LIVINOX LCH-601A Series Range Hood User Manual

: September 12, 2024
: LIVINOX

Table of Contents

LCH-601A Series Range Hood
Product Specifications
Product Usage Instructions
1. Safety Instructions
2. Installation
3. Product Usage

LCH-601A Series Range Hood

“`html

Product Specifications

Model: LCH-601A-60SS / LCH-601A-90BL / SS
Speed Control: 3 or 4 speed mechanical/electronic controls
Intended Use: Household use only

Product Usage Instructions

1. Safety Instructions

Warning: Please read this section thoroughly
before attempting to operate the appliance.

Ensure adequate ventilation in the room when using the range
hood simultaneously with gas/fuel burning cooking appliances.
Adequate air is needed for proper exhausting of gases through
the flue (chimney) of fuel burning appliances.
This appliance is not intended for use by persons with reduced
physical, sensory, or mental capabilities.
Do not vent exhaust air into enclosed spaces within walls,
ceilings, attics, or crawl spaces.

2. Installation

Installation and repairs must be done by a qualified
technician.
Do not modify any part of the appliance yourself.
Ensure good and permanent ventilation in the installation
location.
In ducted mode, ensure there is at least one permanent air
inlet and do not discharge air into ducts used for other
appliances.
Maintain a distance of at least 60cm between the bench and the
lower part of the hood.
Use the correct electrical connector with earth suitable for
your location.

3. Product Usage

The hood is equipped with a speed control feature:

Low speed for simmering
Medium speed for light cooking
High speed for frying or heavy cooking

Frequently Asked Questions (FAQ)

Q: Can this product be used in commercial applications?

A: No, this product is designed for household use only and
should not be used for commercial purposes.

Q: What should I do if the electrical cord is damaged?

A: If the electrical cord is damaged, it must be replaced by the
manufacturer, its service agent, or a qualified electrician.

“`

User Manual
LCH-601A-60SS /LCH-601A-90BL /SS
1

From the Manufacturer
Please read this user manual carefully before attempting to operate the appliance and keep it in a safe place for future reference. This appliance and its packaging are produced by processes that minimize waste and respect the environment. Please help us to continue this effort to protect the environment by using the appliance efficiently and dispose of the packaging in a responsible manner.
FOR THE USER
1. Safety Instruction
Warning
PLEASE READ THIS SECTION THOROUGHLY BEFORE ATTEMPTING TO OPERATE THE APPLIANCE
1.To ensure adequate ventilation in the room when the range hood is in use at the same time as gas/fuel burning cooking appliances (this is not applicable to appliances that only discharge the air back into the room).
2.There is a fire risk if cleaning is not carried out in accordance with the instructions. 3.To avoid using food products that produce flame under the range hood. 4.Do not “flambé” food (is a cooking procedure in which alcohol is added to a hot pan to create a burst of flames)
under the range hood. 5.Sufficient air is needed for proper exhausting of gases through flue (chimney) of fuel burning appliances. 6.This appliance is not intended for use by persons (including children) with reduced physical, sensory, mental
capabilities, lack of experience and knowledge. 7.To reduce risk of fire and to properly exhaust air and to ensure to duct air outside. Do not vent exhaust air into
spaces within walls, ceilings, into attics and crawl spaces.
Electrical Cord
1.To ensure the electrical cord is not exposed to heat, chemical or sharp objects. 2.If the electrical cord is damaged, it must be replaced by the manufacturer or its service agent or qualified
electrician.
Installation
1. This appliance must be installed or repaired by a qualified technician only. 2. Do not modify any part of this appliance by yourself. 3. To ensure the location in which this appliance is installed has good and permanent ventilation. 4. In ducted mode, there must be one or more permanent air inlet. The air collected must not be discharged into
a duct used to blow off smoke from other appliances fed with electricity. 5. The distance between the bench to the lower part of the hood must not be less than 60cm. 6. Use an electrical connector with earth that is correct for your location. 7. To check the voltage in your area correspond to the appliance as indicated on the rating label. 8. Do not connect the hood to a duct that carries combustion fumes (e.g. fireplace).
Intended For Household Use
1.This product is designed for household use only and should never be used for commercial applications. 2.After use, always ensure that all controls are in the “OFF” position. 3.When frying with a gas flame, take particular care not to allow the oil or grease in the pan to catch fire.
2

Cleaning, Maintenance & Service It is very important to clean and maintain the grease filters regularly (at least once monthly) to improve its efficiency in eliminating heat and contaminated air in the kitchen. Heavy oil deposits is a fire hazard. Hood surface should be cleaned with soft cloth and non-corrosive detergent. Important: Never attempt to repair this appliance by yourself. Always refer to qualified Service Technicians. For safety precaution, always purchase the original replacement parts. Always switch off the power and unplug the connection before conducting maintenance or cleaning.
2. Hood Description
Ducted or Re-circulating mode Depending on your requirement, this appliance can be configured to operate in the ducted or re-circulating modes. DUCTED MODE: Fire proof ducting system of 120mm or 180mm diameter vent the fumes through a suitable outlet. In the ducted mode, only the aluminum grease filters are installed. RECIRCULATING MODE: Fumes are filtered for grease and odour through the aluminum grease filters and the charcoal filters respectively and re-introduced into the kitchen environment. In re-circulating mode, both the aluminum grease filters and the charcoal filters should be installed.
Speed Control 1. The hood is equipped with a 3 or 4 speed mechanical/electronic controls. 2. To use the low speed for simmering, medium speed for light cooking. To use the high speed for frying or heavy cooking.
3

3. Dimension Diagrams
LCH-601A-60SS
LCH-601A-90SS/LCH-601A-90BL
4

4. Instructions for use
A.Push Button Control Panel (LCH-601A-60SS/LCH-601A-90SS/LCH-601A-90BL)

A

B

C

D

E

1.Press A, turn on the light. Press it again, turn off the light. 2.Press B, the fan runs at low speed. Press C or Press D to change the Fan Speed. Press E, the fan turns off. 3.Press C, the fan runs at mid speed. Press B or Press D to change the Fan Speed. Press E, the fan turns off. 4.Press D, the fan runs at high speed. Press B or Press C to change the Fan Speed. Press E, the fan turns off. 5.Press E, turn off the speed control when the Fan is on.

