FUJIAN WT-9008 Massage Chair Instruction Manual
- June 5, 2024
- FUJIAN
Table of Contents
- FUJIAN WT-9008 Massage Chair
- IMPORTANT SAFETY INSTRUCTIONS
- GROUNDING INSTRUCTIONS
- INSTALLATIONS GUIDE
- FUNCTION OF EACH PART
- MOVING THE MASSAGE CHAIR
- CHAIR PLACEMENT
- CONTROLLER PANEL
- HOW TO USE
- SAFETY INSTRUCTIONS
- DAILY CARE AND MAINTENANCE
- TROUBLESHOOTING
- SPECIFICATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FUJIAN WT-9008 Massage Chair
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using {this appliance).
- Never use pins or other metallic fasteners with this appliance.
- Carefully examine the covering before each use. Discard the appliance if the covering shows any sign of deterioration, such as checking, blistering, or cracking.
- WARNING –To reduce the risks of burns, fire, electric shock or injury to persons:
- An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
- Close supervision is necessary when this appliance is used by, on, or near children, or disabled
- persons. Use this appliance only for its intended use as described in this manual. Do not use attachments that have not been recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
- Do not carry this appliance by the supply cord or use the cord as a handle.
- Keep the cord away from heated surfaces.
- Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the off position, then remove plug from outlet.
- Keep children away from the extended foot support. Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
- Use heated surfaces carefully. May cause serious burns. Do not use over insensitive skin areas or in the presence of poor circulation. The unsupervised use of heat by children or disabled persons may be dangerous.
- Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Danger-Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
OPERATING SURROUNDINGS
- Do not use or store the massage chair in a damp environment : i. e. bathroom, sauna, spa to avoid any mold, electric shock, fire or mechanical failure.
- Do not use the massage chair outdoors
- Do not use the massage chair under dusty, smeary, or anoxic conditions
- Do not place the massage chair near a heater, stove, or near sunlight radiation to avoid inner components overheating and causing fire
- Make sure to place the massage chair on a flat level ground
- The bracket part should be placed on the plain ground
- To avoid electric shock, please make sure to connect an earth wire and have it grounded.
- Don’t use the machine while smoking
FOLLOWING CONDIDONS SHOULD CONSULT DOCTORS BEFORE USE
- Suffered from malignant tumor
- Serious heart disease
- Serious skin disease
- Serious boned hyperplasia
- During Pregnancy
- Be on the rest cure under the doctor’s supervision
- If there is a bend in the back caused by an accident or disease
- Needing peaceful surroundings
- Arthritis Disease
- Implanted pacemaker for medical purpose
- Suffered from bowels disease (i.e. gastritis, entritis, diarrhea, hepatitis)
- Serious blood circulation trouble
- Consciousness trouble
- In hyperpyretic
WARNING
Children under the age of 18 or people with disabilities (physical and
mental) are not allowed to operate the massage chair without a doctors consent
to prevent cases of electric shock, injuries, or mechanism malfunctions.
For safety reasons and i1 order to clearly indicate potential dangers should the product be used improperly, instructions have been marked i1 the following manners and should be strictly noted.
CAUTIONS
- Do not spray or directly pour liquids to the switch when cleaning to avoid insolation fault, electrical shock or short-circuiting.
- When moving the chair in the process of storing or maintenance, be sure to disconnect the power plug from socket
- Do not detach the plug with wet hands
- Make sure to shut off and detach the power plug when cleaning or storing product
- During cleaning or moving the machine, make sure to detach power cord to avoid fire or electrical shock
- Do not place the machine onto an unstable surface to avoid roasting, insulation failure, electrical shock or turnover
- When storing the machine, make sure to disconnect power plug to avoid fire caused by electricity leaking
- Clean power plug periodically to avoid fire due to dust
- Do not use it in any unsafe places or for other purposes
- It is the main reason of product damage or accident
- Do not store the machine onto an unstable surface
- Unexpected earthquake or external force will cause damage or injury
- Keep supply cord unobstructed at all time, i.e. not twisted, knotted, over flexed or pulled and do not place anything heavy on it
- The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
- Do not modify the structure or change components by unauthorized person not dismantle the machine by unauthorized person to avoid electrical shock, short-curcuit or fire
- Do not store it near a fire or flamable substances
- It is one of the reasons of causing product manipulation, deviation, or damage
- Should any abnormality occur(i.e. scorching smell), stop using immediately and detach power plug from socket
- Operating under an abnormal situation will cause fire or electrical shock, please contact your local seller or authorized service agent for maintenance
- Do not place the machine onto an unstable surface to avoid roast, insulation failure, electrical shock or turnover
- Only rated voltage must be used
- Stop using immediately if supply cord or power plug be damaged or loosen
- Be sure to keep children away during operating to avoid any hazard
- Do not explore it under sunshine at all time
INSTALLATIONS GUIDE
Legrest Installation
-
In order to install the footrest make sure that the connecting axis points of the footrest lines up with the seat base as shown in the diagram below. Once aligned tighten the
“fixed screw”. An Install video will be available online for more detailed instructions. Once completed connect the electrical wire and air pipe as shown in the left illustration. -
As a final step make sure the air hose is not bent or twisted anywhere before zippering up the seat cushion to the legrest.
FUNCTION OF EACH PART
MOVING THE MASSAGE CHAIR
Method 1: Using Casters
- When moving the chair, one person should tilt the back and the other lift up thefootrest to 45 degrees. Then push the chair forward via casters.
- The back should not be reclined too low in case of the chair falling down and causing damage and harm to property or persons.
Method 2: Lift up by two persons and move the chair
- Please grasp the bottom of the side plate (not the base) with your hands and lift it up.
- Due to the heavy weight, the chair must be carried by two or more people. Also please be careful when handling to avoid back strain.
