GERMAN POOL PHS-200 Commercial Grade High Speed Food Processor User Manual

: September 12, 2024
: GERMAN POOL

Table of Contents

GERMAN POOL PHS-200 Commercial Grade High Speed Food Processor
Product Information
Product Usage Instructions
Product Structure
Operating Instructions
Care & Maintenance
Technical Specifications
Warranty Terms & Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GERMAN POOL PHS-200 Commercial Grade High Speed Food Processor

Product Information

Specifications

Model : PHS-200 Commercial Grade High-Speed Food Processor
Designed for : Domestic use
Power Supply : Standard home electricity supply
Usage : Indoor use only

Product Usage Instructions

Notice Before Use
Before using the food processor, please carefully read and understand the following safety instructions:

Ensure the electrical rating matches your home’s power supply before plugging in the appliance.
Never submerge the unit base in water or other fluids to prevent short circuits.
Avoid putting the power cord or plug into water for cleaning.
Properly plug the appliance into the wall outlet to prevent overheating.
Do not operate the appliance without loading in the blending jar.
Avoid exceeding the MAX line with liquids in the blender jar to prevent spillage.
Operate the appliance with the lid securely in place, especially when processing hot beverages.

Product Structure
The food processor consists of the following components:

Unit Body
Measuring Cup Seal Ring
Blender Jar Blade Assembly
Blade Mount Drive Coupling Cushion Base
Safety Lock Unit Base
Anti-Skid Rubber
Power Cable
Lid Blender Handle
Sound Enclosure (PHS-CVR)
Control Panel with Preset Programmes

Operating Instructions
To use the food processor:

Ensure all components are assembled correctly as per the user manual.
Add ingredients to the blending jar, ensuring not to exceed the MAX line with liquids.
Safely secure the lid and measuring cup in place before operating the appliance.
Select the desired preset program or set the processing time manually on the control panel.
Start the appliance and monitor the processing until the desired consistency is achieved.

Frequently Asked Questions (FAQ)

FAQ

Q: Can I use this food processor for commercial purposes?
A: The PHS-200 food processor is designed for domestic use only and may not be suitable for commercial applications.

Commercial Grade High-Speed Food Processor
Please read these instructions and warranty information carefully before use and keep them handy for future reference.

USER MANUAL

Please register your warranty information now !
For Warranty Terms & Conditions, please refer to the last page of this user manual.

Notice Before Use

Important

For safety purpose, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference.
The appliance is designed for domestic use and may only be installed and operated in accordance with this instruction manual.
Do not run the appliance without loading. It is strictly forbidden to operate this appliance without the presence of any liquids, solids or semi-solids inside the blending jar.
1. Before plugging in the appliance, check that the electrical rating shown on the rating plate corresponds with your home electricity supply.
2. Never submerge the unit base of the appliance in water or other fluids, nor rinse it under the tap, to avoid risk of short-circuit or electric shock. If there is water inside the unit base, please contact German Pool or a licensed technician for repair.
3. Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs with damp cloth, nor plug in with wet hands.
4. Plug the appliance to the wall outlet properly and securely. Loose plug may lead to overheating or electric shock.
5. If the power cord is damaged, it must be replaced by the manufacturer, its service agents or qualified electricians in order to avoid a hazard.
6. Never leave the appliance unattended.
7. Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe personal injury and/or damage.
8. Do not run the appliance without loading in the blender jar.
9. To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
10. Do not expose the appliance to heat sources such as a radiator or sunlight. For good ventilation, do not place cloth underneath the appliance.
11. The appliance is for indoor use only.
12. Always operate with the lid in place. When processing hot beverages, properly secure the lid and measuring cup in place to avoid scalding due to spraying of hot liquids.
13. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or any individual lack of experience and knowledge, unless they have been given supervision or instruction by a person responsible for their safety.
14. Children should be supervised to ensure that they do not play with the appliance.
15. Switch off the appliance and disconnect from supply before changing accessories or touching any rotating parts.
16. The blade is very sharp, use with caution when handling the blade, emptying the jar and during cleaning. Do not attempt to disassemble the blade assembly and touch any rotating parts.
17. Unplug the power cord from the wall outlet when the appliance is not in use, before putting on or taking off parts, and before cleaning.
18. If the motor has overheated, the temperature monitoring system will be triggered and the motor will stop.
  Switch off the appliance and let the motor cool down. The motor temperature monitoring system will reset after the food processor is unplugged from wall socket for 45 minutes.
19. Any servicing should be performed by an authorised service representative. Do not attempt to disassemble, repair or modify the appliance.

