Haylou ТWS ВТ Earphones User Manual
- September 11, 2024
- Haylou
Table of Contents
Haylou ТWS ВТ Earphones
Overview
What’s in the Box
Eartips X 3 pairs(middle-size eartips have been put on already), Bluetooth earbuds, charging case charging cable, user manual.
Basic Parameters(earbuds)
- Operation range: 10m(open space with no obstacle)
- Battery capacity: 43mAh(single earbud)
- Charging time: approx. 1.5hr
- Calling time: approx. 3.5hr
- Standby time: approx. 150hr
- Input parameter: 5V = 100mA
- Battery type: Li-ion
- Bluetooth version: 5.0
Basic Parameters (case)
- Input parameter:5V = 1000mA
- Output parameter:5V=500mA
- Charging time: approx. 3hr
- Standby time: approx. 4 months
- Battery capacity: 2200mAh
- Battery type: cylindrical battery
How to wear
When calling, adjust the Mic towards the mouth to gain a better talking experience.
How to Charge
Before using, please peel off the sticker covering the pogo pins and top up
the earphones.
Power-on
Take out earbuds from the case to power on them. Or keep touching panels for
1s to power on earbuds (LED glows solid white ) when they are not in the case.
Power-off
Put earphones into the case to power off them. Or keep touching both panels
for 5s to power off earphones ( LED glows solid red for 2s ).
Stereo Mode
Auto pairing: take out both EarBuds from the case and they will auto pair with
each other in 2 or 3s. Earphones will be connected to cell phones when the LED
on either EarBud blinks white slowly. On your cellphone, search for ”
Haylou-T15 ” and tap to connect. If earbuds tail to be connected to a
cellphone, please put them back in the case and repeat the above steps.
Earbuds will auto-reconnect to the last device in connectivity records, if
any. (Bluetooth faculty needs to be activated).
Note: earbuds have been set to the factory since shipping out.
Manual pairing: manually power on two earbuds and they will auto-pair
with each other when the LED blinks white promptly. Then either LED will blink
white slowly and now you can tap it on your cellphone to connect.
Mono Mode
Auto connecting: take out either earbud from the case to power on it. LED
will then blink white slowly. On your cellphone, search for Haylou-T15 and tap
to connect. Once powered on earbuds will auto-reconnect to the last device in
connectivity records, if any. Manually connecting: manually power on either
earbud. Its LED will soon blink white slowly and then search for Haylou-T15 on
your cellphone and tap to connect.
Functions
LEDs on Charging Case
All three battery LEDs will blink 3 times then the numbers of them will glow solid for 30s according to the practical battery level whenever you open or close the lid. (If you need to check the battery level again, please close and re-open the lid again.) Low battery warning: only one LED blinks white.
Battery Level Display
LED will glow solid red when charging and turn off once the case is topped
up.
Caveats
- Never disassemble or modify your headset for any reason to avoid any damage and danger.
- Do not store the headset in extreme temperatures (under 0°C or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the headset.
- Keep the headset dry.
Factory Setting
If earphones do not function well, please refer to the following steps to reset the factory: take the earbuds out from the case. Power off the earphones then touch both panels for about 15s (the LED will blink red and white three times twice). Ater that, put them back in the case. Delete the connectivity record on the cellphone before processing another pairing (All connectivity records relating to the earbuds will all be removed).
Audio only outputs from the single earbud
It’s really rare. Please reset GT1 Pro, remove the connectivity record on your
cellphone, and re-connect the earphones to your cellphone.
Other cases of charging
LED glows solid white for 1 minute when the earbuds are topped up. The carry
case cannot charge earbuds if its battery drains. LEDs on the carry case will
turn off once the case is topped up. If you charge it once again, LEDs will
not give any notice, which does not mean the case is not charged.
Daily maintenance
Please do not shower with earbuds. Do not wear them on rainy days. Do not
leave them in the washing machine or other extreme situations. Clean them with
dry cloth after use in pursuing a longer service life.
Tips
- Before using the headset, please read the manual carefully and keep it for future reference.
- The headset needs to be fully charged before first use.
- If the headset is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by a qualified manufacturer.
- If the headset cannot be found on your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure the error of your phone occurs, reboot it; if a procedure the error of the headset occurs, reboot or reset it. No.5 Longxi Road, Zhouxi Community, Nancheng District, Dongguan City, Guangdong, China. Manufacturer: Dongguan Liesheng ElectronicCo., Ltd.
Web: www.haylou.com Made In China
Hazardous substances and their contents in the item.
This form is made by SJ/T 11364 regulation.
0: means that hazardous substance content in the homogeneous materials of
this part is within the limits of (EU) 2015/863 regulation.
X: means that hazardous substance content in, at least, one certain
homogeneous material of this part is beyond the limits of (EU) 2015/863
regulation, but there is no mature alternative in the industry at present, it
still conforms to the EU ROHS Directive in the scope of the exemption.
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time.
Aftersales & Support
Warranty Period:
12 months after purchase (please keep your receipt properly)
Free Service
If any quality defects happen during the warranty period, please take the
receipt and contact your distributor for aftersales service.
Following cases or any damages/defects that are not due to quality issues are not covered in the warranty.
- Any defects or damages caused by natural disasters, abnormal voltage, or other environmental facts.
- Any unauthorized disassembly, modification, or change of parts.
- Any damages caused by improper use of the product including soaking, corroding, falling, squeezing, or exposure to abnormal temperature or humidity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>