Arctic Bracing Arctic_7 ASO Universal Wrist Brace User Guide
- September 12, 2024
- Arctic Bracing
Table of Contents
Arctic_7 ASO Universal Wrist Brace
“`html
Product Information
Specifications:
- Product Name: Universal Wrist Brace
- Brand: Arctic Bracing
- Intended Use: Restrict motion of the wrist and/or thumb
Product Usage Instructions
Description of Parts:
- Dorsal Stay Pull Tab
Instructions:
-
Step 1: Unfasten all straps.
-
Step 2: Slide the brace onto the hand with the
thumb part aligned on the side of the device. -
Step 3: Insert the thumb into the thumb guide
provided. -
Step 4: Remove and reposition the dorsal stay
to align it with the middle of the hand/finger joint. Tighten the
thumb part while keeping the thumb end joint movable. -
Step 5: Pull the Quick-Pull closure strap to
tighten laces. -
Step 6: Fasten the strap on the ulnar side to
secure the wrist. Wrap strap around the device and secure the hook
and loop closure. -
Step 7: The palmar and thumb stay can be
removed from the device to customize for wrist and thumb
contours.
Cleaning and Care:
Follow instructions on PAGE 4 of the user manual for cleaning
and care guidelines.
FAQ
Q: How should I clean the Universal Wrist Brace?
A: Refer to PAGE 4 of the user manual for detailed cleaning and
care instructions.
“`
Universal Wrist Brace
USER GUIDE
Arctic Bracing
Intended Use
The device is intended to restrict motion of the wrist and/or thumb.
Arctic Bracing
Indications for Use
For conditions that may benefit from restricting motion of the wrist, such as:
·Mild to severe sprains and strairis. · Tendonitis. ·Post-cast healing. ·Other
selected soft ussue injuries.
Arctic Bracing
Description of Parts
PAGE 1
Dorsal Stay Pull Tab
Arctic Bracing
Instructions
STEP 1
STEP 2
Unfasten all straps.
STEP 3
Slide onto the hand. Be sure the thumb part on the side of the device is
aligned
STEP 4
Insert the thumb into the thumb guide provided
Remove and reposition the dorsal stay. Align the
on the brace until it encloses the metacarpophalangeal dorsal stay with the middle of the hand/finger
joint. Tighten the thumb part. The thumb end joint
remains freely movable
PAGE 2
STEP 5
STEP 6
Pull Quick-Pull closure strap to tighten laces.
Fasten the strap on the ulnar side to secure the
Wrap strap around device and secure the hook and wrist
loop closure
STEP 7
The palmar and thumb stay can be removed from the device in order to bend to suit the contours of your wrist and thumb. To do this, pull the stay out of the pocket on the underside of the device
PAGE 3
Arctic Bracing
Cleaning and Care
·Hand-wash using mild detergent and rinse thoroughly. · Air dry. ·Do not
machine wash, tumble dry, iron, bleach, or wash with fabric soffener. ·Avoid
contact wilh salt water or chlorinated water. in case of contact, rinse with
fresh water and air dry.
PAGE 4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>