Cleaning & Maintenance
ALWAYS SWITCH OFF AND UNPLUG FIRST! SURFACES: Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance as this will cause irreparable damage. ALUMNIUM GREASE FILTERS: Wash in the dishwashers or soak the panels in a degreasing agent for an hour, then rinse off and dry before reinstalling. CHARCOAL FILTERS:(optional and not included in package) (only in re- circulating model): Charcoal cannot be reused. They must be replaced with the appropriate types once a year or depending on the frequency of appliance usage. For this appliance to function effectively, regular maintenance is a must. Clogged filters restrict airflow and may cause the motor to overheat.
5. Installation
1. Use suitable bolts to mount the appliance on a secure surface. 2. The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest
part of the range hood. When the range hood is located above a gas appliance, this distance shall be at least 65 cm. If the instructions for installation for the gas hob specify a greater distance, this has to be taken into consideration. 3. The location of the installation must have permanent openings for ventilation. 4. Regulations concerning the discharge of air have to be fulfilled.
5

5. It is strongly recommended that the hood to be installed right over the exhaust air from cooking. 6. Do not install the outlet of the pipe in the wind direction, which can prevent the exhaust air from flowing
backward. 7. To fasten the components for the exhaust outlet with screws. To ensure good ejection of exhaust air, the
pipe must not be bended for too many times. Step 1: 1. To install onto the wall drill 2 holes of Ø8mm on a suitable place according with the centre distance
of hole in the back of the cooker hood. 2. To insert the nut into the holes. 3. To insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws. 4. To fix the cooker hood with safety screw. The two safety vents are positioned on the back casing,
with diameter of 6mm. 5. To put the one-way valve onto the cooker hood.
(LCH-601A-60SS/LCH-601A-90SS/LCH-601A-90BL)
(LCH-920-76BL/LCH-920-90BL)
6

(LCH-627-75B/LCH-627-90B)
Step 2: 7

1. To drill 4 holes of 6mm diameter at the bottom of the hanging cupboard. 2. To put the one-way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 4 screws. 3. To install the adjusted board on the bottom of the hood in order to keep out the gap between hood
rear and cupboard. (LCH-601A-60SS/LCH-601A-90SS/LCH-601A-90BL)
(LCH-920-76BL/LCH-920-90BL)
(LCH-627-75B/LCH-627-90B) 8

Notes: 1. The extended pipe is an optional accessory, not included. 2. To take off the protection film before installation. 3. There are 2 methods for ventilation, ‘ horizontal ventilation’ and ‘ vertical ventilation’. Please pay
attention to the ventilation method during installation. Vertical ventilation: See Pic A, please use tool to remove the round cover before installing, the air can be vented from top. Horizontal ventilation: See Pic B, please use tool to remove the round cover before installing, the air can be vented from back. 4. The square air outlet for horizontal ventilation is not supplied.
9

Air ventilation setting Outdoor exhausting: Turn the adjuster to outdoor position(pic.7A), install the outlet, turn on the cooker hood, then the air will be vented from the outside outlet. Recycling: the recycling mode with carbon filter ,Turn the adjuster to indoor position (pic.7B), install the outlet cover, turn on the cooker hood, then the air can be vented from the inside outlet. See Pic 7D Note: The charcoal filter is mounted on the back of the grill and must be changed once in every three month. Warning: the charcoal cannot be washed or recycled. It should be changed at most after 120 hours using. The carbon filter shouldn’t be exposed to heat.
The four hob elements were used the appliance at most. Every hood has too fixing screws to firmly fix the hood in its place.
Installation (Vent inside) 10

If you do not have an outlet to the outside, exhaust pipe is not required and the installation is similar to the one show in section “Installation (Vent outside)”.
Activated carbon filter can be used to trap odors. In order to install the activated carbon filter, the grease filter should be detached first. Press the lock and pull it downward.
Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.
FOR THE INSTALLER
11

6. Safety Information
1. Electrical connection must be in accordance with the local standards and laws. 2. To ensure that the electrical supply in compliance with the appliance setting, otherwise, do not
connect. 3. To ensure the power supply cord is free from any heat source or sharp objects. 4. The electrical connection of this appliance must be soundly earthed. In the event of electrical short
circuit, grounding reduces the risk of electrical shock. If unsure, contact a qualified electrician. 5. Replacement of lamp must not exceed 20W. 6. LED lamp must not exceed 1.5W/7W.
Wire Color Codes: Green & Yellow = EARTH Blue = NEUTRAL Brown = LIVE
7. Trouble shooting
12

Problems Not function

Possible Cause No power supply

Action Check that the main switch is turned on
Check that the plug is connected

Poor airflow

Aluminum grease filters clogged Clean the filters and replace when dry Charcoal grease filters clogged Replace charcoal filters with new sets

Motor running but no airflow

Butterfly valve jammed

Contact technician

Motor cuts after a few minutes

High temperature safety device The kitchen is not sufficiently

activated

ventilated