HAYLOU GT1 2023 True Wireless Earbuds User Manual

HAYLOU GT1 2023 True Wireless Earbuds

Product Information

The Haylou GT1 2023 True Wireless Earbuds come with LED Type-C charging port and MFB (multi-functional button) mic. The earbuds have a Bluetooth version of V5.3 and can operate within a range of 10m in an open space with no obstacle. The earbuds have a battery capacity of 35mAh (single earbud) and the charging time is approximately 1.5 hours. The earbuds can play music for approximately 5 hours and have a standby time of approximately 60 hours. The input parameter for the earbuds is 5V 50mA and the battery type is li-ion.

The charging case has a battery capacity of 310mAh and the input parameter is 5V 500mA. The output parameter is 5V 100mA and the charging time is approximately 2 hours. The battery type for the charging case is li-ion.

Product Usage Instructions

How to Wear
Gently insert the earbud into the ear canal and adjust the earbud to the most comfortable wearing state.

How to Charge
For first time use, remove the isolation film on the charging contacts of both earbuds. Fully charge the charging case and earbuds by plugging in the charging cable to charge them at the same time. The charging indicator light will be solid red when the charging case is not fully charged. The indicator light goes out after fully charged.

Power-on
Take out the earbuds from the case to auto power on or keep touching the MFB button for about 1.5s to power on if the earbuds are out of the case and in power-off state.

Power-off
The earbuds will auto-power off when put in the charging case. Keep touching the MFB button for 4.5s to power off if the earbuds are out of the case and in power-on state.

Functions
The following are the functions of the MFB button:

• Short touch MFB button: Play/pause music
• Double touch the left MFB button: Skip track backward
• Double touch the right MFB button: Skip track forward
• Double touch MFB button: Answer/hang up
• Triple touch left MFB button: Activate voice assistant
• Triple touch right MFB button: Turn on/off low latency mode

When there is a new incoming call during a call:

1. Hold the previous call then answer the second call by double-touching the MFB button
2. Hold the previous call then reject the second call by double touching the MFB button and keep touching for about 1.5s
3. Switch two calls by keep touching for about 1.5s

Factory Setting
The factory setting can be done by following the below steps:

1. Put both earbuds into the charging case and ensure the case has sufficient power.
2. Press and hold the MFB buttons of the earbuds for 10s until the lights flash red and white alternately 3 times and go out.
3. Clear phone pairing record, then turn off, and complete the connection again.

Common Abnormals
If one of the earbuds is mute:

• Take out both earbuds from the charging case and put them back in to see if they are connected properly.
• Clear phone pairing record, then turn off, and complete the connection again.
• Reset the earbuds to factory setting as mentioned earlier.

Package List
The package includes earbuds, charging case, charging cable, and user manual.

Contact Information
For any queries, please contact Haylou customer service at:

• Phone: 861 401-410
• Website: www.haylou.com
• Toll-Free: 4008-555-083

Overview

How to Wear

Gently insert the earbud into the ear canal, and adjust the earbud to the most comfortable wearing state.

When calling, adjust Mic towards the mouth to gain a better talking experience.

How to Charge

For first-time use, please remove the isolation film on the charging contacts of both earbuds. Then fully charge the charging case and earbuds.

Plug in the charging cable to charge the earbuds and the charging case at the same time. The charging indicator light will be solid red when the charging case is not fully charged. The indicator light goes out after fully charged.

Power-on

1. Take out to auto power on when the earbuds are in the case.
2. If earbuds are out of the case and in a power-off state, keep touching the MFB button for about 1.5s to power on.

Power-off

1. The earbuds will auto-power off when put in the charging case.
2. Keep touching the MFB button for 4.5s to power off.

How to Pair

Take two earbuds out from the charging case simultaneously, then open device Bluetooth and search for “Haylou GT1 2023”, finally click it to complete the connection. Put the earbuds back to the charging case and repeat the above operation if the connection fails. After the first connection, the earbuds can be automatically connected to the last paired device (Bluetooth needs to be turned on).

Manual connection:
When earbuds are turned off, manually turn on both of them. Wait 2-3 seconds for them to turn on and connect to each other. Turn on device Bluetooth to connect when light on single earbud flashes white slowly.

Switch between mono and stereo mode:
It is stereo mode after two earbuds are successfully connected. Put one back into the case to power off, the other will enter mono mode. Or pick it up again to resume stereo mode.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.

Functions

When there is a new incoming call during a call:

1. Hold the previous call, then answer the second call: double touch
2. Hold the previous call, then reject the second call: Keep touching for about 1.5s
3. Switch two calls: Keep touching for about 1.5s

Factory Setting

1. Put both earbuds into the charging case and ensure the case has sufficient power. Then press and hold the MFB buttons of the earbuds for 10s until the lights flash red and white alternately 3 times and go out;
2. Clear phone pairing record, then turn off, and complete the connection again.

Common abnormals:

1. One of the earbuds is mute: Try to put the mute earbud into the charging case and then take it out; If the problem is still not solved after the above operation, try the reset steps;
2. The earbud cannot be charged: Check whether the charging case has sufficient power; Wipe the charging contacts with a dry cloth or cotton swab;
3. The earbud cannot automatically disconnect from the mobile phone; Check whether the charging case has sufficient power. The earbud will not power off if the case is out of power and will not disconnect from the mobile phone.

Package List

• Earbuds
• Charging case
• Charging cable
• User manual.

Parameters

Basic Parameters (earbuds)

• Operation range: 10m (open space with no obstacle)
• Battery capacity: 35mAh(single earbud)
• Charging time: approx. 1.5hr
• Playing time: approx. 5hr
• Standby time: approx. 60hr
• Input parameter: 5V 50mA
• Battery type: Li-ion
• Bluetooth version: V5.3

Basic Parameters(charging case)

• Input parameter: 5V 500mA
• Output parameter: 5V 100mA
• Charging time: approx. 2hr
• Battery capacity: 310mAh
• Battery type: Li-ion

Caveats

Warning

1. Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
2. Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
3. Keep the indicators away from the eyes of children and animals while using the earphones.
4. Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
5. Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
6. Avoid any contact with liquids.

Note

1. Please read this user manual carefully before using the product and please properly store it.
2. When using it for the first time, please fully charge this product.
3. Please charge the product, in case it has not been used for over two weeks.
4. Please use a certificated charger.
5. Do not wear earphones for the long term to protect your hearing.
6. Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.

FCC Compliance Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be coÿlocated or operating in conjunction with any other antenna or transmitter.

Daily maintenance
Please do not shower with earbuds. Do not wear them on rainy days. Do not leave them in the washing machine or in other extreme situations. Clean them with a dry cloth.

Warranty Card

Warranty Period
12 months after you purchase this item. ( or you may inquire your local shopper for more details.)

Free Service
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number|
---|---
Date of Purchasing|
User s Name|
User s Phone|
User s Address|
Shop s Name|
Shop s Address|
Comments|

Free exchange service will not be accessed under the following circumstances:

1. Damages caused by unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by an act of God.
   Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Manufacturer:
Dongguan Liesheng Electronic Co., Ltd.

Address:
Room 401-410, Building 1, No. 86 Hongtu Road, Nancheng District, Dongguan City, Guangdong, China.

References

• Power in self – Haylou

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>