Attention
- Do not drag or push the chair when it is not installed.
- Do not hold the plastic parts of the foot cover and power box for moving. Otherwise, it is easy to cause machine failure or personal injury.
- Do not move the chair when someone is seated. Otherwise, it may cause malfunction or personal injury.
- Before moving the machine, please turn off the chair (backrest & footrest will go back to original position) and unplug the power cord. Otherwise, it may cause malfunction or personal injury.
- It is recommended to lay a cushion on the floor in case of scratching by casters when
CHAIR PLACEMENT
- When placing your massage chair, be sure to leave 6 in. of space between the chair back and wall to allow it to recline safely.
- When using the massage chair, ensure there are no people, pets, or objects within 20 in. of the chair to allow the footrest to extend safely.
Attention
- Do not use in places with high humidity such as bathrooms or saunas.
- Please use on a flat and non-slippery ground.
- Do not use in a place with a lot of debris or dust, or a place with high surrounding temperature (above 40°C).
- Do not place the unit under direct sunlight or near high-temperature places such as heating appliances.
- Do not let flames such as cigarettes near the massage chair.
Connecting the power cord
-
Insert the power cord into the chair’ s power socket, then plug the cord into a grounded wall outlet.
-
Turn the power switch to the ON (I) position.
CONTROLLER PANEL
Bluetooth & Music Function
Open your mobile device Bluetooth function and pair with the chair Bluetooth
code “OSAXXXX” or “BK8000L” , then you could play the music via speakers.
Note:
- The connecting password for Bluetooth is “9999” if there is. The default setting is without password.
- The Bluetooth speaker could only connect with one Bluetooth device at a time. Please turn off your Bluetooth device so others could enjoy it as well.
HOW TO USE
Turning On the Massage Chair
First, be sure the power switch on the power box is in the off” O” position.
Then insert the power cable into the port of socket on the left to the switch.
Once firmly plugged in, proceed to plug the power cord into the outlet. Then
flip the switch to the on “I” position, and the remote should light up.
warning: Do not insert or pull out the power plug with wet hands, otherwise an electric shock would happen.
Starting Your Massage
Sit in the chair, then press the power button of controller panel and select a
massage.
Automatic Massage Program Introduction
Operation method:
- Press the home page key on controller panel to return the main menu.
- Press key to select Auto program menu, then choose the Auto program to start. The back rollers will detect shoulder position automatically. When you hear “Beeping” , the detection is finished, at this moment it allows to press up or down key to adjust a more accurate shoulder position as you need, then press key to start massage.
- Lumbar heating: Press key to start heating. Press again to close.
- Foot rollers: Press to start foot rolling massage. Press again to close
- 4D function adjustment: Press to adjust the 4D roller strength. There are total 5 levels adjustments
Automatic course
Automatic massage programs including the following massages. Each program massage different locations: Kneading finger, pressing, beating, soft hammer, and pressure.
Automatic course
Massage strength adjustment
In massage status page, press the key to the massage strength page
Massage angle adjustment
In massage status page, press the key to the massage angle adjustment page.
Note : Press the key once to start, press again to stop.
Pause or stop the massage
- Auto off: The massage chair will stop working automatically after 15 minutes. All auto programs timer is 15 minutes in default setting.
- Forced stop: Press the key once, the massage chair will stop working. Press the key to re-start massage.
- End the massage: In the massage status page, press the key to end the massage.
Settings function
Introduction of settings key function Operation method:
- Press home page key to return main menu
- Press key to choose “settings” option. There are Language, Backlight, Touch-tone, Sleep time, and etc.
SAFETY INSTRUCTIONS
- Should any abnormality occur, shut off and detach power plug from socket.
- When the power cord is damaged, it must be changed from a special power cord available from the manufacturer or the service department.
DAILY CARE AND MAINTENANCE
Storage guide
- not dismantle back of the chair. Electrical shock may happen when in touch with the inner elements of chair.
- An unauthorized person must not dismantle the chair to avoid electric shock or fire.
- Make sure to shut off and detach the power plug when cleaning to avoid electric shock or hazard. © Keep the massage chair clean and free of dust. [x) not place the massage chair in a damp environment.
- If not il use for a long period, please cover it with a cloth to free dust.
- not place the massage chair under sunlight.
Maintenance
- Use neutral detergents only
- Use neutral detergents to clean the back cushion, head cushion, and leg cushion. Let it dry.
- Use detergent and cloth to clean the plastic, pipe and leather material of massage chair.
- Make sure not to use organic solvents as gasoline, amyl acetate, benzene for cleaning to avoid fading of the color, aging, or breakage.
- not spray pesticide to avoid electric shock or fire.
- Please clean with dry cloth to avoid mechanical failure.
Controller maintenance
- not place the massage chair near heat or fire.
- Keep away from dampness to avoid electric shock.
- Please clean dust with a soft cloth or a small banister brush.
- Make sure not to use violent detergent such as benzene, gasoline, amyl acetate.
TROUBLESHOOTING
Checking is necessary in frequent usage. Make sure the machine work properly before usage, after not in use for long time.
Abnormality situation | Solution guide |
---|---|
Failure to start and indicator light is off |
© Check that the plug is well connected
© Check if the switch on the chair is turned to “I” position
Sound in operation
|
The sound is normal in following situation
©Sound for kneading or knocking
©Sound changes after speed adjustment
©Sound from the box in massage
©Vibration sound for backrest in massage
©Sound for air input and output
©Sound for airbag inflating and venting
©Sound for leg adjustment
©Sound for motor when the massage chair is loaded
SPECIFICATION
Product name | Massage Chair |
---|---|
Model | YH-9911 |
Power supply | AC 100-240V |
Rated power | 150W |
Rated working time | 15 min |