Dualit Conveyor Thermal Protection Toaster Instructions

Dualit Conveyor Thermal Protection Toaster

Product Information

The Dualit Conveyor Toaster is a high-quality toaster equipped with a Thermal Protection Device. This device is designed to safeguard both the product and the user in case of a thermal overheating. It ensures the toaster’s safe operation by activating under two conditions:

1. Insufficient ventilation surrounding the product. It is crucial to always follow the Set Up procedure outlined in the Instruction Book to prevent this issue.
2. A fault with the product itself.

If you notice that the toaster’s red POWER light is not illuminating, the belt is not turning, and the elements are not heating, it is possible that the Thermal Protection Device has been activated.

Product Usage Instructions

To troubleshoot this issue, please follow these steps:

1. First, check the Plug Fuse and replace it if necessary.
2. If the toaster’s red POWER light still does not illuminate, you will need to reset the Thermal Protection Device.

How to Reset the Thermal Protection Device

IMPORTANT: Before packing the product for return to Dualit, you must remove the legs of the toaster. Failure to do so may result in damage to your toaster, which is not covered by your warranty. If you are unsure about the best way to package your toaster or have any questions regarding the information provided above, please contact Dualit customer services. For the latest instructions and further assistance, you can visit the Dualit website by following this link: Dualit ConveyorToasters.

Your Dualit Conveyor Toaster is fitted with a Thermal Protection Device. This is intended to protect the product and user in the event of a thermal overheat. The Thermal Protection Device will activate if:

1. There is insufficient ventilation surrounding the product. Warning: Always follow the Set Up procedure in the Instruction Book.
2. There is a fault with the product.

If you find that your toaster’s red “POWER” light is not illuminating, the belt is not turning and the elements are not heating, the Thermal Protection Device may have activated. First, check the Plug Fuse and replace if necessary. If the toaster’s red “POWER” light is still not illuminating, you need to reset the Thermal Protection Device.
How to Reset the Thermal Protection Device:

• Turn off and unplug the toaster. Allow to cool for 1hr. Risk of electrocution and burns
• Locate the Reset Button that is situated on the underside of the toaster on the left-hand side. You can identify the location by the marking that says “Thermal Protection Device Reset Under Here”.
• Remove the Crumb Tray and lay the toaster on its right-hand side, onto a cloth to protect the surfaces, to gain access to the reset button. Warning: Take care not to pull or knock the legs when turning the product over. Damage may occur.
• You can use the end of a pen to press the reset button, situated within the hole as shown in the diagram below.
• Once reset, ensure the toaster is set up and set back on its legs. Ensure you have positioned it correctly within its environment (see the Set Up section of the Instruction Book) and plug in. A fire may occur if incorrectly positioned.
• Turn the Control Dial to TOAST.
• If the red light still does not illuminate even when the belt is turning, you will need to return the toaster to Dualit. Please contact customer services on 01293 652500.
• If the red light is illuminated, allow the Toaster to heat up for 15 minutes. If the green “READY” light does not illuminate, then there is a fault with the internal control system of the toaster; you will need to return it to Dualit. Please contact customer services on 01293 652500.
• If you find that the Thermal Protection Device has to be reset again, or there is a fault with the Toaster Thermostat; you will need to return it to Dualit. Please contact customer services on 01293 652500.

IMPORTANT: The legs of the toaster MUST be removed prior to packing the product ready for return to Dualit. Failure to do with will result in damage to your toaster, which is not covered by your warranty. If in doubt on the best way to package your toaster or any of the information above, contact Dualit customer services.
Follow this link for the latest instructions on Dualit Website: https://www.dualit.com/conveyor-toasters.
Please Read – Important Information Regarding the Thermal Protection Device

References

• DCT2i Dualit DCT2i 2 Slice Conveyor Toaster - Conveyor Toasters by Dualit – Dualit Website
• DCT2i Dualit DCT2i 2 Slice Conveyor Toaster - Conveyor Toasters by Dualit – Dualit Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>