Product Structure

Unit Body

Control Panel

Operating Instructions

Important

Do not run the appliance without loading. It is strictly forbidden to operate this appliance without the presence of any liquids, solids or semi-solids inside the blending jar.
Under no circumstances should the blending jar be submerged in any liquids. Do not spray or splash any liquids at the blending jar base. Do not directly rinse the blending jar base under the tap. The blending jar is not suitable for the dishwasher. If the blending jar base is sprayed or splashed wet, dry immediately.
Under no circumstances should the blending time exceed 1 minute when dry-grinding. It is advised to let the appliance rest for 5 minutes before resuming dry-grinding.

ON/OFF Button

Plug in the power, all the indicators light up for 0.5 sec, the buzzer beeps for 1 sec, then the unit turn to standby mode directly. Red light on the ON/OFF button flashes with other indicator lights off. Press ,the red light on the button stays lit, programme indicators on the control panel: and the digital screen turn white and the display shows 00:00, speed control indicators turn white. The unit is in standby mode at this moment (in standby mode, if the unit is left idle for 3 minute, it will automatically turn to energy-saving mode, for every touch control, the buzzer beeps for 0.5 second). In any working mode, touch button, the unit will switch to standby mode.
User should choose the preset program and working speed , Press the button, the unit will operate in corresponding preset program. In any working mode, press the button, the unit stops working and switches to standby mode.

Speed Setting Buttons

Press any , then the indicators on the left side of the pressed button will light up and flash for 30 sec. press the button in 30 sec, the indicator turns white and stays lit, the unit starts to work in the corresponding speed. Indicators on the left side of the corresponding working speed turn white and stay lit, (For example: when the unit works at speed 8, indicators on the left side of speed 8 light up), other speed indicators stay semi- bright, time display counts from “00:01”. Press ****button when it’s time to stop. The unit stops working and turns to standby mode; the maximum working time of the unit is 10 minutes, after 10 minutes, the unit stops working (the time displays 10:00 and pause for 5 sec) and automatically goes to standby mode

Pulse Button

Pulse button is a manual button. In standby mode or working mode, press and the indicator flashes for 0.5 sec and pauses for 0.5 sec. The unit does not operate until long press ****on button in 30 sec. The unit starts to work and time display counts from “00:01”. Loose the button, and the unit stops working, and time display stops to keep timing. If the unit is idle for 5 sec, the unit will automatically turn to standby mode and the motor will work in speed H. When the time display shows the maximum time of 10:00, the unit will automatically turn to standby mode.

Preset Programmes
In standby mode, press any preset programme icon, the corresponding indicator will flash (flash time: 30 sec), press the ****button in 30 sec, the unit will work in the corresponding preset programme. After the programme finishes, the unit turns back to standby mode.

Icon	Programme	Descriptions
Dough	Continuously work at speed 1 for 2 min (400g flour + 240g water).
Sauce	Speed 8 for 2 sec and pause for 1 sec. Repeat the cycles 5 times.

Then speed H for 45 sec. Total time is 1 min.

Soft booting for every operation.

| Vegetable|

Speed H for 30 sec and pause for 2 sec; then speed 6 for 10 sec and pause for 2 sec; then speed H for 60 sec and pause for 2 sec; finally speed 6 for 10 sec.
Total time is 1 min 56 sec. Soft booting for every operation.

| Hot Drinks|

Accelerate to speed 7 in 7 sec.
Then accelerate to speed H in 3 sec and stay at this speed until finish. Total time is 8 min.

| Nuts|

Speed 5 for 5 sec.
Then speed 8 for 2 sec and pause for 1 sec, repeat 10 times. Total time is 35 sec.
Soft booting for every operation.

| Smoothie| Speed H for 8 sec and pause for 2 sec. Run in cycle until finish. Total time is 30 sec. Soft booting for every operation.

Installation of Sound Enclosure

Step 1
Press the two sides of the detachable rim and push it out to the backside.
Step 2
Remove the detachable rim from the blender.
Step 3
Place the cushion mat flat to install. The cushion mat should be in the correct position by aligning the three buckle parts.
Step 4
Slightly open the two sides of the sound enclosure to install. Make sure the cushion mat and the sound screen are being locked in the right position.

Measuring Cup, Lid and Blade Mount

Insert the measuring cup to the lid (align the two bumps on the measuring cup to the two grooves on the lid and turn anti-clockwise to position). Then press down the lid of the blender jar to close. To open, pull up by the flap of the lid.
The seal ring is detachable from the lid for easy cleaning. Remove seal ring from the lid after use to thoroughly clean the lid and rinse off food residue from seal ring.

