BOULT Cruisecam X1 GPS Dash Camera User Manual

Table of Contents

Product Information

Specification

Brand: Cruisecam
Model: X1 GPS
Power Supply: Type C
Included in the Box: Dashcam, Type C Car Charger with GPS Module, User Manual, Warranty Card

Installation Steps

Use a clean, soft cloth to clean the windshield to ensure the support bracket can adhere firmly.
Insert the formatted SD card into the CruiseCam, remove the 3M tape film from the bracket, and paste it behind the rearview mirror on the windshield, leaving space for wiring.
Connect the car charger to the dashcam and plug it into the 12V power socket. Route the cable as shown in the figure.
Once installed and the car is started, the CruiseCam will automatically turn on and start recording. The indicator light will flash to indicate normal operation.

Wi-Fi Instructions

For iOS devices: Search for “Boult Cruise” on the App Store and download it for free.
For Android devices: Search for “Boult Cruise” on Google Play Store or scan the QR code for a quick download.

Wi-Fi Connection:

Turn on Wi-Fi on your phone and connect to SSID: CruiseCam-BLTX1XXX with password: 12345678
Open the Boult Cruise app to operate the recorder.

Button Operating

Press once to take a photo during the video recording.
Press and hold the button for 5 seconds to restore factory settings and restart.

Indicator Light

Precautions

Remove the protective film from the device lens before installation.
Use only the provided power cord to avoid overheating or instability.
Avoid placing the device randomly without sticking it and do not fix it where the airbag is located.
Avoid adjusting or watching videos on the phone while driving for safety.
Avoid installing the recorder where it may obstruct the driving line of sight.
Avoid exposing the recorder to temperatures below -10°C or above 55°C.

Q: What type of SD card should I use with the Cruisecam X1 GPS?

A: Please use an SD card with a reading and writing speed of at least CLASS 10 and above. Remember to format the SD card in the device before usage.

Q: How often should I format the SD card?

A: It is recommended to format the SD card every 2-3 months to ensure normal recording and operation.

Q: What should I do if the indicator lights show a specific pattern?

A: Different indicator light patterns indicate different statuses. Refer to the user manual to understand each pattern’s meaning.

Q: Can I use a different charger to power the device?

A: It is recommended to use only the special power cord included in the package to power the device to prevent overheating or instability.

What’s in the box?

Use a clean, soft cloth to clean the windshield to ensure that the support bracket can be firmly adhered.
Take out your CruiseCam, insert the formatted SD card, tear off the 3M tape film on the bracket, and then paste the bracket in the appropriate position. It is recommended to paste it on the windshield behind the rearview mirror. Leave some space
for easy wiring.
Put the car charger into the 12v power socket and connect it to the dashcam. It is recommended to route the cable in the direction shown in the figure:
After the CruiseCam is installed and the car is started, the CruiseCam automatically turns on and records video. The working indicator light flashes, indicating that it has started normal working.
- Note: Please use an SD card with a reading and writing speed of at least CLASS 10 and above. Please format the SD card in the device before using it. The videos will be recorded in a loop of 1 minute by default.
- When the card is full, older videos will automatically be deleted. (To ensure normal recording, it is recommended to format the SD card every 2-3 months)

Application Installation

For iOS devices: Please search “Boult Cruise” from the APP Store and download it for free.
For Android devices: Please search “Boult Cruise” from the Google Play store and download it for free. Or scan the QR code below for a quick download.
Turn on the Wi-Fi function on the mobile phone, search for the following Wi-Fi name, and enter the password SSID: CruiseCam-BLTX1XXX
Password: 12345678
After the Wi-Fi connection is successful, enter Boult Cruise” to operate the recorder on the APP.

Before installation, please remove the protective film of the device lens, and keep the camera and the installation location clean.
This device uses a special power cord, which is included in the package. Please do not use any other charger to power the device, so as to avoid overheating or causing instability.
When the product is installed in the car, please do not place it randomly without sticking it. Do not fix it where the airbag is.
Do not adjust the recorder or watch the video on the mobile phone while driving, pay attention to driving safety.
Do not install the recorder in a position that may block the driving line of sight.
The suitable working temperature of this recorder is -10 C ~55 C, please do not expose it to an overheating environment.