JENSEN DENTEL PRETTY COOL InSyn ZR Veneering Ceramic User Guide

Veneering ceramic
QUICK START GUIDE
For a perfect start.

Firing Tables

The following firing temperatures are reference values and can vary according to furnace type.
Please note the information on firing graphs in chapter 1.4 in the Instruction Manual.
We recommend, where the construction allows, that a slow cooling phase of six minutes to achieve the stand-by temperature be carried out during the last firing (glaze and stain firing).
Firing table for ZrO2 restorations

| Starting temperature [°C]| Dry time [min]| Closing time [min]| Vacuum start [°C]| Heat rate [°C / min]| End temperature [°C]| Vacuum end [°C]| Holding time [min]| Opening time [min]
---|---|---|---|---|---|---|---|---|---
1. Liner firing| 450| 6| 2| 450| 60| 970| 970| 1| 1
2. Liner firing| 450| 6| 2| 450| 60| 960| 960| 1| 1
**Core Dentin firing*| 450| 4| 2| 450| 40| 810| 810| 1| 1
1. Dentin firing| 450| 4| 2| 450| 40| 765| 765| 1| 1
2. Dentin firing| 450| 4| 2| 450| 40| 760| 760| 1| 1
Correction**| 450| 4| 2| 450| 45| 700| 700| 1| 1
Glaze firing
without glazing material| 450| 4| —| —| 45| 755| —| 1| 1
Glaze firing
** with glazing material| 450| 3| 4| 580| 45| 720| 720| 1| 1

• Not suitable for use with lithium disilicate.
  Correction firing with correction material.
  Firing table for Lithium- Disilicate restorations**

| Starting temperature [°C]| Dry time [min]| Closing time [min]| Vacuum start [°C]| Heat rate [°C / min]| End temperature [°C]| Vacuum end [°C]| Holding time [min]| Opening time [min]
---|---|---|---|---|---|---|---|---|---
1. Dentin firing| 450| 4| 2| 450| 40| 765| 765| 1| 1
2. Dentin firing| 450| 4| 2| 450| 40| 760| 760| 1| 1
Correction**| 450| 4| 2| 450| 45| 700| 700| 1| 1
Glaze firing
without glazing material| 450| 4| —| —| 45| 755| —| 1| 1
Glaze firing
with glazing material| 450| 3| 4| 580| 45| 710| 710| 1| 1

Firing table for Titanium restorations

| Starting temperature [°C]| Dry time [min]| Closing time [min]| Vacuum start [°C]| Heat rate [°C / min]| End temperature [°C]| Vacuum end [°C]| Holding time [min]| Opening time [min]
---|---|---|---|---|---|---|---|---|---
Opaquer brand ***| 450| 4| 2| 450| 55| 800| 800| 2| 1
1. Dentin brand| 450| 4| 2| 450| 45| 760| 760| 1| 1
2. Dentin brand| 450| 4| 2| 450| 45| 750| 750| 1| 1
Corrector ****| 450| 4| 2| 450| 45| 700| 700| 1| 1
Glaze firing
without glazing material| 450| 4| —| —| 45| 735| —| 1| 1
Glaze firing
with glazing material| 450| 3| 4| 580| 45| 720| 720| 1| 1

• Not suitable for use with lithium disilicate.
  ** Correction firing with correction material.

Shade Combination Table

Shade| A1| A2| A3| A3,5| A4| B1| B2| B3| B4| C1| C2| C3| C4| D2| D3| D4
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Liner| 1| 2| 2| 2| 4| 1| 1| 2| 2| 1| 3| 3| 4| 1| 5| 5
Titan Opaquer| A1| A2| A3| A3,5| A4| B1| B2| B3| B4| C1| C2| C3| C4| D2| D3| D4
Core Dentin| CD2| CD6| CD6| CD3| CD5| CD6| CD6| CD3 CD51)| CD5| CD2| CD4| CD5| CD5| CD4| CD5| CD5
Opaque Dentin| A1| A2| A3| A3,5| A4| B1| B2| B3| B4| C1| C2| C3| C4| D2| D3| D4
Dentin| A1| A2| A3| A3,5| A4| B1| B2| B3| B4| C1| C2| C3| C4| D2| D3| D4
Enamel| LIGHT YELLOW| YELLOW| YELLOW| DARK ORANGE| DARK ORANGE| LIGHT YELLOW| YELLOW| ORANGE| DARK ORANGE| YELLOW| YELLOW| ORANGE| DARK ORANGE| LIGHT YELLOW| YELLOW| ORANGE
Enamel 2)| 57| 57| 58| 59| 59| 57| 58| 58| 59| 58| 59| 59| 59| 59| 59| 59

1. CD3 | CD5 in the ratio 50:50 | 2) The Enamel masses 57-59 are used in combination with Core Dentin.

Twist-lock

All liquid bottles are equipped with a practical Twist-lock.
First pull off the seal. The upper cap can then be easily opened or closed with one hand.
Thus, a drop-by-drop use of the liquid is possible.

Downloads
IFUs, technical data sheets, safety data sheets etc. are available for download in different languages on our website: www.jensendental.de

https://www.jensendental.de/de/downloads

Support
General requests: info@jensendental.de
+49 7123 92260
Technical support: support@jensendental.de

https://www.jensendental.de/de/

Sales and Technical Support Europe:
Jensen GmbH
Gustav-Werner-Straße 1
72555 Metzingen, Germany
+49 7123 92260
info@jensendental.de
www.jensendental.de
www.miyoworld.eu

References

• Home
• miyoworld.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>