet

low battery
If this LED starts to flash in red, it means you need to change battery

Function keys

Press and hold Fn + F1 ~ F12 as shortcut function keys

| Switch to Bluetooth channel 1 / device 1| | Decrease the device’s volume
| Switch to Bluetooth channel 2 / device 2| | Increase the device’s volume
| Switch to wireless USB receiver channel / device| | Mutes (turns off) the device’s sound
| Decrease display brightness| | Homepage
| Increase display brightness| | Insert
| Play media or pause current media track| | Print Screen

Press F1 ~ F12 as standard function keys

back cover

detailed setup

• This keyboard can be paired with up to 3 different devices
  Use keys to switch connection channel between wireless USB receiver and 2 other Bluetooth channels

• Press and HOLD “fn” and SHORT press keys ONCE to switch between each channel (the default channel is “wireless USB receiver”)
  For example, if you are using channel “wireless USB receiver” ( ) and want to switch to channel “Bluetooth Channel 1” ( ) to connect with another device, just press and HOLD “fn” and SHORT press “ ” once to switch it, its LED indicator will start to flash / light up in green, same for switching to “Bluetooth channel 2” ( ) its LED indicator will start to flash/light up in red and “wireless USB receiver”its LED indicator will start to flash/light up in green ( )

• This keyboard can automatically detect operating systems
  It can automatically detect the operating system (Windows or Mac) on the current device and remap keys to provide functions and shortcuts where you expect them to be But if it fails to correctly detect the operating system of a device (incorrect key layout), you can still manually select the operating system by using combination keys below
  connect via wireless USB receiver“Fn + P” long press switch to Windows| “Fn + I” long press to switch to Mac
  ---|---

• It is plug and play for USB receiver, make sure power is on, plug in USB receiver into available USB A port on device and set connection channel on “wireless USB receiver”

Troubleshooting

If it is not working, try below steps to re-pair keyboard and USB receiver

1. Turn off your keyboard and re-plug in USB receiver, turn on power (make sure channel is set on )
2. Press and HOLD “Fn” and LONG press “ ” key (keep keyboard close to receiver)
3. If it does not work after 10 seconds, reboot your device and repeat step 1 to 3

connect / pair via Bluetooth in Windows

1. Turn on your keyboard and set it on either Bluetooth channel or

2. Click on Start Menu (bottom left corner of your screen)
   Go to Settings -> Device -> Bluetooth & other devices
   Turn on Bluetooth -> Add Bluetooth or other device -> Add a device (Bluetooth)

3. Press and HOLD “Fn” and LONG press “ or ” key to set keyboard in pairing mode so that it can be found on your device (its LED will start to flash in green for and in red for )

4. Click on “heyday compact kb” to connect / pair (its LED will stop flashing and light up in green for and in red for  and then go off when pairing is completed )

need some help?
Can’t get it to pair? Just have a question?

call us at: 1-833-TGT-Tech.

safety

• Do not use near any water source
• Do not modify or repair this device
• Do not use in high temperatures or extreme weather
• Do not use chemical detergents to clean your device, use a soft dry cloth

heyday
FCC ID: PRDKB63
Model: KSR-BW DPCI: 056-00-0096 / Model: KSR-DC DPCI: 056-00-7011
Model: KSR-JA DPCI: 056-00-8487
Input: 3V 50mA Made in CHINA
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

TargetCorp. Mpls. MN, 55403 Phone: 1-612-304-6073
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: Do not mix old and new batteries and do not mix alkaline, standard (zinc-carbon) or rechargeable (nicad, NiMH, etc.) batteries.
Battery life may vary depending on user and computing conditions.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>