HAYLOU X1 2023 True Wireless Earbuds User Manual
- October 30, 2023
- Haylou
Table of Contents
HAYLOU X1 2023 True Wireless Earbuds
Product Information
This product is designed to comply with the FCC radiation exposure limits for an uncontrolled environment. It is a transmitter that must not be used in conjunction with any other antenna or transmitter.
Product Usage Instructions
When using this product, it is important to ensure that it is not operating in
conjunction with any other antenna or transmitter.
This will help to prevent interference and ensure that the product is
operating at optimal levels.
It is also important to follow all instructions provided in the user manual to ensure safe and proper use of the product. This includes following any specific guidelines for installation, setup, and operation of the transmitter.
If you have any questions or concerns about the product or its usage, please refer to the user manual or contact the manufacturer for further assistance.
Overview
How to Wear
Gently insert the earbud into the ear canal, adjust the earbud to the most comfortable wearing state.
When calling, adjust Mic towards mouth to gain better talking experience.
How to Charge
For first time use, please remove the isolation film on the charging contacts
of both earbduds.
Then fully charge the charging case and earbuds.
-
Plug charging cable to charge the earbuds and the charging case at the same time.
When the charging case is not fully charged, the LED flashes based on the current power of the charging case. After fully charged, the LED goes out. -
When clicking the button of the charging case or putting the earbuds into the charging case, the LED flashes based on the current power of the charging case.
Warm tips: the earbuds can’t be charged when the charging case has no power and no LED Light.
Power-on
Take the earbuds out from the charging case, they will automatically power on.
- Put the earbuds back into the charging case. if the charging case has power, the earbud will automatically power off. If the charging case has no power, the earbud will maintain the current state.
- The earbuds power off outside the charging case: they will automatically power off if not connected to the device within 3 minutes.
How to Pair
Automatic connection:
- There is no pairing record: Take the earbuds out, they will complete TWS re-connection within 5s and enter the pairing state; or they will enter monaural pairing state after 5s.
- There is a pairing record: The earbuds are in the charging case with the lid open. Press and hold the charging case button for 2s to enter the pairing mode;
Open device Bluetooth and search for “Havlou X1 2023”, then click it to
connect.
Put the earbuds back into the charging case and repeat the above operation if
the connection fails.
After the first connection, the earbuds can be automatically connected to the
last paired device when powering on (Bluetooth needs to be turned on).
When pairing, the green light of the charging case continuously flashes.
Functions
Restore Factory Settings
- The earbuds are powered on and not connected to the device;
- The charging case has power and the earbuds are in the charging case. Press and hold the charging case reset button for 6s to clear pairing record (the LED flashes green 6 times) and restore factory settings;
- After resetting, put the earbuds into the charging case and close the lid, then open the lid and take them out again;
- Clear phone pairing record and follow the pairing steps to complete Bluetooth connection.
Audio only Outputs from Single Earbud
It’s unusual indeed, please refer to the following operation steps if the
situation occurs:
- Put the earbuds back into the charging case, and then take them out again to connect.
- Refer to the reset steps to reconnect the Bluetooth device.
Other Charging Problems
- The white LED goes out when the earbuds are fully charged.
- When the charging case is out of power, the earbuds cannot be charged and keep the original connecting status.
- LED flashes solid white when the charging case is fully charged.
Package Overview
- Earbuds, charging case,
- Charging cable, user manual.
- Earbud model: HAYLOU X1 2023
- Earbud name: True Wireless Earbuds
Basic Parameters(earbuds)
- Operation range: 10m (open space with no obstacle)
- Battery capacity: 35mAh(single earbud)
- Charging time: approx. 1.5h
- Playing time: approx. 5h
- Standby time: approx. 60h
- Input parameter: 5V =- 50mA
- Battery type: li-ion
- Bluetooth version: V5.3
Basic Parameters(charging case)
- Input parameter: 5V =- 300 mA
- Output parameter: 5V =- 100mA
- Charging time: approx. 1.5h
- Battery capacity: 310mAh
- Battery type: li-ion
Caveats
Warning
-
Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
-
Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
-
Keep the indicators away from the eyes of children and animals while using the earphones.
-
Do not use this product during thunderstorms.
Thunderstorms may cause the product to malfunction and increase the risk of electric shocks. -
Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
-
Avoid any contact with liguids.
Note
- Please read this user manual carefully before using the product and please properly store it.
- When using for the first time, please fully charge this product.
- Please charge the product, in case it has not been used over two weeks.
- Please use certificated charger.
- Do not wear earphones for a long term to protect your hearing
- Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
correct the interference by one or more of the following measures:
- Reorient the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Daily maintenance
Please do not shower with earbuds. Do not wear them in rainy day. Do not leave
them in washing machine or other extreme situations. Clean them with dry
cloth.
Warranty Card
Warranty Period 12 months after you purchase this item.
(or you may inquire your local shopper for more details.)
Free Service
Supposing any defects caused by quality issues occur within the warranty
period, please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number
Date of Purchasing
User’s Name
User’s Phone
User’s Address
Shop’s Name
Shop’sAddress
Comments
Free exchange service will not be accessed under following circumstances:
- Damages caused by unauthorized disassemblv.
- Defects or physical damages caused by leaking or dropping off.
- Damages by act of God.
Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
FCC ID:2AMQ6-TO03
Manufacturer: Dongguan Liesheng Electronic
Co., Ltd.
Address: Room 401-410, Building 1, No.
86 Hongtu Road, Nancheng District,
Dongguan City, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>