Fujian CX-9003 LED Ceiling Lamp Instructions
- September 12, 2024
- FUJIAN
Table of Contents
Fujian CX-9003 LED Ceiling Lamp
OVERVIEW
Scan the following two-dimensional code Downloadthe Smart Light Control APP
Support for IOS and Android
APP pairing method with lamps
- Apple or Android/Huawei mobile phones can be automatically downloaded and installed by scanning the two-dimensional code on the user manual.
- Apple Phone can be downloaded directly by entering APP STORE and searching for Zhijia Light Control.
- Android phones can be downloaded directly by entering the app market to search for Zhijia lamp control.
- Huawei mobile pphonescan be directly downloaded by entering the application Bao search Zhijia light control.
REMOTE CONTROL
- Press this key in 10 seconds after the lamp has just been powered on
- The lamp is powered on, and the SETUP key on the remote control is pressed quickly in 10 seconds, and the light flashes to indicate the success of the code. Otherwise, turn off the total power supply of the lamp, and then repeat this step until the light flashes and the code is successful.
- Press or click this key for a long time, and the brightness increases.
- Press or click this key for a long time, and the brightness is dimmed.
- Press this key for a long time, and the color temperature will increase the color of the light and tu
- Long press this key, color temperature drops, with light color warming.
- Press this key to change the lamp to warm light (3300K)
- Press this key to turn the lamp into white (6500K)
- Click this key, the lamp color temperature in the white light warm light, and neutral light switch.
- Press this key, and the lamp switches between full power and half power, and the color temperature of the lamp is neutral.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits : FCC approved
- Minimum Distance : 0cm between radiator and body
Product Usage Instructions
Safety Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 0cm between the radiator and your body.
FAQ
Q: Can I modify the device?
A: No, any changes or modifications not approved by the manufacturer may
void your authority to operate the equipment.
Q: What are the compliance conditions for operation?
A: The device must not cause harmful interference and must accept any
interference received.
Q: What is the recommended distance between the radiator and the body?
A: The equipment should be installed and operated with a minimum distance
of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>