boAt 181PRO Bluetooth Earbuds Owner’s Manual
- September 10, 2024
- Boat
Table of Contents
181PRO Bluetooth Earbuds
“`html
Product Specifications:
- Product Name: boAt Airdopes 181Pro
- Technology: IWPTM Technology
- Special Feature: ASAPTM Charge, BEASTTMM Mode, ENXTM
Technology
Product Usage Instructions:
1. Bluetooth and Device Connectivity:
Ensure your device’s Bluetooth is turned on. Open the lid of the
Airdopes 181Pro case to enable pairing mode. Locate and connect to
‘Airdopes 181Pro’ from your device’s available Bluetooth devices
list.
2. Charging:
To charge the Airdopes 181Pro, place them back in the charging
case and close the lid. Make sure the case is connected to a power
source using the provided cable. The LED indicators on the case
will show the charging status.
3. Volume Adjustment:
If the earbuds start at a high volume level, adjust the volume
to your preference using the controls on your phone or media
device. This allows you to set a comfortable listening level.
4. BEASTTMM Mode Activation:
To activate BEASTTMM Mode for gaming, refer to the manual for
specific instructions on how to enable this feature. BEASTTMM Mode
reduces latency for an enhanced gaming experience.
Frequently Asked Questions (FAQ):
Q: How do I reset my Airdopes 181Pro?
A: To reset the Airdopes 181Pro, place them in the case and keep
the lid open for 10 seconds. Close the lid and then reopen it to
reconnect the earbuds.
Q: Can I use one earbud at a time?
A: Yes, you can use either the left or right earbud
independently by pairing it with your device separately.
“`
AIRDOPES 181PRO
AIRDOPES 181PRO
Thank you for choosing boAt Airdopes 181Pro. This manual is your guiding map
for navigating the shores of musical bliss. Knowledge of Bluetooth and device
connectivity is essential for steering this boAt. So, we
strongly recommend that this manual be read thoroughly before use and referred
to in times of
difficulty.
IWPTMTECHNOLOGY
·Delve into the song, movie, or podcast of your choice in no time with IWPTM
technology.
·Simply open the lid of the charging case and your Airdopes 181Pro will power
on automatically.
·To disconnect from the sound, place the earbuds back into the charging case
in the correct orientation and close the lid. The earbuds automatically switch
off (Smart Power Off) and enter charging mode.
Dive in and out of the sound on your terms with a flip of the lid!
ASAPTMCHARGE
·Low battery levels will no longer slow down your audio relaxation.
·ASAPTMCharge in these earbuds gives you a performance of up to 100 minutes
after just 5 minutes of charging so that you never miss a beat.
Enjoy a quick playtime boost and game or stream without battery woes!
BEASTTMMODE
·Experience smooth gaming with synchronized audio and visuals using Airdopes
181Pro.
·When BEASTTMMode is activated, these earbuds deliver up to 50 ms low latency
which eliminates disruptive lag.
·Virtual frames matched with impactful audio elevate gaming every time.
Made for the Gamers – By Gamers, BEASTTMMode reduces the latency significantly
and improves the overall gaming experience.
ENXTMTECHNOLOGY
·Our ENxTMtechnology in the earbud mics cancels background sounds ensuring
that only your voice is communicated over calls, devoid of noise.
·The ENxTM-enabled mics in Airdopes 181Pro analyze your surroundings and
suppress unwanted sounds so that your voice is conveyed clearly in all
possible atmospheres, retaining the audio quality for high clarity.
·You don’t have to activate ENxTMas the 4x mics are equipped with the same and
activated by default.
Deliver your voice without interruptions everywhere traffic, railway
stations, airports, workspace, literally wherever you are!
CAUTIONARY WARNINGS
·Please do not dismantle the product as it can lead to a fire or electrical
breakdown and completely damage the product. Maintenance or servicing of the
earbuds must be done only through a qualified service provider/manufacturer.
·Please do not use any oily/volatile liquid to clean the earbuds.
·Please do not use the earbuds in extremely hot or cold temperatures.
·Any damage to the earbuds that is NOT a manufacturing issue will make the
product’s warranty null and void.
·Do not use the earbuds when it is unsafe to wear them, such as while driving,
crossing the street, or any other activity where full awareness of your
surroundings is required.
·To avoid damage to your hearing, make sure that the volume on your media
device is at an appropriate level as continuous exposure to noise levels at or
above 85 dB can gradually lead to a loss of hearing.
RECOMMENDATION
The earbuds may start at 100%volume level when first switched on. You can
adjust the volume to your preferred level using the volume controls on your
phone/media device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>