Notice for Operation

The appliance will not start operation until the blender jar is placed onto the unit base for safety purpose.
Insert the measuring cup to the lid (align the arrow on the cup to the symbol on the lid and turn it to position). Then press down the lid to the blender jar to close. To open, pull up by the flap of the lid.
During operation, close the lid tightly to avoid injuries due to spilling or splashing of hot liquids.
Wind excess power cord underneath the unit base to prevent the rubber foot from stepping on the power cord.
When the food is too thick or there is too little liquid in the jar, the motor will be dragged to a low speed or stop to operate. Hence, when blending thick and sticky food, start blending from low to high speed. If it is still unable to blend, disconnect the power and stir the food inside the jar using a rubber stirrer to drive out the air trapped in food. Then close the lid and switch on the blender to continue the operation.
When overheating is sensed, the temperature monitoring system will be activated and would stop the operation of the motor. In this case, put the appliance in a place with good ventilation to cool down for 45 minutes. The system will be reset and you may resume the operation of the appliance.
Keep hands and utensils out of the jar while the motor is running to prevent the possibility of severe personal injury and/or damage.
When making hot beverages or soups (such as soy milk, porridge, bisque, etc.), please ensure the lid is secured tightly to the jar to prevent it from falling. Please be advised to start the operation at low speed first and then gradually increase the speed, or simply use the “Pulse” mode.
When making sauces (eg. almond sauce, jam and sesame sauce), stuffing and nuts, put in around 2 to 3 cups of ingredients. The amount should neither be too much or too little. Keep the blending time within 2 min to prevent any burnt smell due to overheating. Too much ingredients may lead to overloading and overheating of the motor. In this case, wait till the motor temperature drops before operating again.
Please put liquid and soft food into the jar before putting in hard food or ice cubes.
When the operation finishes, please wait until the blade assembly comes to a complete stop before taking out the blender jar.
If you smell a burnt smell from the blender, stop operation immediately. It may be caused by the abrasion of the rubber cushion base if it is not properly assembled.
Do not operate continuously for over 10 minutes each time.

Care & Maintenance

Power plug must be disconnected before cleaning and repair.
Clean surface of the blender jar with soft cloth or sponge. The measuring cup and the seal ring can be detached for cleaning.
The blender jar can be rinsed with water.
The seal ring is detachable from the lid for easy cleaning.
After cleaning, put the blender jar on its side or upside down to dry*. Do not submerge the whole jar in water.
To dry the blender jar in upside down position, please remove the residual water with a dry cloth. Do not position it near the sink or basin to avoid water spraying to the base of the jar. This may cause rusting of the bearing and thus affect the performance of the blender.
Do not submerge the unit base or power cord into water or other liquids. Clean the unit base with soft cloth.

A Friendly Reminder :
To effectively remove dirt on the jar and blades and help them last longer, do the following: add in water and lemon, close the lid and then press “Pulse ” button 2 to 3 times. Replace liquid with clean water and repeat the above step.

3 Easy Steps to Cleaning the Blender Jar
Caution: Do not submerge the blender jar into water

Add 1-2 slices of lemon into 750ml water. Select “Vegetable” Programme.
Pour out water. Repeat Step 1.
Pour out water, and wipe it dry with a clean cloth. Put the jar sideways and let it air-dry.

Technical Specifications

Model No	PHS-200
Voltage / Frequency	220-240 V ~ 50/60 Hz
Rated Power	1200 W
Dimensions

(H) 430 mm
(W) 245 mm
(D) 484 mm
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail.
Refer to www.germanpool.com for the most up-to-date version of the User Manual.

Warranty Terms & Conditions

Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).

This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:

Visit our website and register online: www.germanpool.com/warranty
Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.

Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.

Model No : PHS-200
Serial No :
Purchased From :
Invoice No :
Purchase Date :

Customer who fails to present original purchase invoice will not be eligible for free warranty service.
Customer should always follow the operating instructions. This warranty does not apply to:
- labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs;
- damages caused by accidents of any kind (including material transfer and others);
- operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.
This warranty is invalid if:
- the purchase invoice is modified by an unauthorized party;
- the product is used for any commercial or industrial purposes;
- the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed;
- the serial number is modified, damaged or removed from the product.
German Pool will, at its discretion, repair or replace any defective part.
This warranty will be void if there is any transfer of ownership from the original purchaser.