Arctic Bracing Universal Thumb and Wrist Orthosis User Guide
- September 12, 2024
- Arctic Bracing
Table of Contents
Universal Thumb and Wrist Orthosis
“`html
Product Information
Specifications
- Product Name: Universal Wrist and Thumb Orthosis
- Brand: Arctic Bracing
- Intended Use: Restrict motion of the wrist and/or thumb
Product Usage Instructions
Description of Parts:
– Dorsal Stay Pull Tab
Instructions:
-
STEP 1: Unfasten all straps.
-
STEP 2: Slide onto the hand. Ensure the thumb
part on the side of the device is aligned. -
STEP 3: Insert the thumb into the thumb guide
provided. -
STEP 4: Remove and reposition the dorsal stay
to align with the middle of the hand/finger joint. Tighten the
thumb part. The thumb end joint remains movable. -
STEP 5: Pull Quick-Pull closure strap to
tighten laces. -
STEP 6: Fasten the strap on the ulnar side to
secure the device. Wrap strap around and secure the hook and loop
closure. -
STEP 7: The palmar and thumb stay can be
removed from the device to bend to suit wrist and thumb contours.
Pull the stay out of the pocket on the underside of the
device.
Cleaning and Care:
– Refer to PAGE 4 for cleaning and care instructions.
FAQ
Q: How should I clean the Universal Wrist and Thumb
Orthosis?
A: Please refer to PAGE 4 of the user manual for detailed
cleaning and care instructions.
“`
Universal Wrist and Thumb Orthosis
USER GUIDE
Arctic Bracing
Intended Use
The device is intended to restrict motion of the wrist and/or thumb.
Arctic Bracing
Indications for Use
For conditions that may benefit from restricting motion of the wrist, such as:
·Mild to severe sprains and strairis. · Tendonitis. ·Post-cast healing. ·Other
selected soft ussue injuries.
Arctic Bracing
Description of Parts
PAGE 1
Dorsal Stay Pull Tab
Arctic Bracing
Instructions
STEP 1
STEP 2
Unfasten all straps.
STEP 3
Slide onto the hand. Be sure the thumb part on the side of the device is
aligned
STEP 4
Insert the thumb into the thumb guide provided
Remove and reposition the dorsal stay. Align the
on the brace until it encloses the metacarpophalangeal dorsal stay with the middle of the hand/finger
joint. Tighten the thumb part. The thumb end joint
remains freely movable
PAGE 2
STEP 5
STEP 6
Pull Quick-Pull closure strap to tighten laces.
Fasten the strap on the ulnar side to secure the
Wrap strap around device and secure the hook and wrist
loop closure
STEP 7
The palmar and thumb stay can be removed from the device in order to bend to suit the contours of your wrist and thumb. To do this, pull the stay out of the pocket on the underside of the device
PAGE 3
Arctic Bracing
Cleaning and Care
·Hand-wash using mild detergent and rinse thoroughly. · Air dry. ·Do not
machine wash, tumble dry, iron, bleach, or wash with fabric soffener. ·Avoid
contact wilh salt water or chlorinated water. in case of contact, rinse with
fresh water and air dry.
PAGE 4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>